13.340.01 防护设备综合 标准查询与下载

T/CMISHA 2002-2023 摩托车乘员肢体碰撞防护护具技术规范

本文件界定了摩托车乘员肢体护具碰撞防护技术的术语和定义，规定了防护区域及护具分类、技术要求和设备，描述了相应的测试方法，给出了标识及制造商提供的信息。

Technical specification for protectors against mechanical impact of motorcyclists' limbs and trunk

T/QGCML 724-2023 防坠落锚索装置

本文件规定了防坠落锚索装置的术语和定义、构成原理、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于煤矿开采作业中所使用的防坠落锚索装置的生产和检验。

Fall arrest anchor device

KS K ISO 18639-1:2022 从事特定救援活动的消防员用PPE防护服.第1部分:总则

PPE ensembles for firefighters undertaking specific rescue activities — Part 1: General

KS K ISO 18639-1-2022 从事特定救援活动的消防员用PPE防护服.第1部分:总则

PPE ensembles for firefighters undertaking specific rescue activities — Part 1: General

ASTM E3110/E3110M-22 防弹躯干防弹衣和射击包的弹道极限数据收集的标准试验方法

1.1 This test method addresses the collection of ballistic limit data for ballistic-resistant torso body armor and shoot packs. 1.2 This test method is intended for testing of soft body armor, hard armor plates, and shoot packs. This test method does not apply to ballistic helmets. 1.3 This test method describes procedures for collecting data and does not specify computation or performance criteria for the ballistic limit. Instructions for computation and performance criteria are specified in other standards and specifications. 1.4 Several commonly used test item mounting procedures and ballistic limit procedures are included in this test method; certifiers, purchasers, and other users will specify the procedures to be used. 1.5 This test method does not address conditioning of test items. 1.6 It is anticipated that this test method will be referenced by certifiers, purchasers, or other users to meet their specific needs. 1.6.1 Certifier, purchasers, and other users will specify and describe the ballistic test threats to be used. Within this test method, the reference will be called the “test threats document.” 1.6.2 Certifiers, purchasers, and other users will provide specific instructions for the determination of complete penetrations or partial penetrations. 1.6.3 In this test method, “other standards and specifications” and “unless specified elsewhere” refer to documents (for example, military standards, purchase specifications) that require the use of this test method. Certifiers, purchasers, and other users are responsible for the “other standards and specifications” and for specifying any requirements that supersede those of this test method. 1.7 Units—The values stated in either SI units or inchpound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.7.1 The user of this standard will identify the system of units to be used, and it is critical to ensure that any crossreferenced standards maintain consistency of units between standards. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Collection of Ballistic Limit Data for Ballistic-resistant Torso Body Armor and Shoot Packs

ASTM E2301-12(2022) 高能见度交通控制和个人安全应用用荧光反光板和标记材料的昼间比色特性的标准试验方法:45°:正常几何

1.1 This test method describes the instrumental measurement of the colorimetric properties (CIE tristimulus values, luminance factors, and chromaticity coordinates) of fluorescent-retroreflective sheeting and marking materials when illuminated by daylight. 1.2 This test method is generally applicable to any sheeting or marking material having combined fluorescent and retroreflective properties used for daytime high visibility traffic control and personal safety applications. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:No

T/SHFA 003-2022 净气型核酸采样亭

外形尺寸偏差 净气型核酸采样亭的外形尺寸及其偏差应符合表1的要求,合同规定除外。 表1　外形尺寸及其偏差 序号　检验项目　要求　项目分类 　　　基本　一般 1　单工位采样亭　亭内净长、宽　长≥1200 ㎜，宽≥1200 ㎜　　 2　　亭内净高　≥2000 ㎜　　 3　多工位采样亭　亭内净长、宽　两工位及以上：长≥1500 ㎜，宽≥1200 ㎜　　 4　　亭内净高　≥2000 ㎜　　 5　其他　亭底脚高度　100 ㎜～200 ㎜　　 6　　门及门框　高1800 ㎜～2200 ㎜，宽 750 ㎜～800 ㎜　　 7　产品外形尺寸极限偏差　产品外形宽、深、高尺寸的极限偏差为±10 ㎜，配套或组合产品的极限偏差应同取正值或负值　　 形状和位置公差 净气型核酸采样亭的形状和位置公差应符合表2的要求。  表2　形状和位置公差  单位为毫米 序号　检验项目　要求　项目分类 　　　基本　一般 1　翘曲度　台面/桌面　≥1400　≤3.0　　 　　　（700，1400）　≤2.0　　 　　　≤700　≤1.0　　 2　邻边垂直度　亭框架门、窗框架及面板　对角长度　≥1000　长度差≤6　　 　　　　

