13.340.60 标准查询与下载

EN 363:2008 个人防跌落设备.个人防跌落系统

This European Standard specifies the general characteristics and assembly of personal fall protection systems. It gives examples forThe specific types of personal fall protection systems and describes how components may be assembled into systems.

Personal fall protection equipment - Personal fall protection systems

LST EN 1497-2007 个人坠落保护装备 救援背带

Personal fall protection equipment - Rescue harnesses

DS/EN 1497:2007 个人坠落保护装备 救援背带

This European Standard specifies requirements, test methods, marking and information supplied by the manufacturer for rescue harnesses. Rescue harnesses conforming to this European Standard are used as components of rescue systems, which are personal fall protection systems.Rescue harnesses are not intended to be used as body holding devices in fall arrest systems.

Personal fall protection equipment - Rescue harnesses

DS/EN 1263-1:2007 安全网 第1部分：安全要求、测试方法

This european Standard is applicable to safety nets and their accessories for use in construction and assembly work and specifies safety requirements and test methods. This standard is not applicable to the installation of safety nets.

Safety nets - Part 1: Safety requirements, test methods

DIN EN 1497:2007 个人防跌落设备.营救带状装置

This European Standard specifies requirements, test methods, marking and information supplied by the manufacturer for rescue harnesses. Rescue harnesses conforming to this European Standard are used as components of rescue systems, which are personal fall protection systems. Rescue harnesses are not intended to be used as body holding devices in fall arrest systems.

Personal fall protection equipment - Rescue harnesses; German version EN 1497:2007

BS EN 1497:2007 个人防坠落设备.营救带状装置

This European Standard specifies requirements, test methods, marking and information supplied by the manufacturer for rescue harnesses. Rescue harnesses conforming to this European Standard are used as components of rescue systems, which are personal fall protection systems. Rescue harnesses are not intended to be used as body holding devices in fall arrest systems.

Personal fall protection equipment - Rescue harnesses

EN 1497:2007 救生设备.救生带

This European Standard specifies requirements, test methods, marking and information supplied byThe manufacturer for rescue harnesses. Rescue harnesses conforming toThis European Standard are used as components of rescue systems, which are personal fall protection systems. Rescue harnesses are not intended to be used as body holding devices in fall arrest systems.

Personal fall protection equipment - Rescue harnesses

ANSI Z359.0-2007 坠落保护和防坠落的定义和术语

This standard establishes the definitions and nomenclature used for fall arrest and fall protection.

Definitions and Nomenclature Used for Fall Protection and Fall Arrest

ANSI Z359.4-2007 援救和自救系统、子系统和元部件的安全要求

This standard establishes requirements for the performance, design, marking, qualification, instruction, training, use, maintenance and removal from service of connectors, harnesses, lanyards, anchorage connectors, winches / hoists, descent control devic

Safety Requirements for Assisted-Rescue and Self-Rescue Systems, Subsystems and Components

ISO 22159:2007 个人防跌落保护性设备.降落装置

This International Standard specifies requirements, test methods, marking and information to be supplied by the manufacturer for descending devices. It also specifies some basic requirements for the descent lines to be used with the descending devices. This International Standard is applicable to automatic and manually operated descending devices intended for use in the workplace in access, egress, work positioning and rescue systems. Various types and classes of descending devices are defined according to function and performance. These descending devices can be used in situations other than the workplace if adequate training and/or supervision are provided. This International Standard is not intended to apply to descending devices used in leisure activities such as recreational climbing and caving, although its requirements can be useful in specifying such equipment. NOTE Descending devices conforming to this International Standard can be designed for use by one or two persons simultaneously.

Personal equipment for protection against falls - Descending devices

DIN EN 365 Corrigendum 1:2007 预防高空坠落的个人保护设备.使用、维护、定期检验、修理、作标记和包装用说明书的一般要求.DIN EN 365-2004英文版的技术勘误1

Personal protective equipment against falls from a height-General requirements for instructions for use,maintenance,periodic examination,repair,marking and packaging Corrigendum 1 to English version of DIN EN 365:2004

DIN EN 365 Berichtigung 1:2007 防人员从高处坠落的保护装置.使用说明、维修、周期检验、修理、标记和包装的一般要求

This document specifies the minimum general requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging of PPE, which includes body holding devices, and other equipment used in conjunction with a body holding device, to prevent falls, for access, egress and work positioning, to arrest falls and for rescue.

Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging; German version EN 365:2004, Corrigenda to DIN EN 365:2004-12; German version EN 36

DS/EN 365/AC:2007 防止高处坠落的个人防护设备 使用、维护、定期检查、修理、标记和包装说明的一般要求

This European Standard specifies the minimum general requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging of PPE, which includes body holding devices, and other equipment used in conjunction with a body holding device, to prevent falls, for access, egress and work positioning, to arrest falls and for rescue. This European Standard is not intended to cover: 1) specific requirements that are only relevant to the particular PPE or other equipment for protection against falls from a height and its use, which should be specified in the relevant European Standard; 2) PPE or other equipment for protection against

Personal protective equipment against falls from a height - General requirements for instructions for use, maintenance, periodic examination, repair, marking and packaging

DS/EN 12841:2007 个人坠落保护设备 绳索接入系统 绳索调节装置

This European Standard applies to rope adjustment devices intended for use in rope access systems. It specifies the requirements, test methods, marking and information supplied by the manufacturer. Rope adjustment devices conforming to this European Standard may be designed for the use of one person, or in case of rescue, for two persons simultaneously. The rope adjustment devices as specified are not suitable for use in a fall arrest system.

Personal fall protection equipment - Rope access systems - Rope adjustment devices

DS/EN 1498:2007 个人坠落保护设备 救援环

This European Standard specifies requirements, test methods, marking and information supplied by the manufacturer for rescue loops. Rescue loops conforming to this European Standard are used as components of rescue systems.

Personal fall protection equipment - Rescue loops

DS/EN 1496:2007 个人坠落保护设备 救援起重设备

This European Standard specifies requirements, test methods, marking and information supplied by the manufacturer for rescue lifting devices. Rescue lifting devices conforming to this European Standard are used as components or sub-systems of rescue systems.NOTE Rescue lifting devices in accordance with this European Standard may be combined with other components or sub-systems, e.g. descender devices for rescue (EN 341), retractable type fall arresters (EN 360).

Personal fall protection equipment - Rescue lifting devices

DIN EN 1498:2007 个人防坠落设备.救生圈

This European Standard specifies requirements, test methods, marking and information supplied by the manufacturer for rescue loops. Rescue loops conforming to this European Standard are used as components of rescue systems.

Personal fall protection equipment - Rescue loops; English version of DIN EN 1498:2007-01

ASTM F2684/F2684M-07(2017) 便携式高锚具用标准试验方法

4.1 Static Load Test—This test verifies that the portable high anchor device can support the design load without permanent deformation and continue to function in a safe manner. 4.2 Load Test for Failure—This test determines the force at which the portable high anchor device fails. 1.1 This test method applies to portable high anchor devices that may be used by rescue personnel during both training exercises and actual rescue operations. 1.2 This test method covers two mechanical tests, the Static Load Test and the Load Test for Failure. 1.3 Tests contained herein are destructive in nature. Portable high anchor devices subjected to any of these tests shall not be used in any way after testing except in evaluating the results of such testing. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.5 This specification does not imply approval of any method of use of portable high anchor devices. In addition, the tests described are laboratory tests and do not duplicate field conditions. Furthermore, the test load values contained herein are not to be interpreted as the forces which a portable high anchor device may be subjected to, or may be expected to sustain, in actual field use. 1.6 See Section 6 on Hazards for safety warning. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Portable High Anchor Devices

ANSI/ASSE Z359.3-2007 定位和经过限制系统的安全性要求

This standard establishes requirements for the performance, design, marking, qualification, test methods, and instructions of lanyards and harnesses comprising personal positioning and travel restraint systems.

Safety Requirements for Positioning and Travel Restraint Systems

ANSI/ASSE Z359.1-2007 个人用防坠落系统,子系统和组件的安全性要求

This standard establishes requirements for the performance, design, marking, qualification, instruction, training, inspection, use, maintenance and removal from service of connectors, full body harnesses, lanyards, energy absorbers, anchorage connectors, fall arresters, vertical lifelines, and self-retracting lanyards comprising personal fall arrest systems for users within the capacity range of 130 to 310 pounds (59 to 140 kg).

Safety Requirements for Personal Fall Arrest Systems, Subsystems, and Components