13.340.40 防护手套 标准查询与下载

KS K ISO 21420-2023 防护手套.一般要求和试验方法

Protective gloves — General requirements and test methods

KS K ISO 18639-4:2022 从事特定救援活动的消防员用PPE防护服.第4部分:手套

PPE ensembles for firefighters undertaking specific rescue activities — Part 4: Gloves

KS K ISO 18639-4-2022 从事特定救援活动的消防员用PPE防护服.第4部分:手套

PPE ensembles for firefighters undertaking specific rescue activities — Part 4: Gloves

T/ZZB 2940-2022 丁腈浸胶防护手套

本文件规定了丁腈浸胶防护手套（以下简称手套）的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、标识、包装、运输、 贮存和质量承诺。 本文件适用于以超高分子量聚乙烯纤维为主材料编织成的手胚，经表面浸渍丁腈胶所制成的一般防护用手套。

Nitrile butadiene rubber protective glove

T/BYXT 008-2022 稀土抗抑菌手套

一、分类：稀土抗抑菌手套以功能用途、制备材料分类，应符合如下要求： 分类号　类别　产品名称　生产标准 01　家用手套　稀土抗抑菌橡胶家用手套　HG/T 2888 02　　稀土抗抑菌聚氯乙烯家用手套　QB/T 5607 03　手部防护手套　稀土抗抑菌手部机械危害防护手套　GB 24541 04　　稀土抗抑菌手部化学品及微生物防护手套　GB 28881 05　　稀土抗抑菌手部防寒手套　GB/T 38304 06　　稀土抗抑菌手部防热伤害手套　GB/T 38306 07　　稀土抗抑菌手部电离辐射及放射性污染物防护手套　GB 38452 08　医用手套　稀土抗抑菌一次性使用灭菌橡胶外科手套　GB/T 7453 09　　稀土抗抑菌一次性使用医用橡胶检查手套　GB 10213 10　　稀土抗抑菌一次性使用聚氯乙烯医用检查手套　GB 24786 11　　稀土抗抑菌一次性使用非灭菌橡胶外科手套　GB 24787 12　民用手套　稀土抗抑菌针织民用手套　FZ/T 73047 13　　稀土抗抑菌氨纶手套　QB/T 1617 14　劳动防护手套　稀土抗抑菌带电作业用绝缘手套　GB/T 17622 15　　稀土抗抑菌防静电手套　GB/T 22845 16　　稀土抗抑菌织物浸渍胶乳防护手套　GB/T 32103 17　　稀土抗抑菌消防手抗抑菌套　XF 7 18　　稀土抗抑菌涂胶防振手套　FZ/T 73039 19　　稀土抗抑菌高温高热作业防护手套　FZ/T 73040 20　　稀土抗抑菌劳动防护手套　LD 34 21　　稀土抗抑菌滑雪手套　FZ/T 74004 二、抗抑菌要求： 产品牌号及抗抑菌基础材料载锌抗抑菌粉组分，应符合以下要求。 产品牌号　                        产品名称　                                                 载锌抗抑菌粉a含量(质量分数/%)　组分方法 REA-GLOVES01-2Nb　稀土抗抑菌橡胶家用手套　                          0.1-5　                                        掺混法 REA-GLOVES02-2N　稀土抗抑菌聚氯乙烯家用手套　　 REA-GLOVES03-2N　稀土抗抑菌手部机械危害防护手套　　 REA-GLOVES04-2N　稀土抗抑菌手部化学品及微生物防护手套　　 REA-GLOVES05-2N　稀土抗抑菌手部防寒手套　　 REA-GLOVES06-2N　稀土抗抑菌手部防热伤害手套　　 REA-GLOVES07-2N　稀土抗抑菌手部电离辐射及放射性污染物防护手套　　 REA-GLOVES08-2N　稀土抗抑菌一次性使用灭菌橡胶外科手套　　 REA-GLOVES09-2N　稀土抗抑菌一次性使用医用橡胶检查手套　　 REA-GLOVES10-2N　