13.340.40 防护手套 标准查询与下载

NF S75-503:2004 防热危害(高温和/或火焰)的手套

Protective gloves against thermal risks (Heat and/or fire).

DIN EN 407:2004 防热危害的手套(高温和/或火焰)

Protective gloves against thermal risks (heat and/or fire); German version EN 407:2004

DS/EN 407:2004 防热风险（热和/或火）的防护手套

This document specifies requirements, test methods, information to be supplied and marking for protective gloves against heat and/or fire. It should be used for all gloves which protect the hands against heat and/or flames in one or more of the following forms: fire, contact heat, convective heat, radiant heat, small splashes or large quantities of molten metal.

Protective gloves against thermal risks (heat and/or fire)

BS EN 407:2004 防热保护手套(热和/或火)

This document specifies requirements, test methods, information to be supplied and marking for protective gloves against heat and/or fire. It should be used for all gloves which protect the hands against heat and/or flames in one or more of the following forms: fire, contact heat, convective heat, radiant heat, small splashes or large quantities of molten metal. This standard is only applicable in conjunction with EN420. There are other standards relevant to specific applications, as for example fire-fighting or welding. Product tests may only give performance levels and not protection levels.

Protective gloves against thermal risks (heat and/or fire)

EN 407:2004 防热危害的手套(高温和/或火焰)

This document specifies requirements, test methods, information to be supplied and marking for protective gloves against heat and/or fire. It should be used for all gloves which protectThe hands against heat and/or flames in one or more of the following forms:fire, contact heat, convective heat, radiant heat, small splashes or large quantities of molten metal.

Protective gloves against thermal risks (heat and/or fire)

DS/EN 60903:2004 带电工作 绝缘材料手套

This International Standard is applicable to : - insulating gloves and mitts which should normally be used in conjunction with leather protector gloves worn over the insulating gloves to provide mechanical protection; - insulating gloves and mitts usable without over-gloves for mechanical protection. Unless otherwise stated, the use of the term ""glove"" includes both gloves and mitts. The use of the term ""insulating gloves"" designates gloves providing electrical protection only. The use of the term ""composite gloves"" designates gloves providing electrical and mechanical protections.

Live working - Gloves of insulating material

LST EN 374-2-2004 防化学品和微生物的防护手套 第2部分：抗渗透性的测定

Protective gloves against chemicals and micro-organisms - Part 2: Determination of resistance to penetration

NF S75-501-1:2004 防化学品和微生物的手套.第1部分:术语和性能要求

Protective gloves against chemicals and micro-organisms - Part 1: terminology and performance requirements

NF S75-501-2:2004 防化学品和微生物的手套.第2部分:耐渗透性测定

Protective gloves against chemicals and micro-organisms - Part 2: determination of resistance to penetration

NF S75-501-3:2004 防化学品和微生物的手套.第3部分:耐化学品渗透性的测定

Protective gloves against chemicals and micro-organisms - Part 3: determination of resistance to permeation by chemicals

NF S75-502:2004 防机械危险的防护手套

Protective gloves against mechanical risks.

LST EN 388-2004 防止机械风险的防护手套

Protective gloves against mechanical risks

DIN EN 388:2003 防机械危害的手套

Protective gloves against mechanical risks; German version EN 388:2003

DIN EN 374-1:2003 耐化学腐蚀和微生物的防护手套.第1部分:术语和性能要求

The document specifies the requirements for gloves to protect the user against chemicals and/or micro-organisms and defines terms to be used. It should be used in conjunction with EN 420. It does not specify requirements for protection against any mechanical hazards.

Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements; German version EN 374-1:2003

DIN EN 374-3:2003 耐化学腐蚀和微生物的防护手套.第3部分:耐化学品渗透性的测定

This European Standard specifies the determination of the resistance of protective glove materials to permeation by potentially hazardous non-gaseous chemicals under the condition of continuous contact. It is emphasized that the test does not represent conditions likely to be found in service, and the use of test data should be restricted to comparing materials chiefly on a relative basis in broad categories of breakthrough times.#,,#

Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals; German version EN 374-3:2003

DIN EN 374-2:2003 耐化学腐蚀和微生物的防护手套.第2部分:耐渗透性的测定

This document specifies a test method for the penetration resistance of gloves that protect against chemicals and/or micro-organisms. At this time it is believed that gloves which resist penetration, when tested according to this part of EN 374, will form an effective barrier to micro-biological hazards.

Protective gloves against chemicals and micro-organisms - Part 2: Determination of resistance to penetration; German version EN 374-2:2003

DS/EN 374-1:2003 防化学品和微生物的防护手套 第1部分：术语和性能要求

This standard specifies the requirements for gloves to protect the user against chemicals and/or micro-organisms and defines terms to be used. This standard should be used in conjunction with EN 420. This standard does not specify requirements for protection against any mechanical hazards.

Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements

DS/EN 388:2003 防止机械风险的防护手套

This standard specifies requirements, test methods, marking and information to be supplied, for protective gloves against the mechanical risks of abrasion, blade cut, tear and puncture. This standard is only applicable in conjunction with EN 420. The test methods developed in this standard can also be applicable to arm protectors which are protective devices separate from the glove or the clothing.

Protective gloves against mechanical risks

DS/EN 374-3:2003 防化学品和微生物的防护手套 第3部分：耐化学品渗透性的测定

This standard specifies the determination of the resistance of protective glove materials to permeation by potentially hazardous non-gaseous chemicals under the condition of continuous contact. It is emphasised that the test does not represent conditions likely to be found in service, and the use of test data should be restricted to comparing materials chiefly on a relative basis in broad categories of breakthrough times.

Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals

DS/EN 374-2:2003 防化学品和微生物的防护手套 第2部分：抗渗透性的测定

This standard specifies a test method for the penetration resistance of gloves that protect against chemicals and/or micro-organisms. At this time it is believed that gloves which resist penetration, when tested according to this Part of EN 374, will form an effective barrier to micro-biological hazards.

Protective gloves against chemicals and micro-organisms - Part 2: Determination of resistance to penetration