13.340.40 防护手套 标准查询与下载

NF S75-504:2010 防护手套.一般要求和试验方法

Protective gloves - General requirements and test methods.

GOST R EN 511-2010 职业安全标准体系.个人护手方法.防寒保护手套

Occupational safety standards system. Personal protective means of hands. Protective gloves against cold. General technical requirements. Test methods

EN 420:2003+A1:2009 防护手套.一般要求和试验方法

This standard defines the general requirements and relevant test procedures for glove design and construction, resistance of glove materials to water penetration, innocuousness, comfort and efficiency, marking and information supplied by the manufacturer applicable to all protective gloves. NOTE It can also be applicable to arm protectors and gloves permanently incorporated in containment enclosures. This European Standard does not address the protective properties of gloves and therefore should not be used alone but only in combination with the appropriate specific European Standard(s). A non exhaustive list of these standards is given in the Bibliography.

Protective gloves - General requirements and test methods

LST EN 659-2003+A1-2008/AC-2009 消防员防护手套

Protective gloves for firefighters

ISO/DIS 374-6 防危险化学品和微生物的防护手套第6部分：理发师防护手套

Protective gloves against dangerous chemicals and micro-organisms — Part 6: Protective gloves for hairdressers

DS/EN 659+A1/AC:2009 消防员防护手套

This standard defines minimum performance requirements and test methods for firefighters' protective gloves.This standard applies only to firefighters' protective gloves which protect the hands during normal firefighting, including search and rescue.These gloves are not intended for deliberate handling of liquid chemicals, but provide some protection against accidental contact with chemicals.Protective gloves for special operations within firefighting service are excluded from the scope of this standard.

Protective gloves for firefighters

GOST R EN 407-2009 职业安全标准体系.手的个人保护方法.防热防火手套.技术规范.测试方法

Occupational safety standards system. Personal protective means of hands. Protective gloves from heat thermal and fire. Tecnical requirements. Test methods

GOST R EN 388-2009 职业安全标准体系.手的个人保护方法.机械危险防护手套.技术要求.测试方法

Occupational safety standards system. Personal protective means of hands. Protective gloves against mechanical risks. Technical requirements. Test methods

GOST R EN 374-2009 职业安全标准体系.手的个人保护.防化学物品和微生物的保护手套.一般技术要求.测试方法

Occupational safety standards system. Personal protection of hands. Protective gloves against chemicals and micro-organisms. General technical requirements. Methods of testing

GSO ISO 13999-1:2008 防护服 防止手动刀击和刺伤的手套和手臂保护器 第1部分：由链甲制成的手套和手臂保护器

This part of ISO 13999 specifies requirements for the design, penetration resistance, ergonomic characteristics, straps, weight, material, marking and instructions for use, of gloves and arm guards. It also specifies the appropriate test methods. This part of ISO 13999 applies to protective chain-mail gloves and to metal and plastics arm guards for use with hand knives.

Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 1: Chain-mail gloves and arm guards

GSO ISO 13999-2:2008 防护服 防止手动刀击和刺伤的手套和手臂保护器 第2部分：由链甲以外的材料制成的手套和手臂保护器

This part of ISO 13999 specifies requirements for the design, cut resistance, penetration resistance, and ergonomic characteristics of cut-resistant gloves, arm guards and protective sleeves made of materials other than chain mail and rigid metal and plastics. They provide less cut and stab protection than the products specified in ISO 13999-1 and are intended to be used only in work where the knife is not finely pointed or it is used only to cut away from the hand and arm.

Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 2: Gloves and arm guards made of material other than chain mail

GSO ISO 13999-3:2008 防护服 防止手动刀击和刺伤的手套和手臂保护器 第3部分：织物、皮革和其他材料的冲击切割测试

This part of ISO 13999 specifies an impact cut test for use on fabric, leather and other materials used in protective clothing, gloves and arm guards. Annex A of this part of ISO 13999 gives recommendations for the specification of impact cut tests on materials and products such as gloves and arm guards and gives the list of information which should be specified in the product standard in order to be able to apply this test.

Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 3: Impact cut test for fabric, leather and other materials

LST EN 659-2003+A1-2008 消防员防护手套

Protective gloves for firefighters

DIN EN 659:2008 消防员用防护手套

This European Standard defines minimum performance requirements and test methods for firefighters' protective gloves. This European Standard applies only to firefighters' protective gloves which protect the hands during normal firefighting, including search and rescue. These gloves are not intended for deliberate handling of liquid chemicals, but provide some protection against accidental contact with chemicals. Protective gloves for special operations within firefighting service are excluded from the scope of this standard.

Protective gloves for firefighters(includes Amendment A1:2008); English version of DIN EN 659:2008-06

DS/EN 659+A1:2008 消防员防护手套

This standard defines minimum performance requirements and test methods for firefighters' protective gloves.This standard applies only to firefighters' protective gloves which protect the hands during normal firefighting, including search and rescue.These gloves are not intended for deliberate handling of liquid chemicals, but provide some protection against accidental contact with chemicals.Protective gloves for special operations within firefighting service are excluded from the scope of this standard.

Protective gloves for firefighters

SANS 416:2007 抗化学腐蚀手套

Covers 6 types of rubber or plastics gloves affording protection against a range of chemicals. Apart from constructional and dimensional requirements, physical and chemical requirements are given for elastomeric materials with or without fabric reinforce

Chemical resistant gloves

JIS T 8114:2007 防震手套

この規格は，鉱業，林業，土木建設業，製造業などの事業場において工具，機械などから手袋を通して作業者の手に伝わる振動(周波数範囲31.5～1250 Hz)を軽減するための防振手袋(以下，手袋という。)について規定する。

Vibration isolation gloves

AQ 6102-2007 耐酸(碱)手套

本标准规定了耐酸碱手套（以下简称“手套”）的技术要求、试验方法和标识。 本标准适用于接触酸碱溶液时戴用的防护手套。

Acid and Alkali Resistant Gloves

AQ 6104-2007 防X线手套

本标准规定了防X线手套（以下简称“手套”）的技术要求和试验方法。 本标准适用于橡胶手套，其他材料的具有防X线性能的手套可参照本标准有关条文执行。

X-ray protective gloves

AQ 6103-2007 焊工防护手套

本标准规定了在手工金属焊接、气割和类似作业中使用的防护手套的要求和试验方法。 本标准适用于在焊接和相关的作业过程中对手部和腕部起保护作用的焊工防护手套。 本标准不适用于特殊焊接作业使用的防护手套。

Protective gloves for welders