17.040.10 极限和配合 标准查询与下载

KS B ISO 2768-2:2014 一般公差.第2部分:未注公差的几何公差

General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications

KS B ISO 286-1:2014 产品几何技术规范(GPS).线性尺寸公差的ISO规范体系.第1部分:基本公差、偏差和定值

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits

KS B 0401-2014(2019) 系统的限制和拟合

System of Limits and Fits

KS B 0401-2014 尺寸公差及联结

System of Limits and Fits

KS B ISO 1829:2013 一般用途公差带的选择

Selection of tolerance zones for general purposes

DS/CEN ISO/TS 8062-2:2013 几何产品规范（GPS） 模制零件的尺寸和几何公差 第2部分：规则

ISO 8062-2:2009 gives the rules for geometrical dimensioning and tolerancing of final moulded parts and parts machined out of moulded parts. It also gives rules and conventions for the indications of these requirements in technical product documentation a

Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules

DS/EN ISO 286-1/AC:2013 几何产品规范（GPS） 线性尺寸公差的 ISO 代码系统 第1部分：公差、偏差和配合的基础

This part of ISO 286 establishes the ISO code-system for tolerances to be used for linear sizes for features of size of type:a) cylinderb) two parallel planes.

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits

DS/EN ISO 286-2/AC:2013 几何产品规范（GPS） 线性尺寸公差的 ISO 代码系统 第2部分：孔和轴的标准公差等级和极限偏差表

This part of ISO 286 gives values of the limit deviations for commonly used tolerance classes for holes and shafts calculated from the tables given in ISO 286-1. This part of ISO 286 covers values for the upper limit deviations ES (for holes) and es (for

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts

EN ISO/TS 8062-2:2013 产品几何技术规范(GPS).模压部件的空间和几何公差.第2部分:规则

Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules

DS/EN ISO 286-1:2013 几何产品规范（GPS） 线性尺寸公差的 ISO 代码系统 第1部分：公差、偏差和配合的基础

This part of ISO 286 establishes the ISO code-system for tolerances to be used for linear sizes for features of size of type cylinder and type two parallel planes.

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits

KS B ISO 16570:2013 几何产品规格（GPS） 线性和角度尺寸标注和公差：+/ 极限规格 步长尺寸、距离、角度尺寸和半径

Geometrical Product Specifications(GPS)-Linear and angular dimensioning and tolerancing:+/-limit specifications-Step dimensions, distances, angular sizes and radii

GSO ISO 14405-2:2013 产品几何形状技术规范（GPS）尺寸公差 第2部分：线性尺寸以外的尺寸

This part of ISO 14405 illustrates the use of geometrical tolerancing for dimensions that are not linear sizes to avoid the ambiguity that the use of ± tolerances on these dimensions causes. Both linear and angular dimensions, except size of features of size are covered. Dimensional tolerancing can be indicated by ± tolerancing or geometrical tolerancing. The ambiguity caused by using ± tolerances for dimensions other than linear sizes (for individual tolerances and general tolerances according to, e.g. ISO 2768-1 and ISO 8062-3) is explained in Annex A. NOTE 1 The figures, as shown in this part of ISO 14405, merely illustrate the text and are not intended to reflect actual usage. The figures are consequently simplified to indicate only the relevant principles. NOTE 2 For indications of size tolerances, see the following: — ISO 14405-1 for linear size; — ISO 2538 for wedges; — ISO 3040 for cones. NOTE 3 The rules for geometrical tolerancing are given in ISO 1101.

Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear sizes

LST EN ISO 14405-2:2012 产品几何规格（GPS） 尺寸公差 第2部分：线性尺寸以外的尺寸（ISO 14405-2:2011）

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)

DS/EN ISO 14405-2:2011 产品几何规格（GPS） 尺寸公差 第2部分：线性尺寸以外的尺寸

This part of ISO 14405 illustrates the use of geometrical tolerancing for dimensions that are not linear sizes to avoid the ambiguity that the use of +/- tolerances on these dimensions causes.

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes

LST EN ISO 14405-1:2011 产品几何规格（GPS） 尺寸公差 第1部分：线性尺寸（ISO 14405-1:2010）

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010)

DS/EN ISO 14405-1:2011 几何产品规范（GPS） 尺寸公差 第1部分：线性尺寸

This part of ISO 14405 establishes the default specification operator for linear size and defines a number of special specification operators for linear size for feature of size types “cylinder” and “two parallel opposite planes”. It also defines the specification modifiers and the drawing indications for these linear sizes.

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes

EN ISO 14405-2:2011 产品几何量技术规范(GPS).尺寸公差.第2部分:除了线性尺寸之外的尺寸

This part of ISO 14405 illustrates the use of geometrical tolerancing for dimensions that are not linear sizes toavoid the ambiguity that the use of ？ tolerances on these dimensions causes. Both linear and angulardimensions, except size of features of size are covered.

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes

ISO 14405-1:2010 几何产品规范(GPS).尺寸公差.第1部分:线性尺寸

This part of ISO 14405 establishes the default specification operator for linear size and defines a number of special specification operators for linear size for feature of size types “cylinder” and “two parallel opposite planes”. It also defines the specification modifiers and the drawing indications for these linear sizes. This part of ISO 14405 covers the following linear sizes: local size; two-point size; spherical size; section size; portion size; global size; direct global linear size; least-squares size; maximum inscribed size; minimum circumscribed size; indirect global linear size; calculated size; circumference diameter; area diameter; volume diameter; rank-order size; maximum size; minimum size; average size; median size; mid-range size; range size. This part of ISO 14405 defines tolerances of linear sizes when there is: a + and/or ? limit deviation (e.g. 0/?0,019) (see Figure 9); an upper limit of size (ULS) and/or lower limit of size (LLS) (e.g. 15,2 max., 12 min. or 30,2/30,181) (see Figure 11); an ISO tolerance class code in accordance with ISO 286-1 (e.g. 10 h6) (see Figure 10) with or without modifiers (see Tables 1 and 2). This part of ISO 14405 provides a set of tools to express several types of size characteristic. It does not present any information on the relationship between a function or a use and a size characteristic.

Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes

LST EN ISO 286-2:2010 几何产品规范（GPS） 线性尺寸公差的 ISO 代码系统 第2部分：孔和轴的标准公差等级和极限偏差表（ISO 286-2:2010）

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

LST EN ISO 286-1:2010 几何产品规范（GPS） 线性尺寸公差的 ISO 代码系统 第1部分：公差、偏差和配合的基础（ISO 286-1:2010）

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010)