Purified Nucleic acid sampling station

T/SICCA 015-2022 净气型核酸采样亭

5.1 外形尺寸偏差 5.2 形状和位置公差 5.3 材料要求 5.4 外观要求 5.5 人类工效学 5.6 结构要求 5.7 功能要求 5.8 安全要求 5.9 标识要求 5.10 使用说明

Purified Nucleic acid sampling station

T/COSHA 010-2022 地铁车站突发事件应急管理工作规范

该标准针对地铁车站可能遇到的设施设备故障等营运突发事件、气象灾害等自然灾害事件、恐怖袭击等社会安全事件、传染病疫情等公共卫生事件的应急准备、应急响应、应急处置、善后等应急管理工作内容提出了基本工作规范。

Specification for emergency management work of subway station

ISO/TS 20141:2022 个人安全.个人防护设备.个人防护装备兼容性试验指南

Personal safety — Personal protective equipment — Guidelines on compatibility testing of PPE

T/QGCML 297-2022 矿山救援BG4正压氧气呼吸器战前检查技术指南

本文件规定了矿山救援 BG4正压氧气呼吸器战前检查技术指南的术语和定义、总则、仪器检查、战前检查步骤、注意事项等。 本文件适用于矿山救护专职和兼职人员使用BG4正压氧气呼吸器，在有毒有害气体积聚、缺氧、烟雾等环境中，进行抢险救灾或者从事安全技术工作前的战前检查。 使用空气呼吸器、潜水呼吸器和负压氧气呼吸器不在本文件适用范围内。

Mine Rescue BG4 Positive Pressure Oxygen Breathing Apparatus Pre-war Inspection Technical Guide

T/ZJCX 0011-2022 可移动式室外核酸采样工作站（采样小屋）

本文件规定了可移动式室外核酸采样工作站（采样小屋）（以下简称采样工作站）的术语和定义、工作站分类、技术要求、试验方法、标签、标记和说明书。 本文件适用于面向社会的室外便民核酸采样服务的采样工作站。

Transportable Outdoor Nucleic Acid Sampling Workstation （Sampling Cabin）

ASTM F2302-22 提供耐热或明火偶然暴露防护服标签的标准性能规范

1.1 This specification provides minimum requirements for labeling protective clothing offering heat, flame, and melting resistance for applications where the potential exists for incidental exposure to open flame, radiant heat sources, or hot surfaces which could melt or ignite materials. 1.1.1 Examples of possible applications for this specification include safety apparel, including high-visibility safety apparel, in situations where the possibility exists for accidental contact with hot surfaces, radiant heat sources, or an open flame; clothing worn by individuals for chemical, liquid, or particle protection where the possibility exists for clothing to similarly contact a burner or similar low-intensity flame source; or other clothing worn by individuals that comes in contact with torch flames, hot piping, or other surfaces that melt, degrade, or ignite clothing materials by proximity or contact. 1.1.2 This specification is not to be used for separate claims for flame resistance (“FR”), heat resistance, or protection against the transfer of thermal energy. Instead, clothing materials are required to be evaluated for the combination of flame and heat resistance tests. 1.1.3 This specification does not include a test for establishing protection levels against specific hazards where clothing insulation is needed such as from flash fires, exposure to high-energy electrical arc, or extended duration fires. This specification does not replace and shall not be used in lieu of existing standards where well-defined criteria are established for protection of workers from known characterized intense thermal hazards such as flash fires (NFPA 2112), high-energy electrical arc (Specification F1506), or wildland firefighting (NFPA 1977). See Appendix X1 for a list of standards for heat and flame-resistant protective clothing. 1.1.4 This specification includes requirements that define resistance to melting and combustion of materials used in personal protective clothing in a manner to limit the contribution of the clothing for causing injury to the wearer when exposed to low levels of heat or flame. The primary mechanisms by which a garment can contribute to injury are by the garment igniting and supporting combustion, and if the garment melts onto the wearer’s skin. 1.1.5 This specification is applicable to all materials used in the construction of the protective clothing, including lining materials and materials that contact the skin or underclothing of the wearer. Exclusions are permitted for some materials such as labels and small components that do not come in contact with the wearer’s skin or underclothing. 1.1.6 This specification does not include testing for the evaluation of the entire clothing item. 1.1.7 This specification does not include procedures for testing of gloves or footwear. 1.1.8 This specification is applicable to hoods, balaclavas, shrouds, neck gaiters, barrier face coverings, and other items of apparel that are primarily worn on the individual wearer’s head. 1.2 This specification does not apply to protective clothing that is addressed in other standards for specific applications including electrical arc flash, flash fire, and various types of firefighting or emergency response. See Appendix X1 for a list of standards for heat and flame-resistant protective clothing. 1.3 The values stated in SI units or in other units shall be regarded separately as standard. The values stated in each system must be used independently of the other, without combining values in any way. 1.4 This standard measures and describes the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions. 1.5 The following precautionary caveat pertains only to the test methods portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1 This specification is under the jurisdiction of ASTM Committee F23 on Personal Protective Clothing and Equipment and is the direct responsibility of Subcommittee F23.80 on Flame and Thermal. Current edition approved March 1, 2022. Published March 2022. Originally approved in 2003. Last previous edition approved in 2020 as F2302 – 20. DOI: 10.1520/F2302-22. Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. 1 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Performance Specification for Labeling Protective Clothing Which Provides Resistance to Incidental Exposures to Heat or Open Flame

