13.340.60 标准查询与下载

BS EN 813:2024 个人坠落防护装备 坐式安全带

Personal fall protection equipment — Sit harnesses

24/30452842 DC BS 8681 个人坠落防护设备 锚固系统 提供商能力 规格

BS 8681. Personal fall protection equipment. Anchor systems. Provider competence. Specification

22/30457237 DC BS EN 795 个人坠落防护设备 锚固装置

BS EN 795. Personal fall protection equipment. Anchor devices

BS 8437:2022 工作场所使用的个人坠落防护系统和设备的选择、使用和维护操作规范

What is BS 8437 - Personal fall protection systems and equipment about? Accidents from height are one of the major causes of fatalities in the workplace. BS 8437 gives guidance on best practice in choosing, operating, and maintaining various personal fall protection systems and equipment. Who is BS 8437 - Personal fall protection systems and equipment for? BS 8437 on personal fall protection systems and equipment can be adopted by: Employers, employees and self-employed persons who use personal fall protection systems and equipment Designers e.g. architects and structural engineers, including those responsible for the design of safe access routes on buildings and structures Those who commission work at height e.g. building owners and contractors Those involved in training persons for work at height What does BS 8437 - Personal fall protection systems and equipment cover? BS 8437 gives recommendations and guidance on the selection, use and maintenance of personal fall protection systems and equipment for use in the workplace to prevent and/or to arrest falls from a height, including systems and equipment suitable for use in rescue. It also gives...

Code of practice for selection, use and maintenance of personal fall protection systems and equipment for use in the workplace

BS 7883:2019 个人坠落防护设备 锚固系统 系统设计、安装和检验 实践守则

What is  BS 7883 -  Personal fall protection equipment  about? Personal fall protection equipment is designed to ensure that people working at height are adequately protected, and anchor systems are a critical component of PFPE.  BS 7883 on personal fall protection equipment gives recommendations for new anchor system design, installation, use, maintenance and inspection. Who is  BS 7883 -    Personal fall protection equipment  for? BS 7883   on personal fall protection equipment can be adopted by: System designers Installers Manufacturers Inspectors and users of anchor devices and anchor systems Other interested parties, e.g. architects and structural engineers Those responsible for the design of safe access and egress on buildings and structures Examining bodies covering the installation, testing, commissioning and examining in service of anchor devices according to BS EN 795 Why should you use  BS 7883 -    Personal fall protection equipment ? BS 7883 on personal fall protection equipment  gives recommendations for the system design, installation, use, maintenance and inspection of new anchor systems, incorporating anchor devices conforming to BS EN 795 ,

Personal fall protection equipment. Anchor systems. System design, installation and inspection. Code of practice

BS EN 363:2018 个人坠落防护设备 个人坠落保护系统

What is BS EN 363- Personal fall protection systems about?    BS EN 363 is a European standard on personal fall protective equipment that discusses personal fall protection systems to ensure the protection of the user against falls from a height.   BS EN 363 specifies the general characteristics and assembly of personal fall protection systems. BS EN 363 gives examples for the specific types of personal fall protection systems and describes how components may be assembled into systems.   Who is BS EN 363- Personal fall protection systems for?

Personal fall protection equipment. Personal fall protection systems

DIN 14927:2018 带双刺扣环和带多功能孔岩钉钢环的消防员定位用带. 要求、试验和标记

The document contains requirements, dimensions, design and testing of belts for positioning for firefighter. The firefighter positioning belt enables firefighters to protect themselves against the danger of falling by holding or holding back with the connection means (safety rope). The standard applies together with DIN EN 358 for fire brigade positioning belts (FH) type A and type B with 2-thorn-buckle and specifies their sizes, requirements and tests taking into account fire brigade specific emergency characteristics.

Belt for positioning for firemen with 2-thorn-buckle and karabiner with multifunctional eye - Requirements, testing, marking

18/30372130 DC BS EN 17235 永久锚固装置和安全钩

BS EN 17235. Permanent anchor devices and safety hooks

BS EN 353-1:2014+A1:2017 个人坠落防护设备 包括锚索的导向型防坠器 包括刚性锚索的导向型防坠器

What is BS EN 353-1+A1- Guided type fall arresters including a rigid anchor line about?    BS EN 353-1+A1 discusses p ersonal fall protection equipment. BS EN 353-1+A1 is a European standard that provided requirements and test methods for g uided type fall arresters including a rigid anchor line to ensure fall protection.   BS EN 353-1+A1 is the first part of a multi-part series that specifies the requirements, test methods, marking, the information supplied by the manufacturer, and packaging for guided type fall arresters including a rigid anchor line. This anchor line is usually attached to or integrated into ladders or rungs adequately fixed to suitable structures.   Guided type fall arresters including a rigid anchor line conforming to BS EN 353-1+A1 are components of one of the fall arrest systems covered by EN 363.   BS EN 353-1+A1 applies to rigid anchor line...

