13.340.01 (Protective equipment in general) 标准查询与下载

ASTM F2894-14 采用热风循环烤炉评估耐热用材料, 防护服和设备的标准试验方法

5.1 This test method is used to evaluate the heat resistance of materials, clothing and equipment when exposed to heat in a hot air circulating oven. The principal findings of this test method are observations of the specimen response to the heat exposure. 5.1.1 The majority of procedures specified in this test method apply to the evaluation of flat material specimens. 5.1.2 When evaluating non-flat materials, alternative procedures are required for mounting specimens and interpreting the effects of the heat exposure. 5.2 If specified, this test method is used for the measurement of material dimensional change following a convective heat exposure in a hot air circulating oven. 5.3 This test method is not intended to simulate the actual exposure of material, clothing or equipment in high heat conditions such as a fire environment. 1.1 This test method covers quantitative measurements and subjective observations that characterize the performance for evaluating the heat resistance of materials, protective clothing and equipment when exposed in a hot air circulating oven. 1.2 This test method is intended to evaluate physical changes in materials, protective clothing and equipment at a specified heat exposure. 1.2.1 The specified heat exposure in the hot air circulating oven is a combination of convective heat and radiant heat. 1.3 Materials, protective clothing and equipment are evaluated for visible changes or subjected to a material property measurement following a specified heat exposure. 1.3.1 This test method is not to be used for the evaluation of sticking. An acceptable method for evaluating sticking of fabrics is described in NFPA 1975, Sections 7.2.1 and 8.3. The NFPA 1975 test method evaluates the thermal stability of specimens by assessing the blocking of folded specimens placed between glass plates, under a specified weight, inside an oven meeting the same characteristics of the oven used in this test method. 1.4 This test method enables the quantitative measurement of dimensional change that occurs as a result of a specified heat exposure in a hot air circulating oven. 1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to other units that are commonly used for thermal testing. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.Note 1—Flame resistant and heat resistant materials are described in a range of different standards and meet a range of different requirements. For materials tested in accordance with this test method, the applicable standard shall be used to establish preconditioning, conditioning and testing conditions and requirements.

Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven

ASTM F2894-12 采用热空气循环炉对材料,防护服及设备的耐热性进行评估的标准试验方法

This test method is used to evaluate the heat resistance of materials, clothing and equipment when exposed to combination of convective heat and radiant heat in a hot air circulating oven. The principal findings of this test method are observations of the specimen response to the heat exposure. The majority of procedures specified in this test method apply to the evaluation of flat material specimens. When evaluating non-flat materials, alternative procedures are required for mounting specimens and interpreting the effects of the heat exposure. If specified, this test method is used for the measurement of material shrinkage following a convective heat exposure in a hot air circulating oven. This test method is not intended to simulate the actual exposure of material, clothing or equipment in high heat conditions such as a fire environment.1.1 This test method covers quantitative measurements and subjective observations that characterize the performance for evaluating the heat resistance of materials, protective clothing and equipment when exposed in a hot air circulating oven. 1.2 This test method is intended to evaluate physical changes in materials, protective clothing and equipment at a specified heat exposure. 1.2.1 The specified heat exposure in the hot air circulating oven is a combination of convective heat and radiant heat. 1.3 Materials, protective clothing and equipment are evaluated for visible changes or subjected to a material property measurement following a specified heat exposure. 1.4 This test method enables the quantitative measurement of shrinkage that occurs as a result of a specified heat exposure in a hot air circulating oven. 1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to other units that are commonly used for thermal testing. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 18212;Flame resistant and heat resistant materials are described in a range of different standards and meet a range of different requirements. For materials tested in accordance with this test method, the applicable standard shall be used to establish preconditioning, conditioning and testing conditions and requirements.

Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven

ASTM F2894-12a 使用热风循环烤炉评估耐热用材料, 防护服和设备的标准试验方法

This test method is used to evaluate the heat resistance of materials, clothing and equipment when exposed to combination of convective heat and radiant heat in a hot air circulating oven. The principal findings of this test method are observations of the specimen response to the heat exposure. The majority of procedures specified in this test method apply to the evaluation of flat material specimens. When evaluating non-flat materials, alternative procedures are required for mounting specimens and interpreting the effects of the heat exposure. If specified, this test method is used for the measurement of material shrinkage following a convective heat exposure in a hot air circulating oven. This test method is not intended to simulate the actual exposure of material, clothing or equipment in high heat conditions such as a fire environment.1.1 This test method covers quantitative measurements and subjective observations that characterize the performance for evaluating the heat resistance of materials, protective clothing and equipment when exposed in a hot air circulating oven. 1.2 This test method is intended to evaluate physical changes in materials, protective clothing and equipment at a specified heat exposure. 1.2.1 The specified heat exposure in the hot air circulating oven is a combination of convective heat and radiant heat. 1.3 Materials, protective clothing and equipment are evaluated for visible changes or subjected to a material property measurement following a specified heat exposure. 1.4 This test method enables the quantitative measurement of shrinkage that occurs as a result of a specified heat exposure in a hot air circulating oven. 1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to other units that are commonly used for thermal testing. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 18212;Flame resistant and heat resistant materials are described in a range of different standards and meet a range of different requirements. For materials tested in accordance with this test method, the applicable standard shall be used to establish preconditioning, conditioning and testing conditions and requirements.

Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven

ASTM F2894-12b 使用热风循环烤炉评估耐热用材料, 防护服和设备的标准试验方法

This test method is used to evaluate the heat resistance of materials, clothing and equipment when exposed to heat in a hot air circulating oven. The principal findings of this test method are observations of the specimen response to the heat exposure. The majority of procedures specified in this test method apply to the evaluation of flat material specimens. When evaluating non-flat materials, alternative procedures are required for mounting specimens and interpreting the effects of the heat exposure. If specified, this test method is used for the measurement of material dimensional change following a convective heat exposure in a hot air circulating oven. This test method is not intended to simulate the actual exposure of material, clothing or equipment in high heat conditions such as a fire environment.1.1 This test method covers quantitative measurements and subjective observations that characterize the performance for evaluating the heat resistance of materials, protective clothing and equipment when exposed in a hot air circulating oven. 1.2 This test method is intended to evaluate physical changes in materials, protective clothing and equipment at a specified heat exposure. 1.2.1 The specified heat exposure in the hot air circulating oven is a combination of convective heat and radiant heat. 1.3 Materials, protective clothing and equipment are evaluated for visible changes or subjected to a material property measurement following a specified heat exposure. 1.3.1 This test method is not to be used for the evaluation of sticking. An acceptable method for evaluating sticking of fabrics is described in NFPA 1975, Sections 7.2.1 and 8.3. The NFPA 1975 test method evaluates the thermal stability of specimens by assessing the blocking of folded specimens placed between glass plates, under a specified weight, inside an oven meeting the same characteristics of the oven used in this test method. 1.4 This test method enables the quantitative measurement of dimensional change that occurs as a result of a specified heat exposure in a hot air circulating oven. 1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to other units that are commonly used for thermal testing. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 18212;Flame resistant and heat resistant materials are described in a range of different standards and meet a range of different requirements. For materials tested in accordance with this test method, the applicable standard shall be used to establish preconditioning, conditioning and testing conditions and requirements.

Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven