19.060 机械试验 标准查询与下载

GOST R 56812-2015 高分子复合材料. 组合加载压缩中力学特性的测定方法

Polymer composites. Method for determination of mechanical characteristics in combined loading compression

ASTM D6635-15 平板式膨胀计使用的标准试验方法

5.1 Soundings performed using this test method provide a detailed record of dilatometer results, which are useful for evaluation of site stratigraphy, homogeneity, depth to firm layers, voids or cavities, and other discontinuities. The penetration resistance, if obtained, and subsequent membrane expansion are used for soil classification and correlation with the engineering properties of soils. 5.2 The DMT may provide measurements of penetration resistance, lateral stress, deformation modulus, and pore-water pressure (in sands). However, the in-situ soil properties are affected by the penetration of the blade. Therefore, published correlations are used to estimate soil properties for the design and construction of earthworks and foundations for structures, and to predict the behavior of soils subjected to static or dynamic loads. 5.3 This test method tests the soil in-situ and soil samples are not obtained. However, the interpretation of the results from this test method does provide an estimate of the types of soil penetrated. Soil samples from parallel borings may be obtained for correlation purposes, but prior information or experience may preclude the need for borings. Note 2: The quality of the result produced by this test method is dependent on the competence of the personnel performing it, and the suitability of the equipment and facilities used. Agencies that meet the criteria of Practice D3740 are generally considered capable of competent and objective testing/sampling/ inspection/etc. Users of this test method are cautioned that compliance with Practice D3740 does not in itself assure reliable results. Reliable results depend on many factors; Practice D3740 provides a means of evaluating some of those factors. 1.1 This test method describes an in-situ penetration plus expansion test. The test is initiated by forcing the steel, flat plate, dilatometer blade2, with its sharp cutting edge, into a soil. Each test consists of an increment of penetration, generally vertical, followed by the expansion of a flat, circular, metallic membrane into the surrounding soil. The test provides information about the soil's in-situ stratigraphy, stress, strength, compressibility, and pore-water pressure for use in the design of earthworks and foundations. 1.2 This method includes specific requirements for the preliminary reduction of dilatometer test data. It does not specify how to assess or use soil properties for engineering design. 1.3 This method applies best to those sands, silts, clays, and organic soils that can be readily penetrated with the dilatometer blade, preferably using static push (see 4.2). Test results for soils containing primarily gravel-sized particles and larger may not be useful without additional research. 1.4 This method is not applicable to soils that cannot be penetrated by the dilatometer

Standard Test Method for Performing the Flat Plate Dilatometer

GOST R 56792-2015 高分子复合材料. 滚层缠绕分层的试验方法

Polymer composites. Test method on stratifying with winding on drum

GOST R 56814-2015 高分子复合材料. 夹层结构面板和芯材的超声检测

Polymer composites. Ultrasonic testing of sandwich constructions face sheet and core material

GOST R 56797-2015 高分子复合材料. 箍缠绕聚合物基体复合圆柱试样机械特性的轴向压缩试验方法

Polymer composites. Axial compressive test method for mechanical characteristics of hoop wound polymer matrix composite cylindrical specimens

GOST R 56786-2015 高分子复合材料. 钢筋平面内抗剪强度的测定方法

Polymer composites. Method for determination of shear strength in the plane of the reinforcement

GOST R 56787-2015 高分子复合材料. 无损检测

Polymer composites. Nondestructive testing

KS B 4107-2014 宽砂带磨床试验及测试方法

Wide belt sanders — Test and inspection methods

KS B 4108-2014(2020) 滚筒砂光机 - 测试和检查方法

Drum sanders — Test and inspection methods

KS B 4108-2014 辊式砂光机试验及测试方法

Drum sanders — Test and inspection methods

KS B 4107-2014(2020) 宽带砂光机 - 测试和检查方法

Wide belt sanders — Test and inspection methods

DB43/T 961-2014 家用电梯检验规范

Home elevator inspection specification

DIN 51233:2014 材料试验机械.安全规范.总则

Material testing machines - Safety specifications - General specifications

JB/T 6214-2014 仪器仪表可靠性验证试验及测定试验(指数分布)导则

本标准规定了寿命服从指数分布或近似服从指数分布的仪器仪表的可靠性验证试验及测定试验的一般原则和可靠性特征量的估计方法。 本标准适用于产品以两个相邻失效工作时间的均值，失效前工作时间的均值及失效率为可靠性特征量的可靠性试验。 本标准适用于假定相邻失效间工作时间(对可修复产品)或失效前工作时间(对不可修复产品)的统计分布是服从指数分布(失效率为常数)的产品。

Guideline for reliability validation test and determination test (exponential distribution) for instrumentation

JB/T 9375-2014 机械式拉力试验机 技术条件

本标准规定了机械式拉力试验机的技术要求、检验方法、检验规则、标志与包装等内容。本标准适用于最大试验力为5 kN~300 kN金属试验用的机械式拉力试验机(以下简称试验机)。机械式万能试验机也可参照使用。

Mechanical tensile testing machines.Specification

JB/T 9373-2014 拉力蠕变试验机 技术条件

本标准规定了拉力蠕变试验机的技术要求、检验方法、检验规则、标志与包装、随行文件等内容。本标准适用于以电阻炉加热,试验温度不超过1 100℃,在空气环境中进行金属材料拉伸蠕变试验用的拉力蠕变试验机(以下简称试验机),包括静重式、杠杆式、弹簧式和带有测力系统的试验机。对于超过1 100℃试验温度的试验机,宜根据用户及相关试验方法标准的要求参照执行。

Tensile-creep testing machines.Specification

ASTM E1012-14e1 在拉伸和压缩轴向力作用下验证试验框架和试样对齐的标准实施规程

Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application

ASTM E1949-03(2014) 金属接合电阻应变片的环境温度疲劳寿命的标准测试方法

Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages

DB32/T 2635-2014 电梯维护保养规范

本标准规定了电梯日常维护保养（以下简称维保）的术语和定义、基本要求、基本程序和维保记录。 本标准适用于乘客电梯、载货电梯、液压电梯、杂物电梯、自动扶梯和自动人行道（以下简称电梯）的维保。 防爆电梯、消防员电梯中与电梯相同部分的维保可参照本标准进行。 个人或者单个家庭自用电梯的维保可参照本标准进行。

Elevator Maintenance Specifications

DB22/T 135-2014 机械零配件产品质量检验通则

General rules for quality inspection of mechanical spare parts