共找到 144 条与 时间、速度、加速度、角速度的测量 相关的标准,共 10 页
Configuration Management (CM) and Data Acquisition Management @M), as stili somewhat young disciplines, have only recently begun to receive support by extensive literature reference. Although recently text material became available, the majority of refe
Configuration and Data Management References
Prezentul Standard Interna?ional specifica condi?iile In care trebuie efectuate verific?rile depunerilor radioluminescente pentru instrumente orare. Acest standard completeaz? ISO 3157 ?i, in special, cap.5 al acestui standard, ?Specifi
Time measurement instruments-Conditions for carrying out checks on radioluminescent deposits
Testing method of patable speed measuring instrument
本标准规定了压电式加速度传感器的基本参数、技术条件、试验方法、检验规则、标志、包装、贮存条件。 本标准适用于以具有压电效应的材料为换能元件的振动、冲击传感器的设计、制造、使用和维修。 本标准不适用于内装电路和其它具有特殊要求的压电式加速度传感器。
Piezoelectric type acceleration transducer
本标准规定了电阻应变式加速度传感器的基本参数技术要求、试验方法、检验规则与标志、包装、运输、贮存等方面的要求。 本标准适用于以电阻应变计为敏感元件测量物体加速度的传感器的设计、制造、使用与修理。
Resistance strain accelerator transducer
Revolts counters and units counters. Specifications. Testing methods
The purpose of the Statement of Work is to define the Configuration Management requirements necessary to maintain and control CALS databases and provide transmission, access and receipt of digital data between contractors, subcontractors, vendors and t
CALS Configuration Management SOW and CDRL Guidance
The traditional approach to measuring levels of nonconformance using attribute data, whether the results are stated in percent or Parts Per Million (PPM) , becomes more burdensome as the nonconformance levels approach zero.
Assessment of Quality Levels in PPM Using Variables Test Data
Revolts counters and units counters. Specifications. Testing methods
本标准规定了加速度计较准仪的基本参数、技术要求、试验方法、检验规则及标志、包装、贮存等。 本标准适用于校准仪的设计、制造、修理与使用。
Accelerator calibration instrument - Specification
本标准规定了接触式数字转速表的产品分类、技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于短期测量转速用的转速表。
Contact handy digital tachometer
Conventional attribute sampling plans based upon acceptance numbers that permit acceptance of a lot when some allowable number of nonconformances are encountered during inspection are no longer desirable. In addition, emphasis is now placed on the quality level that is received by the customer. This relates directly to the Lot Tolerance Percent Defective (LTPD) value or the Limiting Quality Protection of MIL-STD-105. Measuring quality levels in percent nonconforming, although not incorrect, has been replaced with quality levels measured in parts per million (PPM). As a result, this standard addresses the need for sampling plans that can augment MIL-STD-105, are based upon a zero acceptance number, and address quality (nonconformance) levels in the parts per million range. This document does not address minor nonconformances, which are defined as nonconformances that are not likely to reduce materially the usability of the unit of product for its intended purpose.
Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots
Conventional attribute sampling plans based upon nonzero acceptance numbers are no longer desirable.In addition, emphasis is now placed on the quality level that is received by the customer. This relates directly to the Lot Tolerance Percent Defective (LTPD) value or the Limiting Quality Protection of MTLSTD-105. Measuring quality levels in percent nonconforming, although not incorrect, has been replaced with quality levels measured in parts per million (PPM). As a result, this standard addresses the need for sampling plans that can augment MIGSTD-105, are based upon a zero acceptance number, and address quality (nonconformance) levels in the parts per million range. This document does not address minor nonconformances, which are defined as nonconformances that are not likely to reduce materially the usability of the unit of product for its intended purpose.
Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of a Continuous Manufacturing Process
In today's high technology environment, a variety of management tools have been developed within government and industry to govern the fast changing technical environment. There is a particular demand in industry for formal education in the disciplines
Education in Configuration and Data Management
The overall objective of configuration management is to guarantee the buyer that a given product is what it was intended to be, functionally and physically, as defined by contractual drawings and specifications, and to identify the configuration to the
Configuration Control
The overall business, engineering, and manufacturing environment is moving from manual to automated systems. The design/manufacturing loop (coding/testing for software) is being integrated into a single entity and can become "paperless." CAD, CAM, CAE,
Guideline for Transitioning Configuration Management to an Automated Environment
1.0.1 Overview of Confiaurat.on Manaaement. To manage the development and procurement of modern-day hardware and software systems, the project management concept and many engineering, logistic, and management disciplines have developed over the years.
Configuration Identification
Electronic time-of-use registers for electricity meters
Electronic time-of-use registers for electricity meters
This standard specifies definitions, tests and data sheet details, which apply, in particular, to measuring instruments for measuring time-reference quantities.
Measurement and control; digital measuring instruments; instruments for measuring time reference quantities; definitions, tests and data sheet details
Configuration and Data Management Training Course
Configuration and Data Management Training Course
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号