17.180.01 光学和光学测量综合 标准查询与下载

T/CASMES 278-2023 钙钛矿光伏组件功率衰减检测技术要求

本文件规定了钙钛矿光伏组件功率衰减检测的技术要求、检测方法、包装和运输要求、检验规则以及结果差异处理。

Technical requirements for power attenuation testing of perovskite photovoltaic modules

DB3204/T 1056-2023 建筑室外光污染限值及检测方法

Building outdoor light pollution limits and detection methods

T/QGCML 1706-2023 便于束线整理的滤光片分光器

本文件规定了装置便于束线整理的滤光片分光器的术语和定义、结构及原理、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于便于束线整理的滤光片分光器的生产及检验。

Filter beam splitter for easy beamline organization

T/WHHLW 20-2023 后置式运动用瞄准镜

本文件适用于运动用后置式瞄准镜技术的设计、制造和使用，旨在确保该类产品的安全性、可靠性和性能。 本文件适用于后置式运动用瞄准镜的生产以及质量控制。

Rear-mounted sports sight

ISO/DIS 7944:2023 光学和光学仪器 - 参考波长

Optics and optical instruments — Reference wavelengths

DB61/T 1715-2023 资源规划测量技术规范

本文件规定了陕西省资源和规划领域控制测量、用地测量及不动产权籍调查、建设工程定线验线测量、管线定线验线测量、规划监督测量、规划竣工测量、规划三维报建、房产测绘和质量检查与验收的内容与方法。本文件适用于各市域范围内与资源规划有关的测绘工作。

Resource Planning Measurement Technical Specifications

ISO/CD 9335:2023 光学和光子学 光传递函数 测量原理和程序

Optics and photonics — Optical transfer function — Principles and procedures of measurement

ISO/CD 11421:2023 光学和光子学 — 光学传递函数 (OTF) 测量的准确性

Optics and photonics — Accuracy of optical transfer function (OTF) measurement

T/GDAQI 111-2023 医用电子内窥镜景深的评估方法

本文件规定了医用电子内窥镜的相关术语和定义、产品组成、试验装置、试验环境、试验步骤、试验结果、试验报告。 本文件适用于医用电子内窥镜景深的快速评估，例如电子上消化道内窥镜、电子十二指肠内窥镜、电子上消化道内窥镜、电子下消化道内窥镜、纤维上消化道内窥镜。 本文件不适用于医用硬性内窥镜的景深评估。

Evaluation method for depth of field of medical electronic endoscope

ASTM E2007-10(2023) 计算机放射线摄影标准指南

Standard Guide for Computed Radiography

T/CIE 173-2023 红外光全反射式雨量光照传感器

本文件规定了红外光全反射式雨量光照传感器的术语和定义、组成与分类、基本参数、要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于通用红外光全反射式雨量光照传感器设计、开发和使用，可为厂商和用户提供技术标准参考。

Infrared light total reflection rain and light sensor

T/CEEIA 679-2023 中小学校及幼儿园教室智慧健康照明设计规范

本文件规定了中小学校及幼儿园教室智慧健康照明的术语定义、一般要求、光学技术要求和光环境测试方法，描述了视网膜蓝光危害、波动深度、教师眼部垂直照度和生理等效照度或视黑素等效勒克斯的现场测试方法。 本文件适用于中小学校及幼儿园教室照明的新建、改建、扩建的设计，其他类似的教学场所参照使用。

Specification for intelligent and healthy lighting design in primary and middle schools and kindergartens

DB61/T 1689-2023 教室照明质量检测技术规范

本文件规定了教室照明质量检测一般要求、检测条件、检测方法和检测结果的要求。本文件适用于高等院校、中小学、幼儿园及校外培训机构教学教室照明的质量检测。

Technical Specifications for Classroom Lighting Quality Inspection

ASTM F1316-18(2023) 测量透明部件透射率的标准试验方法

1.1 This test method describes an apparatus and procedure that is suitable for measuring the transmissivity of large, thick, or curved transparent parts including parts already installed. This test method is limited to transparencies that are relatively neutral with respect to wavelength (not highly colored). 1.2 Since the transmissivity (transmission coefficient) is a ratio of two luminance values, it has no units. The units of luminance recorded in the intermediate steps of this test method are not critical; any recognized units of luminance (for example, foot-lamberts or candelas per square metre) are acceptable for use, as long as use is consistent. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring the Transmissivity of Transparent Parts

KS B ISO 15529-2023 光学和光子学.光学传递函数.采样成像系统的调制传递函数（MTF）的测量原理

Optics and photonics — Optical transfer function — Principles of measurement of modulation transfer function(MTF) of sampled imaging systems

T/SATA 059-2023 太赫兹光谱数据库数据格式规范

本文件规定了光谱数据库数据描述规范和数据格式规范。 本文件适用于各种标准品或经过处理的样品获取太赫兹光谱，建立光谱数据库。

Data format specification of terahertz spectroscopy database

BS ISO/CIE 23539:2023 光度测定 CIE物理光度测定系统

1   Scope This document specifies the characteristics of the system of physical photometry established by the CIE and accepted as the basis for the measurement of light. It defines the photometric quantities, units and standards that make up the CIE system of physical photometry and that have been officially accepted by the Comité International des Poids et Mesures (CIPM). This comprises: — the definition of photometric quantities, symbols and units; — the definition of CIE spectral luminous efficiency functions for photopic vision, scotopic vision, mesopic vision and 10° photopic vision ; — the definition of CIE photometric observers that conforms to these functions; — the definition of maximum luminous efficacy for photopic vision, mesopic vision, scotopic vision and 10° photopic vision .

Photometry. The CIE system of physical photometry

KS B ISO 9335-2023 光学和光子学.光学传递函数.测量原理和程序

Optics and photonics — Optical transfer function — Principles and procedures of measurement

KS B ISO 9334-2023 光学和光子学.光学传递函数.定义和数学关系

Optics and photonics — Optical transfer function — Definitions and mathematical relationships

ISO/CIE 23539:2023 光度测定法.物理光度测定的CIE系统

Photometry — The CIE system of physical photometry