13.340.60 标准查询与下载

BS EN 1263-1:2014 临时工程设备. 安全网. 安全要求和试验方法

Temporary works equipment. Safety nets. Safety requirements, test methods

EN 1263-2:2014 安全网.第2部分:定位区域的安全要求

This European Standard specifies safety requirements for the positioning of safety nets in accordance with the manufacturer's instruction manual and with the product specifications and for the testing of system S, system T, system U and system V safety nets in accordance with EN 1263-1. Small safety nets of system S according to EN 1263-1 (less than 35 m 2 and 5,0 m on the shortest side) are not dealt with in this European Standard.

Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits

EN 1263-1:2014 临时工作设备.安全网.第1部分：安全要求,试验方法

This European Standard applies to safety nets and their accessories for use in construction and assembly work to protect from deeper fall. It specifies safety requirements and test methods and is based on the performance characteristics of polypropene and polyamide fibres. Materials used in nets should have no significant reduction in mechanical properties between -10 °C and +40 °C. This European Standard is not applicable to the installation of safety nets. For a European Standard covering the installation of safety nets, see EN 1263-2.

Temporary works equipment - Safety nets - Part 1: Safety requirements@ test methods

DIN EN 353-1:2014 个人防跌落设备. 设有铰链的导向跌落保护装置. 第1部分: 设有刚性铰链的导向跌落保护装置; 德文版本EN 353-1-2014

Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line; German version EN 353-1:2014

NF S71-502-1:2014 个人防跌落设备. 设有铰链的导向跌落保护装置. 第1部分: 设有刚性铰链的导向跌落保护装置

La présente Norme européenne définit les exigences, les méthodes d'essai, le marquage, la notice d'information du fabricant et l'emballage des antichutes mobiles incluant un support d'assurage rigide. Ce support d'assurage est généralement accroché ou intégré à des échelles ou à des barreaux d'ascension fixés de manière adéquate sur des structures appropriées. Les antichutes mobiles incluant un support d'assurage rigide conformes à la présente Norme européenne sont des composants de l'un des systèmes d'arrêt des chutes couverts par l'EN 363.

Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1 : guided type fall arresters including a rigid anchor line

BS EN 353-1:2014 个人防跌落设备. 设有铰链的导向跌落保护装置. 设有刚性铰链的导向跌落保护装置

Personal fall protection equipment. Guided type fall arresters including an anchor line. Guided type fall arresters including a rigid anchor line

EN 353-1:2014 个人防坠落设备.含一个锚线的引导型防跌落装置.第1部分:含刚性锚线的引导型防跌落装置

This European Standard specifies the requirements, test methods, marking, information supplied by the manufacturer and packaging for guided type fall arresters including a rigid anchor line. This anchor line is usually attached to or integrated in ladders or rungs adequately fixed to suitable structures. Guided type fall arresters including a rigid anchor line conforming to this European Standard are components of one of the fall arrest systems covered by EN 363. This European Standard applies to rigid anchor lines which are intended to be installed vertically and/or with a combination of forward-leaning angle and/or sideways leaning angle between the true vertical and the vertical +15° (see Figure 2). Multi-user applications, i.e. rigid anchor lines that allow more than one user to be attached at any one time, are not addressed in this document.

Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line (Incorporates Amendment A1: 2017)

BS PAS 59:2014 互相连接着的缓冲垫构成的防跌落软着陆系统规范

Specification for collective fall arrest soft landing systems

ASTM F2436-14 采用跌落试验测量合成营救绳系索系统性能的标准试验方法

5.1 The types of rope rescue systems to which this test method apply use a tensioned mainline and untensioned belay line. If a fall occurs because of a mainline system failure or misuse, considerable energy must be absorbed by the belay for a successful arrest. This drop test method simulates a “worst case” condition when systems are operated as designed, and is designed to help evaluate and compare the performance of various rope rescue belay systems under such conditions. (See Note 1.) The successful catching of a load does not imply that the tested system is suitable for any and all belaying. See X1.2. Note 1: Higher forces may be encountered under some circumstances, such as the belay being operated with excessive slack. 1.1 This test method covers drop test procedures to measure rope rescue belay system performance. It applies only to belay systems consisting of an untensioned rope connecting the load to an anchored belay device. This test method does not address other types of belays, such as self-belays or belays for lead climbing, nor does it test the rescuer's belaying ability. 1.2 This test method may be used to help measure a rescue belay system's performance under controlled drop test conditions, but it will not necessarily provide guidance as to which belay method is most suited to a particular application. Other considerations, such as ease of handling, performance on different types and diameters of rope, portability, versatility, system safety factor, cost, and automatic operation that do not require the positive action of the belayer may influence the selection of a belay system and are not dealt with in this test method. See X1.1. 1.3 The values stated in SI units are to be regarded as standard. 1.4 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Additional precautions for this test method are given in 8.1 and 8.2.