T/CCSAS 015-2022 气体检测报警仪安全使用及维护规程

本文件给出了气体检测报警仪的基本规定、使用和维护、人员培训方面的管理要求。 本文件适用于可能存在有毒有害、易燃易爆气体（蒸气）泄漏，以及作业过程中可能无序释放危险气体的企业。

Code for safe use and maintenance of gas detector

T/GDIAEM 102-2021 家庭应急包

规定了家庭应急包（简称应急包）的功能要求、技术要求、试验方法以及标志、包装、运输、贮存、防伪和补给的相关要求。

Family emergency kit

DB3305/T 212-2021 乡镇（街道）劳动人事争议调解工作规范

Township (street) Labor and Personnel Dispute Mediation Work Specifications

T/SHFIA 000022-2021 市政井盖信物融合监测系统技术规范

城市管廊的兴建为城市生活带来极大便利，但同时也增加了城市安全运行隐患，尤其是管廊安装市政井盖位置，由于市政井盖的倾斜、位移、破损、被偷盗等情况时有发生，对城市应急管理提出了严峻挑战。 通过以具有倾角变化事件感知与实时传输功能的井盖智能终端为核心开展市政井盖信物融合监测系统部署，可实现市政井盖状态的智能信息化监测，支撑优化井盖及管廊日常维护管理工作，亦可为应急管理提供重要数据支撑和管理抓手，提升城市安全管理水平。在大力推进本系统行业应用的同时，为保障产品及系统安全运行、稳定可靠、规范性和前瞻性，特制定本行业团体标准。

Technical specification for municipal manhole cover cyber-physical monitoring system

ASTM F2894-21 使用热空气循环烘箱评估材料、防护服和设备耐热性的标准试验方法

1.1?This test method covers quantitative measurements and subjective observations that characterize the performance for evaluating the heat resistance of materials, protective clothing, and equipment when exposed in a hot air circulating oven. 1.2?This test method is intended t

Standard Test Method for Evaluation of Materials, Protective Clothing, and Equipment for Heat Resistance Using a Hot Air Circulating Oven

GSO ISO 18639-1:2021 从事特定救援活动的消防员的个人防护装备套装 第1部分：概述

ISO 18639 series of standards specify requirements of personal protective equipment (PPE) specifically designed to protect firefighters from injury and/or loss of life while engaged in specific rescue activities. ISO 18639 series provides the principles that govern the development of incident type and/or hazard specific minimum test methods including design and performance requirements for personal protective equipment (PPE) worn by firefighters and other rescue workers to reduce injury and/or the loss of life while engaged in rescue activities. To assist with selection based on a risk assessment (see Annex C), type of PPE, (if applicable) and performance levels, for different categories of protection are included. ISO 18639-1:2018 covers PPE for use in the rescue activities for road traffic crash (RTC) and urban search and rescue (USAR), but could also include other rescue activities depending on the risk assessment. ISO 18639-1:2018 does not include PPE for use in high risk fire exposures. Similarly, this document does not include PPE to protect against chemical and biological hazards, except against short term and accidental exposures whilst engaged in rescue activities. ISO 18639-1:2018 describes the general structure of the ISO 18639 series, including each subsection, sets design and performance requirements for PPE and includes requirements for marking and manufacturer's instructions.

PPE ensembles for firefighters undertaking specific rescue activities — Part 1: General

DB23/T 1496.15-2021 劳动防护用品配备 第15部分：医药生产人员

Equipment for Labor Protection Part 15: Medical Production Personnel