21.220.30 链传动及其零件 标准查询与下载

BS ISO 4347:2015 叶片链, u型钩和滑轮. 尺寸, 测量力, 抗拉强度以及动力强度

Leaf chains, clevises and sheaves. Dimensions, measuring forces, tensile strengths and dynamic strengths

GSO ISO 6972:2015 焊接结构曲柄链铣机链条、附件和链轮

This International Standard specifies the characteristics of cranked-link1) mill chains of welded construction suitable for conveying bulk materials, together with associated attachments and chain sprockets. The chain dimensions specified in this International Standard ensure interchangeability of both complete chains and individual links for repair purposes. This International Standard is applicable to sprockets with between 5 and 36 teeth. Specifications are also given for eight types of attachment for use with the conveyor chains conforming to this International Standard.

Cranked-link mill chains of welded construction, attachments and sprockets

GSO ISO 1275:2015 运输和运输设备中使用的双间距滚子链、附件和螺纹

This International Standard specifies requirements for double-pitch precision roller chains suitable for the mechanical transmission of power and for conveyors, together with those for their associated sprockets. It covers dimensions, tolerances, length measurement, preloading and minimum tensile strengths. These double-pitch chains have been derived from some of the short-pitch transmission precision roller chains covered by ISO 606 having certain common dimensions but of double the pitch. The chains are intended for use under less onerous conditions with respect to speed and power transmitted than are the base chains from which they are derived. This International Standard primarily applies to sprockets with 5 to 75 teeth inclusive (with intermediate numbers of teeth 5 1/2 to 74 1/2 inclusive). The preferred numbers of teeth are 7, 9, 10, 11, 13, 19, 27, 38 and 57.

Double-pitch precision roller chains, attachments and associated chain sprockets for transmission and conveyors

GSO ISO 3512:2015 带有重型连接附件的输送链

This International Standard specifies dimensions, tolerances, measuring forces and minimum tensile strengths, together with the tooth gap forms and rim profiles of the associated chain wheels, for cranked-link or offset sidebar roller chains suitable for the mechanical transmission of power and allied applications under onerous conditions. The dimensions of chains specified ensure complete interchangeability of any given size and provide interchangeability of individual links of the chain for repair purposes. NOTE 1 Since these chains have been derived from an "inch" series of chains, their original dimensions are given in annex B.

Heavy-duty cranked-link transmission chains

GSO ISO 4347:2015 金属链条、铰接叉和槽滑轮尺寸、力和拉伸强度的测量

This International Standard specifies the characteristics of chains used for general lifting purposes, together with the rim profiles of sheaves and the chain attachment ends of clevises. It gives dimensions, limits for interchangeability, length measurement, preloading and minimum tensile strengths. It is not applicable to 8 × 8 lacing.

Leaf chains, clevises and sheaves -- Dimensions, measuring forces and tensile strengths

GSO ISO 6971:2015 带有焊接结构曲柄连杆、附件和齿形气缸的牵引链

This International Standard specifies the characteristics of cranked-link1) drag chains of welded construction suitable for conveying bulk materials, together with associated attachments and chain sprockets. The chain dimensions specified in this International Standard ensure interchangeability of both complete chains and individual links for repair purposes. This International Standard is applicable to sprockets with between 5 and 20 teeth. Specifications are also given for five types of attachment for use with the conveyor chains conforming to this International Standard.

Cranked-link drag chains of welded construction, attachments and sprockets

GSO ISO 606:2015 用于短起重和衬套链条的精密旋转气缸、相关链条的附件和链轮

This International Standard specifies the characteristics of short-pitch precision roller and bush chains with associated sprockets suitable for the mechanical transmission of power and allied applications. It covers dimensions, tolerances, length measurement, preloading, minimum tensile strengths and minimum dynamic strength. Although Clause 5 applies to chain sprockets for cycles and motor cycles, this International Standard is not applicable to their chains, which are covered by ISO 9633 and ISO 10190, respectively.

Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets

ISO 15654:2015 传输精度滚子链和叶式链的疲劳试验方法

This International Standard specifies an axial force fatigue test method for transmission roller chains and leaf chains. The tests being of the fluctuating tension type, carried out at room temperature in air, with the force applied along the longitudinal axis of the chain. It also specifies procedures for statistically analysing the test results and gives formats and elements for presenting the results of fatigue tests and analyses.

Fatigue test method for transmission precision roller chains and leaf chains

ISO 4347:2015 叶片链, u型钩和滑轮. 尺寸, 测量力, 抗拉强度以及动力强度

This International Standard specifies the characteristics of chains used for general lifting purposes, together with the rim profiles of sheaves and the chain attachment ends of clevises. It gives dimensions, limits for interchangeability, length measurement, preloading, minimum tensile strengths and minimum dynamic strengths.

Leaf chains, clevises and sheaves - Dimensions, measuring forces, tensile strengths and dynamic strengths

BS ISO 606:2015 短节矩精密传动辊子链和套筒链, 附件以及辅助链轮

Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets

ISO 606:2015 短节距精密传动辊子链和套筒链、附件和辅助链轮

Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets

JB/T 12490-2014 “O”型密封圈摩托车链条

"O" type seal motorcycle chain

JB/T 12490-2015 “O”型密封圈摩托车链条

本标准规定了“O”型密封圈摩托车用传动链条的术语和定义、结构型式、链号、基本参数、尺寸、技术要求、试验方法和配套使用的链轮。本标准适用于摩托车后驱动结构使用的链条。

O-ring sealed motorcycle chains

GSO ISO 10823:2014 转子系列选择指南

This International Standard gives guidelines for the selection of chain drives, composed of a roller chain and sprockets conformant with ISO 606, for industrial applications. The selection procedures and the chain ratings it describes provide for roller chain drives operating under specified conditions, as defined in 9.1, 9.2 and in Clause 10, with a life expectancy of approximately 15 000 h. Owing to the wide variations in loading characteristics, environmental conditions and achieved maintenance, it is desirable that the supplier of the chains and sprockets be consulted to ensure that the performance of the product meets the requirements specified both by the user and by this International Standard.

Guidelines for the selection of roller chain drives

GSO ISO 13203:2014 链条、链轮和配件 等效术语列表

This International Standard establishes a list of equivalent terms, in English, French and German, related to the main mechanical chains, classified in accordance with their design and/or use, as well as their principal components, fittings and sprockets. It does not define terms. It is applicable to the patterns of chains and components defined in the ISO standards referenced, as well as to many patterns of non-standardized chain that are used in special applications. As far as possible, the chains, sprockets and accessories are illustrated by an example. NOTE In addition to terms used in English and French, two of the three official ISO languages, this International Standard gives the equivalent terms in German; these are published under the responsibility of the member body for Germany (DIN). However, only the terms given in the official languages can be considered as ISO terms.

Chains, sprockets and accessories -- List of equivalent terms

GSO ISO 15654:2014 传动精密滚子链疲劳试验方法

This International Standard specifies an axial force fatigue test method for transmission roller chains, the tests being of the fluctuating tension type, carried out at room temperature in air, with the force applied along the longitudinal axis of the chain. It also specifies procedures for statistically analyzing the test results and gives formats and elements for presenting the results of fatigue tests and analyses.

Fatigue test method for transmission precision roller chains

KS V 9501-2014 游艇卸扣

Shackles for yachts

JIS B 1801:2014 短齿距传动精密滚子链及套筒链

This Standard specifies the roller chains and bush chains used for transmission in general (hereafter referred to as "chains"). The associated chain sprockets and attachments are detailed in Annexes JA and JB.

Short-pitch transmission precision roller chains and bush chains

JB/T 11802-2014 精密滚子链(套筒链)检验规则

本标准规定了精密滚子链(套筒链)成品的抽样、检验规范、质量评定方法及检验结果的综合质量判定程序。本标准适用于按GB/T 1243-2006的规定所制造的传动用短节距精密滚子链(套筒链)及结构相同、型式尺寸相近的其他链条。

Testing rules for precision roller chains and bush chains

JB/T 11803-2014 摩托车用齿形链链轮

本标准规定了摩托车用外啮合和内-外复合啮合齿形链渐开线齿形链轮的基本参数、主要尺寸、技术要求和检验方法。本标准适用于摩托车发动机正时机构等的齿形链传动用链轮。

Silent chain sprockets for motorcycles