21.220.30 链传动及其零件 标准查询与下载

JIS B 1801:2009 短齿距传动精密滚子链及套筒链

This Standard specifies the roller chains and bush chains used for transmission in general (hereafter referred to as "chains").

Short-pitch transmission precision roller chains and bush chains

DIN ISO 10823 Berichtigung 1:2009 滚柱链传动装置的选择指南.技术勘误DIN ISO 10823-2006-10

Guidelines for the selection of roller chain drives (ISO 10823:2004), Corrigendum to DIN ISO 10823:2006-10 (ISO 10823:2004/Cor. 1:2008)

JB/T 10867-2008 输送用塑料平顶链和链轮

本标准规定了输送用塑料平顶链和链轮（以下简称塑料平顶链和链轮）的术语、代号、结构型式、基本参数和技术要求等。 本标准适用于输送各种瓶、罐、盒等轻型物品的塑料平顶链和链轮。

Plastic flat-top chains for conveyors and associated chain sprockets

JB/T 9154-2008 埋刮板输送机用链条、刮板和链轮

本标准规定了埋刮板输送机用链条及其刮板的结构型式、基本参数和主要技术要求，同时规定了叉形链轮的齿槽形状、基本参数和主要尺寸及公差。 本标准适用于GB/T 10596.1规定的埋刮板输送机用链条、刮板和链轮（以下分别简称链条、刮板和链轮）。

Drag chains, drags and associated chain sprockets

JIS B 1811:2008 传动精密辊链的疲劳试验方法

This Standard specifies the fatigue test method for transmission precision roller chains (hereafter referred to as "chains"). The test is of the fluctuating tension type conducted at room temperature with the force applied along the longitudinal axis of the chain. It also specifies procedures for statistic analyses of the test results and gives formats and elements for presenting the results of fatigue tests and analyses. NOTE: The International Standard corresponding to this Standard is as fol- lows. ISO 15654: 2004 Fatigue test method for transmission precision roller chains (MOD) In addition, symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/IEC Guide 21.

Fatigue test method for transmission precision roller chains

DIN 22253:2008 链式连接器.链钩型连接器.尺寸、要求和测试

Chain connectors - Shackle type connectors - Dimensions, requirements, testing

JB/T 10841-2008 输送用单节距和双节距空心销轴链及附件

本标准规定了输送用单节距和双节距空心销轴链(以下简称链条)的结构型式、主要参数、链节互换性极限尺寸、抗拉试验、链长精度、附件及配用链轮。 本标准适用于各种物料输送机用单节距和双节距空心销轴链。

Single-pitch and double-pitch hollow pin conveyor chains and attachments

JB/T 10842-2008 有衬套拉曳链

本标准规定的有衬套拉曳链适用于链速最大不超过1.0m/s的重载传动。

Draw bench chains with bushes

JB/T 10843-2008 无衬套拉曳链

本标准规定的无衬套拉曳链适用于链速最大不超过O.5m/s的重载传动。

Draw bench chains without bushes

ISO 10823:2004/cor 1:2008 滚子链传动的选择指南.技术勘误1

This standard is about Guidelines for the selection of roller chain drives; Technical Corrigendum 1

Guidelines for the selection of roller chain drives; Technical Corrigendum 1

ASME B29.2M-2007 逆齿(无声)链和链轮齿

This Standard includes the following information for Inverted Tooth (Silent) Chains: (a) Nomenclature; (b) General configuration; (c) Numbering system; (d) Tolerance for chain length; (e) Measuring loads; (f) General chain dimensions for 3/8 in. pitch chain and larger; and (g) Chain widths and sprocket-face profiles for 3/8 in. and larger pitch chain and for 3/16 in. pitch chain. This Standard also includes the following information for sprockets: (a) Tooth form dimensions for 3/8 in. Pitch Chain and larger and for 3/16 in. pitch chain; (b) Diameters and measuring dimensions for 3/8 in. Pitch Chain and larger and for 3/16 in. Pitch Chain; (c) Tolerances for diameters, over pin dimensions and eccentricity for 3/8 in. and larger Pitch Chain and for 3/16 in. Pitch Chain; (d) Hub diameters for 3/8 in. Pitch Chain and larger; (e) Tabulation of pitch diameter, outside diameter, over pin dimensions and guide groove diameter for 3/8 in. Pitch Chain and larger and for 3/16 in. Pitch Chain. Also included is "Supplementary Information" which contains suggestions relative to the application and use of the chains covered by this Standard.