Personal fall protection equipment. Guided type fall arresters including an anchor line - Guided type fall arresters including a rigid anchor line

BS 8610:2017 个人坠落防护设备 锚固系统 规格

What is BS 8610- Specifications for anchor systems for personal fall protection about? BS 8610 discusses personal fall protection equipment. BS 8610 is a standard that provides specifications for anchor systems for personal fall protection of the wearer against falls. BS 8610 provides requirements and test methods for type testing anchor systems that are installed and tested in the base materials specified by the manufacturer for restraint systems, fall arrest systems, rope access systems, work positioning systems, rescue systems, and evacuation systems. BS 8610 covers anchor systems intended for one or more users simultaneously and specifies the maximum number of users for each type of anchor system. Note1: BS 8610 does not apply to: Equipment conforming to BS EN 516 or BS EN 517 Type A load-limiting anchor systems for rope access and work positioning, rescue – accompanied descent, rescue – remotely operated – redirect attachment and evacuation Type C non-load-limiting and load-limiting anchor systems for rope access and work positioning, rescue – accompanied descent, rescue – remotely operated – redirect attachment and evacuation Type B and type E as they are not installed in a base material

Personal fall protection equipment. Anchor systems. Specification

CSA Z259.2.5-17:2017 防坠器和垂直救生索

1.1 This Standard specifies design, testing, and marking requirements for manufactured fall arresters for single users and for manufactured vertical lifelines. 1.2 The equipment specified in this Standard is intended for use where there is a danger of falling from heights. In the event of a fall, the equipment will lock to arrest the fall. 1.3 This Standard does not cover a) the design, testing, installation, or supply of anchorage connectors; b) horizontal lifeline systems; c) rope adjusting implements for use in travel restraint or work positioning applications; and d) any system incorporating a knot, hitch, or rope sliding hitch. 1.4 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the Standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. 1.5 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only.

Fall arresters and vertical lifelines

BS EN 1496:2017 个人坠落防护设备 救援起重装置

Personal fall protection equipment. Rescue lifting devices

CSA Z259.13-16:2017 由水平救生索制成的系统

1.1 Cette norme prescrit les exigences relatives à la performance, à la conception, à la mise à l’essai, à l’étiquetage et à la fourniture des instructions pour les systèmes de corde d’assurance horizontale (CAH) monoportée (voir la figure 1). Ces systèmes de CAH sont un élément d’un système d’arrêt de chute complet. 1.2 Cette norme ne vise pas : a) les systèmes de CAH : i) dont la portée est supérieure à 18,3 m (60 pi) ; ii) ayant plus d’une portée (voir l’annexe A) ; iii) qui supportent plus de deux travailleurs ; iv) qui sont conçus spécialement pour des utilisations limitées ou propres à un site conformément à la CSA Z259.16 ; v) ayant une flèche supérieure à 5° par rapport à l’horizontale ; vi) sans absorbeur d’énergie de corde d’assurance horizontale (AÉCAH) ; vii) utilisés pour limiter le déplacement ; viii) utilisés pour le positionnement ; ou ix) qui incorporent un AÉCAH qui se déploie à plus de 80 %, lorsque mis à l’essai conformément à l’article 8.3.2.2 ; b) les systèmes de garde-corps ou ligne d’avertissement faits en matériaux flexibles comme les câbles, les chaînes ou les cordes ; ou c) les systèmes d’assurance rigides horizontaux, comme les rails rigides ou les systèmes montés sur une poutre. 1.3 Cette norme ne vise pas la conception des ancrages pour les systèmes de CAH traités dans la CSA Z259.16. 1.4 Cette norme ne traite pas de l’équipement de protection contre les chutes fixé au système de CAH. 1.5 Dans cette norme, le terme «doit» indique une exigence, c’est-à-dire une prescription que l’utilisateur doit respecter pour assurer la conformité à la norme ; «devrait» indique une recommandation ou ce qu’il est conseillé mais non obligatoire de faire ; et «peut» indique une possibilité ou ce qu’il est permis de faire. Les notes qui accompagnent les articles ne comprennent pas de prescriptions ni de recommandations. Elles servent à séparer du texte les explications ou les renseignements qui ne font pas proprement partie de la norme. Les notes au bas des figures et des tableaux font partie de ceux-ci et peuvent être rédigées comme des prescriptions. Les annexes sont qualifiées de normatives (obligatoires) ou d’informatives (facultatives) pour en préciser l’application. 1.6 Les valeurs indiquées en unités SI sont les valeurs officielles dans cette norme. Les valeurs entre parenthèses sont données à titre d’information et pour fin de comparaison seulement.

Systems made of horizontal lifeline

GSO ISO 14567:2015 防止高空坠落的个人防护装备 单点约束装置

  Scope is not provided for this standard

Personal protective equipment for protection against falls from a height -- Single-point anchor devices

GSO ISO 16024:2015 防止高空坠落的个人防护装备 柔性安全绳系统

  Scope is not provided for this standard

Personal protective equipment for protection against falls from a height -- Flexible horizontal lifeline systems

DIN 14927:2015 带双刺扣环和带多功能孔岩钉钢环的消防员定位用带.要求、试验和标记

Belt for positioning for firemen with 2-thorn-buckle and karabiner with multifunctional eye - Requirements, testing, marking

DIN EN 1263-2:2015 临时工程设备 安全网 第2部分：定位限制的安全要求；德文版 EN 1263-2:2014

Temporary works equipment - Safety nets - Part 2: Safety requirements for the positioning limits; German version EN 1263-2:2014

DIN EN 1263-1:2015 临时工程设备 安全网 第1部分：安全要求、测试方法；德文版 EN 1263-1:2014

Temporary works equipment - Safety nets - Part 1: Safety requirements, test methods; German version EN 1263-1:2014

LST EN 353-1-2015 个人防跌落设备. 设有铰链的导向跌落保护装置. 第1部分: 设有刚性铰链的导向跌落保护装置

Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line

BS EN 1263-1:2014 临时工程设备. 安全网. 安全要求和试验方法

Temporary works equipment. Safety nets. Safety requirements, test methods