21.220.30 链传动及其零件 标准查询与下载

JB/T 11803-2014 摩托车用齿形链链轮

本标准规定了摩托车用外啮合和内-外复合啮合齿形链渐开线齿形链轮的基本参数、主要尺寸、技术要求和检验方法。本标准适用于摩托车发动机正时机构等的齿形链传动用链轮。

Silent chain sprockets for motorcycles

GSO ISO 487:2013 滚子钢链、S 型和 C 型链轮及附件

This International Standard specifies the characteristics of a range of steel roller chains, dimensionally derived from the malleable iron type and suitable for the conditions of operation and maintenance prevailing in such fields as agriculture, building, quarrying and related industry, mechanical handling, etc., and of associated chain sprockets.

Steel roller chains, types S and C, attachments and sprockets

KS B ISO 10823-2013 滚子链传动选择指南

Guidance on the selection of roller chain drives

KS B ISO 10823:2013 滚子链驱动装置的导则

Guidance on the selection of roller chain drives

KS B ISO 6971-2013 焊接结构曲柄连杆拖链、附件和链轮

Cranked－link drag chains of welded construction, attachments and sprockets

KS B ISO 3512-2013 重型曲柄连杆传动链

Heavy－duty cranked－link transmission chains

KS B ISO 6971:2013 焊接结构拉曳用弯板链、附件和链轮

Cranked－link drag chains of welded construction, attachments and sprockets

KS B ISO 3512:2013 重载传动用弯板滚子链和链轮

Heavy－duty cranked－link transmission chains

KS B ISO 6972:2013 焊接结构工程用弯板链、附件和链轮

Cranked－link mill chains of welded construction, attachments and sprockets

JB/T 11637-2013 输送用钢制开式套筒销合链、附件和链轮

本标准规定了输送用钢制开式套筒销合链的术语和定义、结构型式、基本参数和尺寸、抗拉强度和链长精度,以及与这些链条相配的附件和链轮的技术要求。本标准适用于农业机械和环保机械等不洁净的场合使用的开式销合链、附件和链轮。

Open barrel steel pintle-type conveyor chains, attachments and sprockets

JB/T 8883-2013 农业机械用夹持输送链

本标准规定了农业机械用夹持输送链的结构型式、主要尺寸、技术要求和产品的标记等。本标准适用于行走式小麦、水稻收割机和定置式机动稻麦脱粒机,以及半喂入式联合收割机上使用的茎杆夹持输送链条。

Feed chains for agricultural machinery

JB/T 10348-2013 摩托车用齿形链条

本标准规定了摩托车用外啮合和内-外复合啮合齿形链条的基本参数、技术要求和检验方法。本标准适用于摩托车发动机正时及机油泵等机构使用的齿形链条。

Inverted tooth chains for motorcycles

JB/T 8820-2013 摩托车传动链条 磨损性能试验规范

本标准规定了摩托车传动链条磨损性能试验的技术要求、试验条件、试验方法和试验设备。本标准适用于摩托车(含其他行走机械)上的驱动用传动链条。

Motorcycle transmission chains.Testing rules of wear performance

JB/T 11636-2013 汽车用滚子链及套筒链

本标准规定了滚子链和套筒链(以下简称链条)的术语和定义、结构型式、基本参数和尺寸、链长精度、预拉、最小抗拉强度和动载试验载荷,以及测量用链轮尺寸及极限偏差。本标准适用于汽车发动机的凸轮轴以及驱动机构的精密滚子链和套筒链。

Roller chains and bush chains for automobiles

ANSI/ASME B29.26-2013 动力传动滚链的疲劳试验

Fatigue Testing Power Transmission Roller Chain

ANSI/ASME B29.21-2013 水、污水处理设备用700等级的铸造链、连接件及链轮

700 Class Chains, Attachments and Sprocket Teeth for Water and Sewage Treatment Plants

ASME B29.26-2013 动力传动滚子链的疲劳试验

This Standard covers fatigue testing, in axial tension, of power transmission roller chains in ASME B29.1M and ASME B29.3M, and nonstandard variants of those chains. The purpose of this Standard is to provide a uniform, reliable method of determining the fatigue strength of power transmission roller chains so that equivalent and comparable results can be obtained from axial fatigue testing at different laboratories.

Fatigue Testing Power Transmission Roller Chain

ASME B29.21-2013 水、污水处理设备用700级焊接钢和铸造链,附件及链轮

This Standard contains information on 700 Class cast iron, welded steel, stainless steel fabricated, and nonmetallic (plastic) chains, attachments and sprockets for water and sewage treatment plants. There are also Tables for (a) General chain dimensions, Ultimate strengths, Strand length, and Measuring load for checking chain length; minimum and maximum controlling dimensions for interchangeable chain links; (b) Chain clearance dimensions; (c) A42, F2, F22-6, F22-8, K2 and M1 attachments; (d) Pressure angle, Pitch diameter, and Clearance circle; (e) Maximum eccentricity and Face Run-out at root bottom diameter; and (f) Flange diameters for curved sidebar type chain.

700 Class Chains@ Attachments@ and Sprocket Teeth for Water and Sewage Treatment Plants

DIN ISO 487:2012 S型和C型钢制滚子链, 附件和链轮(ISO 487-1998)

Steel roller chains, types S and C, attachments and sprockets (ISO 487:1998)

DIN ISO 606:2012 短节矩精密传动辊子链和套筒链, 附件以及辅助链轮(ISO 606-2004)

Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets (ISO 606:2004)