稀土抗抑菌一次性使用聚氯乙烯医用检查手套　　 REA-GLOVES11-2N　稀土抗抑菌一次性使用非灭菌橡胶外科手套　　 REA-GLOVES12-2N　稀土抗抑菌针织民用手套　　 REA-GLOVES13-2N　稀土抗抑菌氨纶手套　　 REA-GLOVES14-2N　稀土抗抑菌带电作业用绝缘手套　　 REA-GLOVES15-2N　稀土抗抑菌防静电手套　　 REA-GLOVES16-2N　稀土抗抑菌织物浸渍胶乳防护手套　　 REA-GLOVES17-2N　稀土抗抑菌消防手抗抑菌套　　 REA-GLOVES18-2N　稀土抗抑菌涂胶防振手套　　 REA-GLOVES19-2N　稀土抗抑菌高温高热作业防护手套　　 REA-GLOVES20-2N　稀土抗抑菌劳动防护手套　　 REA-GLOVES21-2N　稀土抗抑菌滑雪手套　　 a   稀土抗抑菌基础材料载锌抗抑菌粉，应符合T/BYXT 003.1-2022第4章的要求。 b   产品牌号参考GB/T 17803的表示方法，第一层用稀土抗抑菌（Rare earth antibacterial）首字母“REA”表示；第二层“GLOVES01”表示分类号为01的手套产品（“GLOVES”为手套英文名称）；第三层“2N”表示抗抑菌率为99%，（2为“9”的个数，“N”为数字“9”的英文首字母）。 6.1.2 抗抑菌性能应达到五星级，抗抑菌指标应符合如下要求： 项目　抑菌率　抗菌率　新冠病毒抑制率　防霉等级　抗抑菌等级 指标　≥99%　≥99%　≥99%　0级　★★★★★ 注：稀土抗抑菌手套应根据产品对抗抑菌功能的需求，选择相应的抗抑菌功能项目，应符合5.2的要求。 三、内在质量要求： 1 稀土抗抑菌橡胶家用手套，应符合HG/T 2888-2010第5章的规定。 2 稀土抗抑菌聚氯乙烯家用手套，应符合QB/T 5607-2021第5章的规定。 3 稀土抗抑菌手部机械危害防护手套，应符合GB 24541-2009第4章的规定。 4 稀土抗抑菌手部化学品及微生物防护手套，应符合GB 28881-2012第4章的规定。 5 稀土抗抑菌手部防寒手套，应符合GB/T 38304-2019第4章的规定。 6 稀土抗抑菌手部防热伤害手套，应符合GB/T 38306-2019第4章的规定。 7 稀土抗抑菌手部电离辐射及放射性污染物防护手套，应符合GB 38452-2019第4章的规定。 8 稀土抗抑菌一次性使用灭菌橡胶外科手套，应符合GB/T 7453-2020第6章的规定。 9 稀土抗抑菌一次性使用医用橡胶检查手套，应符合GB 10213-2006第6章的规定。 10 稀土抗抑菌一次性使用聚氯乙烯医用检查手套，应符合GB 24786-2009第6章的规定。 11 稀土抗抑菌一次性使用非灭菌橡胶外科手套，应符合GB 24787-2009第6章的规定。  12 稀土抗抑菌针织民用手套，应符合FZ/T 73047-2013第4章的规定。 13 稀土抗抑菌氨纶手套，应符合QB/T 1617-1992第3章的规定。 14 稀土抗抑菌带电作业用绝缘手套，应符合GB/T 17622-1998第5章的规定。 15 稀土抗抑菌防静电手套，应符合GB/T 22845-2009第5章的规定。 16 稀土抗抑菌织物浸渍胶乳防护手套，应符合GB/T 32103-2015第5章的规定。 17 稀土抗抑菌消防手套，应符合XF 7-2004第6章的规定。 18 稀土抗抑菌涂胶防振手套，应符合FZ/T 73039-2010第4章的规定。 19 稀土抗抑菌高温高热作业防护手套，应符合FZ/T 73040-2010第5章的规定。 20 稀土抗抑菌劳动防护手套，应符合LD 34-1992第4章的规定。 21 稀土抗抑菌滑雪手套，应符合FZ/T 74004-2016第5章的规定。 四、标志 1 每只手套应有规格标识。 2 包装袋上应注明产品牌号、名称、商标、标准号、规格、使用说明、生产厂名、厂址、生产日期或生产批号、失效日期。 3 包装箱上应注明产品牌号、名称、商标、标准号、规格、生产厂名、厂址、数量、颜色、生产日期或生产批号、防潮、防晒标识。 4 符合稀土抗抑菌评价要求的产品，可在产品包装箱、包装袋标识“抗菌、抑菌、抑制病毒、防霉”等文字说明。还应有T/BYXT 002规定的稀土抗抑菌标准化评价标识。 5 评价标识应符合T/BYXT 001-2022第9.1章的要求。