Inverted Tooth (Silent) Chains and Sprockets

SANS 10823:2007 滚柱链传动装置的选择指南.

Composed of a roller chain and sprockets conformant with ISO 606, for industrial applications. The selection procedures and the chain ratings it describes provide for roller chain drives operating under specified conditions, as defined in 9.1, 9.2 and in Clause 10, with a life expectancy of approximately 15 000 h. Owing to the wide variations in loading characteristics, enviromental conditions and achieved maintenance, it is desirable that the supplier of the chains and sprockets be consulted to ensure that the performance of product meets the requirements specified both by the user and by this International Standard.

Guidelines for the selection of roller chain drives

JB/T 10703-2007 输送用钢制滚子链、附件和链轮

本标准规定了输送用钢制滚子链（以下简称链条）的结构型式、基本参数和尺寸、链节互换性极限尺寸、链条间隙尺寸、抗拉试验、链长精度及附件型式等，同时规定了配用链轮的基本参数、尺寸及公差。 本标准适用于各种物料输送机和提升机用链条及配用链轮。

Steel roller type conveyor chains, attachments and sprocket teeth

JB/T 5397-2006 滚子链和套筒链图形简化表示法

本标准规定了传动用短节距精密滚子链和传动用短节距精密套筒链装配图、零件图、部件图和输送用附件图形简化表示法。 本标准适用于滚子链、套筒链产品图及其技术文件。 本标准特别适用于多排及带有输送用附件的滚子链、套筒链。

The simple express method of roller chain and bush chain graph

ASTM A467/A467M-07 设备和盘链标准规范

1.1 This specification covers welded carbon steel machine chain and coil chain. Although these chains are not intended for pocket wheel use, they can be used for pocket and sprocket wheel use. This chain shall never be used for overhead lifting applications. 1.2 There are two classes each of machine and coil chain: 1.2.1 Class MS8212;Machine, straight-link steel chain, 1.2.2 Class MT8212;Machine, twist-link steel chain, 1.2.3 Class CS8212;Coil, straight-link chain, and 1.2.4 Class CT8212;Coil, twist-link steel chain. 1.3 The values stated in either inch-pound units or SI units shall be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system must be used independently of the other, without combining values in any way.

Standard Specification for Machine and Coil Chain

SANS 15654:2006 精密传动滚子链的疲劳试验方法

Specifies an axial force fatigue test method for transmission roller chains, the tests being of the fluctuating tension type, carried out at room temperature in air, with the force applied along the longitudinal axis of the chain. It also specifies proce

Fatigue test method for transmission precision roller chains

DIN 8192 Berichtigung 1:2006 DIN8187规定的滚子链的链轮.尺寸.技术勘误到DIN 8192:1987-03

Chain wheels for roller chains as specified in DIN 8187 - dimensions, Corrigenda to DIN 8192:1987-03

DIN 8191 Berichtigung 1:2006 符合DIN8190要求齿链用链轮的啮合.截面测量.技术勘误到DIN 8191:1998-01

Tooth form for chain wheels for inverted tooth chains complying with DIN 8190 - Dimensions of profile, Corrigenda to DIN 8191:1998-01

SANS 6972:2006 焊接结构的弯板链，附件和链轮

Specifies the characteristics of cranked-link mill chains of welded construction suitable for conveying bulk materials, together with associated attachments and chain sprockets. The chain dimensions specified in this standard ensure interchangeability of

Cranked-link mill chains of welded construction, attachments and sprockets

SANS 6971:2006 焊接结构弯板链，附件和链轮

Specifies the characteristics of cranked-link drag chains of welded construction suitable for conveying bulk materials, together with associated attachments and chain sprockets. The chain dimensions specified ensure interchangeability of both complete ch

Cranked-link drag chains of welded construction, attachments and sprockets