21.220.30 链传动及其零件 标准查询与下载

DIN ISO 15654:2011 精确传输滚链的疲劳试验方法(ISO 15654-2004)

Fatigue test method for transmission precision roller chains (ISO 15654:2004)

JB/T 9152-2011 滑片式无级变速链

本标准规定了滑片式无级变速链（以下简称滑片链）的技术要求，包括规格、结构型式、尺寸、公差、最小抗拉强度、试验与检验方法等。 本标准适用于齿链式无级变速器所用的滑片式无级变速链。

Self-tooth-forming chains(P.I.V Chains)

JB/T 11079-2011 停车设备链条

本标准规定了机械式停车设备用链条的结构形式、尺寸、链长精度、抗拉强度和动载强度，以及与相关连接件有关的技术要求。 本标准适用于牵引、拉曳机械式立体停车设备载车板和升降机上所使用的滚子链及相关的连接件。

Car parking chains

JB/T 8546-2011 双铰接输送链

本标准规定了输送机用双铰接输送链的结构型式、规格、尺寸、最小抗拉强度以及所用轨道型式。 本标准适用于连续运输成件货物的轻型输送机用双铰接输送链。

Twin hinge conveyor chains

DIN ISO 4347:2011 叶片链,连接叉及槽轮.尺寸规格,计量力和抗拉强度(ISO 4347-2004)

This International Standard specifies the characteristics of chains used for general lifting purposes, together with the rim profiles of sheaves and the chain attachmens of clevises. It gives dimensions, limits for interchangeability, length measurement, preloading and minimum tensile strengths.It is not applicable to 8×8 lacing.

Leaf chaines, clevises and sheaves - Dimensions, measuring forces and tensile strengths (ISO 4347:2004)

JIS B 1810:2011 滚动链传动选择指南

This Japanese Industrial Standard gives guidelines for the selection of chain drives, composed of a roller chain, bush chain and sprockets specified in JIS B 1801.

Guidelines for the selection of roller chain drives

ASME B29.1-2011 精密动力传动滚子链,连接件及链轮

Roller Chains are a series of alternately assembled roller links and pin links in which the pins articulate inside the bushings and the rollers are free to turn on the bushings. Pins and bushings are press fit in their respective link plates. Roller chain may be single-strand having one row of roller links, or mutliple-strand havings more than one roll of roller links, in which the center plates are located between the strands of roller links.

Precision Power Transmission Roller Chains, Attachments, and Sprockets

ANSI/ASME B29.1-2011 精确电力传输滚筒链,附件和链轮

Roller Chains are a series of alternately assembled roller links and pin links in which the pins articulate inside the bushings and the rollers are free to turn on the bushings. Pins and bushings are press fit in their respective link plates. Roller chain may be single-strand having one row of roller links, or mutliple-strand havings more than one roll of roller links, in which the center plates are located between the strands of roller links.

Precision Power Transmission Roller Chains, Attachment and Sprockets

ANSI/ASME B29.100-2011 精密输电,双间距输电和双间距输送滚子链,附件和链轮

This Standard covers double-pitch roller chains (and their attachments and sprockets) which consist of series of alternately assembled roller links and pin links in which the pins articulate inside the bushings and the rollers are free to turn on the bushings. The pins and the bushings are press-fitted into their respective link plates.

Precision Power Transmission, Double-Pitch Power Transmission, and Double-Pitch Conveyor Roller Chains, Attachments and Sprockets

DIN 20182:2010 矿井口浴室衣服升降机的双环链.未经测试验非校准态

Double loop chain for hoisting clothes in pithead baths - Not tested, non-calibrated

DIN 20180:2010 矿井口浴室衣服升降机用滑轮

Pulley for clothes hoists in pithead baths

JIS B 1804:2010 板式链

Leaf chains

JB/T 8545-2010 自动扶梯梯级链、附件和链轮

本标准规定了自动扶梯用梯级链条的结构型式、基本参数和尺寸、抗拉强度和链长精度,以及与这些链条相配的附件和链轮的技术要求。

Escalator step chains, attachments and sprockets

JB/T 10969-2010 多板销轴链

本标准规定了多板销轴链的结构型式、尺寸、长度测量、预拉载荷及最小抗拉强度等。 本标准适用于矿场、冶金等行业应用的多板销轴链。

Galle chains

JB/T 6368-2010 链条产品分类

本标准规定了链条产品分类的方法。 本标准适用于对链条产品进行分类和命名。

Classification for chain products

JB/T 10970-2010 链条压出力试验规范

本标准规定了精密滚子链(含重载系列)、套筒链、摩托车链压出力试验的技术要求、样品制备、试验条件、试验方法等。 本标准适用于按GB／T 1243—2006、GB／T 14212—2003要求制造的链条。结构相同、型式尺寸相近的其他链条(不含电镀链条)，可参照执行。

Chains testing rules of extrusion force

ASME B29.8-2010 叶状链,Ｕ型钩和轮

The document covers the lacing, pin diameter, diameter of link plate holes, link plate contour and thickness, chain widths, and minimum ultimate tensile strengths and also recommends clevis and sheave design.

Leaf Chains, Clevises, and Sheaves

ANSI/ASME B29.8-2010 叶状链,Ｕ型钩和滑车轮

This Standard covers Leaf Chains (series of link plates alternately assembled with pins in such a way that the joint is free to articulate between adjoining pitches); Clevises (devices used to anchor the chain) and Sheaves (grooved wheels defined in Fig 6 of the Standard). This Standard is not intended to be submitted for consideration as an ISO or ISO/IEC JTC-1 Standard.

Leaf Chains, Clevises and Sheaves

KS B 1419-2009(2019) 双节距输送滚子链 附件和链轮

Double-pitch conveyor roller chains, attachments and sprocket

KS B 1419-2009 双螺距输送机滚轴链、附件及链轮齿

이 표준은 일반적으로 컨베이어에 사용하는 더블 피치 롤러 체인(이하 더블 피치 체인이라고

Double-pitch conveyor roller chains, attachments and sprocket