Rare earth antibacterial gloves

KS K ISO 23388:2022 防机械危险的防护手套

Protective gloves against mechanical risks

KS K ISO 23388-2022 防机械危险的防护手套

Protective gloves against mechanical risks

CEN ISO/TR 8546:2022 手部防护 选择和使用指南（ISO/TR 8546:2022）

This document gives information on the selection and use of personal protective equipment for the hand protection. The application of this document requires that the risk assessment has been carried out and the hazards have been minimized accordingly through substitution and technical and organizational measures. On this basis, this document contains information that supports employers in counteracting certain risks to hands that could not be sufficiently reduced by substitution and technical and organizational measures by selecting and using suitable protective gloves. This document provides explanations on selection, usage and training applicable to protective gloves. The explanations concerning specific hazards are provided in annexes. This guidance considers the following risks: mechanical, (see Annex A); chemical, (see Annex B);- biological, (see Annex C); thermal, (see Annex D and E); electrostatic discharge (see Annex F); ionizing radiation and radioactive contamination (see Annex G). This guidance does not cover other risks, because pertinent international or national publications are available or because the relevant information was not available in ISO/TC 94/SC 13/WG 8. Risks not covered include e.g.: cuts and stabs by hand knives; use of chain saws (covered by ISO 11393-4:2018, Annex A); animal bites; needlesticks; electrocution; optical radiation; vibrations; electric fault arcs; firefighting (covered by ISO/TR 21808); sport.

Hand protection - Guidance for selection and use (ISO/TR 8546:2022)

ISO 21420:2020/Amd 1:2022 防护手套.一般要求和试验方法.修改件1

Protective gloves — General requirements and test methods — Amendment 1

ISO 21420:2020/Amd.1:2022 防护手套 一般要求和测试方法

Protective gloves. General requirements and test methods

ISO/TR 8546:2022 手部防护.选择和使用指南

Hand protection — Guidance for selection and use

BS ISO 23407:2021 防止热风险（热和/或火灾）的防护手套

1   Scope This document specifies requirements, test methods, marking and information for protective gloves and other hand protective equipment against thermal risks for professional use, consumer, domestic use. This document is also applicable to arm protective equipment. It is used for all gloves and other hand protective equipment which protect the hands or part of the hand against heat and/or fire in one or more of the following forms: flame, contact heat, convective heat, radiant heat, small splashes or large quantities of molten metal. This document is only applicable in conjunction with ISO 21420:2020. This document does not apply to gloves for fire-fighters or welding that have their own standards.

Protective gloves against thermal risks (heat and/or fire)

22/30446407 DC BS ISO 18639-4 AMD1 从事特定救援活动的消防员的个人防护装备套装 第 4 部分：手套

BS ISO 18639-4 AMD1. PPE ensembles for firefighters undertaking specific rescue activities - Part 4. Gloves

ASTM F2961-22 用扭矩计表征手套抓握性能的标准试验方法

1.1 This test method is used for evaluating how gloves affect an individual wearer’s ability to grip onto a hard surface object. 1.1.1 This test method establishes procedures for measuring the maximum torque that can be attained by an individual’s bare hand as compared to the maximum torque that is attained by the same individual wearing a glove. The torque is applied to a vertically mounted pole attached to a torque meter. 1.2 This test method is suitable for evaluating gloves and other forms of hand protection that require the wearer to maintain a secure hold on objects. 1.3 This test method does not address all effects of wearing gloves on hand functions. Other test methods include those for evaluating the effect of wearing gloves on dexterity, tactility, and other aspects of functional performance. 1.4 It is the responsibility of the test laboratory to obtain the necessary and appropriate approval(s) required by their institution for conducting tests using human subjects. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter

ISO 23407:2021 热风险防护手套（高温和/或火灾）

This document specifies requirements, test methods, marking and information for protective gloves and other hand protective equipment against thermal risks for professional use, consumer, domestic use. This document is also applicable to arm protective equipment. It is used for all gloves and other hand protective equipment which protect the hands or part of the hand against heat and/or fire in one or more of the following forms: flame, contact heat, convective heat, radiant heat, small splashes or large quantities of molten metal. This document is only applicable in conjunction with ISO 21420:2020. This document does not apply to gloves for fire-fighters or welding that have their own standards.

Protective gloves against thermal risks (heat and/or fire)

BS ISO 25518:2021 一般用途的一次性橡胶手套 规格

Single-use rubber gloves for general applications. Specification

EN ISO 21420:2020/prA1:2021 防护手套 - 一般要求和试验方法 包含修改件prA1,2021

Protective gloves - General requirements and test methods - Amendment 1 (ISO 21420:2020/DAM 1:2021)

OENORM EN 659-2021 消防员防护手套

Protective gloves for firefighters

ISO 10819:2013/Amd 2:2021 机械振动和冲击.手臂振动.手掌手套振动传递率的测量和评估.修改件2

Mechanical vibration and shock — Hand-arm vibration — Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand — Amendment 2

prEN 659-2021 消防员防护手套

Protective gloves for firefighters