Standard Test Method for Measuring the Performance of Synthetic Rope Rescue Belay Systems Using a Drop Test

DIN CEN/TS 16415:2013 个人防跌落设备.锚固装置.多人同时使用锚固装置的推荐性操作规程,德文版本CEN/TS 16415-2013

Personal fall protection equipment - Anchor devices - Recommendations for anchor devices for use by more than one person simultaneously; German version CEN/TS 16415:2013

DS/CEN/TS 16415:2013 个人坠落保护设备 锚固装置 多人同时使用的锚固装置推荐

This Technical Specification sets out recommendations for requirements, test apparatus, test methods, marking and information supplied by the manufacturer for anchor devices intended for use by more than one user simultaneously.This Technical Specificatio

Personal fall protection equipment - Anchor devices - Recommendations for anchor devices for use by more than one person simultaneously

CEN/TS 16415:2013 个人坠落保护设备 锚固装置 多人同时使用的锚固装置推荐

This Technical Specification sets out recommendations for requirements, test apparatus, test methods, marking and information supplied by the manufacturer for anchor devices intended for use by more than one user simultaneously. This Technical Specification is not applicable to: - anchor devices intended to allow only one user to be attached at any one time, which are covered by EN 795:2012; - anchor devices used in any sports or recreational activity; - equipment designed to conform to EN 516 or EN 517; - elements or parts of structures which were installed for use other than as anchor points or anchor devices, e.g. beams, girders; - structural anchors. NOTE Requirements, test methods, marking and information supplied by the manufacturer for anchor devices intended for use by a single user are covered by European Standard EN 795:2012.

Personal fall protection equipment - Anchor devices - Recommendations for anchor devices for use by more than one person simultaneously

PD CEN/TS 16415:2013 个人摔落保护设备-锚设备建议锚设备供多人同时使用

This Technical Specification sets out recommendations for requirements, test apparatus, test methods,marking and information supplied by the manufacturer for anchor devices intended for use by more than one user simultaneously.This Technical Specification is not applicable to: anchor devices intended to allow only one user to be attached at any one time, which are covered by EN 795:2012;anchor devices used in any sports or recreational activity; equipment designed to conform to EN 516 or EN 517;elements or parts of structures which were installed for use other than as anchor points or anchor devices, e.g. beams, girders;structural anchors.

Personal fall protection equipment - Anchor devices - Recommendations for anchor devices for use by more than one person simultaneously

ANSI/ASSE Z359.4-2013 协助营救和自救系统,子系统和部件用安全性要求

Safety Requirements for Assisted-Rescue and Self-Rescue Systems, Subsystems and Components

ANSI/ASSE Z359.13-2013 个人能量吸收器和能量吸收绳索

Personal Energy Absorbers and Energy Absorbing Lanyards

DIN EN 795:2012 个人防跌落设备. 锚固装置; 德文版本EN 795-2012

Personal fall protection equipment - Anchor devices; German version EN 795:2012

DS/EN 795:2012 个人坠落保护设备 锚固装置

This European Standard specifies requirements for performance and associated test methods for single-user anchor devices which are intended to be removable from the structure. These anchor devices incorporate stationary or travelling (mobile) anchor point

Personal fall protection equipment - Anchor devices

BS EN 795:2012 防止从高处跌落设备.锚固装置

Personal fall protection equipment. Anchor devices

CSA Z259.2.4-2012 防坠器和垂直刚性导轨

Scope 1.1 This Standard specifies design, testing, and marking requirements for manufactured fall arresters and fixed vertical rigid rails that are used on a vertical or slope plane. "Vertical plane" means an angle of not more than 15° from the vertical, which prevents the worker from leaning back. 1.2 The equipment specified in this Standard is intended for use where there is a danger of falling from heights. In the event of fall, the fall arrester will lock on the fixed vertical rigid rail to arrest the fall. 1.3 This Standard does not cover work positioning and horizontal travel systems. 1.4 In CSA standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; and "may" is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application. 1.5 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only.

Fall arresters and vertical rigid rails

BS ISO 22846-1:2012 个人防跌落保护性设备.绳索接近系统.工作系统的基本原理

Personal equipment for protection against falls. Rope access systems. Fundamental principles for a system of work