21.220.30 链传动及其零件 标准查询与下载

ISO 606:2004 短节距精密传动辊子链和套筒链、附件和辅助链轮

This International Standard specifies the characteristics of short-pitch precision roller and bush chains with associated sprockets suitable for the mechanical transmission of power and allied applications. It covers dimensions, tolerances, length measurement, preloading, minimum tensile strengths and minimum dynamic strength. Although Clause 5 applies to chain sprockets for cycles and motor cycles, this International Standard is not applicable to their chains, which are covered by ISO 9633 and ISO 10190, respectively.

Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets

ISO 4347:2004 板式链、端接头及槽轮.尺寸、计量力和抗拉强度

This International Standard specifies the characteristics of chains used for general lifting purposes, together with the rim profiles of sheaves and the chain attachment ends of clevises. It gives dimensions, limits for interchangeability, length measurement, preloading and minimum tensile strengths. It is not applicable to 8 × 8 lacing.

Leaf chains, clevises and sheaves - Dimensions, measuring forces and tensile strengths

ISO 10823:2004 滚柱链传动的选择指南

This International Standard gives guidelines for the selection of chain drives, composed of a roller chain and sprockets conformant with ISO 606, for industrial applications. The selection procedures and the chain ratings it describes provide for roller chain drives operating under specified conditions, as defined in 9.1, 9.2 and in Clause 10, with a life expectancy of approximately 15 000 h. Owing to the wide variations in loading characteristics, environmental conditions and achieved maintenance, it is desirable that the supplier of the chains and sprockets be consulted to ensure that the performance of the product meets the requirements specified both by the user and by this International Standard.

Guidelines for the selection of roller chain drives

KS B 1407-2003 传动用滚子链及套筒滚柱链

이 규격은 일반적인 전동에 사용하는 롤러 체인 및 부시 체인(이하 롤러 체인이라 한다.)에

Transmission roller chains

KS B 1407-2003(2023) 传动滚子链

Transmission roller chains

KS B 1407-2003(2018)(英文版) 变速箱滚子链

Transmission roller chains

KS B 1407-2003(2018) 变速箱滚子链

Transmission roller chains

BS ISO 6971:2002 焊接结构用弯板拉曳链、附件和链轮

This International Standard specifies the characteristics of cranked-link drag chains of welded construction suitable for conveying bulk materials, together with associated attachments and chain sprockets. The chain dimensions specified in this International Standard ensure interchangeability of both complete chains and individual links for repair purposes. This International Standard is applicable to sprockets with between 5 and 20 teeth. Specifications are also given for five types of attachment for use with the conveyor chains conforming to this International Standard. note: 1) In the USA, the term "offset sidebar" is used in place of "cranked link".

Cranked-link drag chains of welded construction, attachments and sprockets

BS ISO 6972:2002 焊接结构工程用弯板链、附件和链轮

This International Standard specifies the characteristics of cranked-link mill chains of welded construction suitable for conveying bulk materials, together with associated attachments and chain sprockets. The chain dimensions specified in this International Standard ensure interchangeability of both complete chains and individual links for repair purposes. This International Standard is applicable to sprockets with between 5 and 36 teeth. Specifications are also given for eight types of attachment for use with the conveyor chains conforming to this International Standard. note: 1) In the USA, the term "offset sidebar" is used in place of "cranked link".

Cranked-link mill chains of welded construction, attachments and sprockets

ISO 6971:2002 焊接结构拉曳用弯板链、附件和链轮

This International Standard specifies the characteristics of cranked-link drag chains of welded construction suitable for conveying bulk materials, together with associated attachments and chain sprockets. The chain dimensions specified in this International Standard ensure interchangeability of both complete chains and individual links for repair purposes. This International Standard is applicable to sprockets with between 5 and 20 teeth. Specifications are also given for five types of attachment for use with the conveyor chains conforming to this International Standard. note: 1) In the USA, the term "offset sidebar" is used in place of "cranked link".

Cranked-link drag chains of welded construction, attachments and sprockets

ISO 6972:2002 焊接结构工程用弯板链、附件和链轮

This International Standard specifies the characteristics of cranked-link mill chains of welded construction suitable for conveying bulk materials, together with associated attachments and chain sprockets. The chain dimensions specified in this International Standard ensure interchangeability of both complete chains and individual links for repair purposes. This International Standard is applicable to sprockets with between 5 and 36 teeth. Specifications are also given for eight types of attachment for use with the conveyor chains conforming to this International Standard. note: 1) In the USA, the term "offset sidebar" is used in place of "cranked link".

Cranked-link mill chains of welded construction, attachments and sprockets

ASME B29.8-2002 叶片链、U型钩和滑轮

The scope of this Standard covers the lacing, pin diameter, diameter of link plate holes, link plate contour and thickness, chain widths, and minimum ultimate tensile strengths. The Standard also recommends clevis and sheave design. Supplementary information to guide users in the application of these chains appeared in the 1958 edition and was deleted in 1960.

Leaf Chains, Clevises, and Sheaves

JB/T 10348-2002 摩托车用齿形链条

本标准规定了摩托车用外接触式齿形链条的基本参数、技术要求和检验方法。 　　本标准适用于摩托车发动机正时、起动及液压泵等机构的传动。

Inverted tooth chains for motorcycles

ASME B29.26 Errata-2002 疲劳试验.动力传动滚子链.勘误表

Fatigue testing - Power transmission roller chain; Errata

Fatigue testing - Power transmission roller chain; Errata

KS B 1335-2001 弯钩

이 규격은 호이스트 등에 사용하는 한쪽 훅 형태의 섕크 훅 및 아이 훅(이하 통틀어 훅이라

Hooks

ANSI/ASME B29.26M-2001 动力传动滚链的疲劳试验

Covers fatigue testing, in axial tension, of power transmission roller chains in ASME B29.1M and B29.3M, and nonstandard variants of those chains.

Fatigue Testing Power Transmission Roller Chain

KS B ISO 10823-2001(2011) 关于选择滚子链驱动的指导

Guidance on the selection of roller chain drives

AIA/NAS NAS 578-2001 联邦科学委员会 5340.Rev. 8,移动桶固定器

NAS487, "Nut - Instrument Mountt1,w as adopted on 29-SEP-95 for use by the Department of Defense (DoD). Proposed changes by DoD activities must be submitted to the DoD Adopting Activity: Commander, Defense Industrial Supply Cent7e0r0, Robbins Avenue, Philadelphia, FA 19111-5096. DoD activities may obtain copies of this standard from the Standardization Document D eOsrkd,e r7 00 Robbins Avenue, Building 4D, Philadelphia, FA 19111-5094. The private sector and other Government agencies may purchase cop from the Aerospace Industries Associatofe dA merica Inc., 1250 Eye Street, N.W., Washington, 2D0C0 05-3922

Retainer - Floating Barrel Nut Rev. 8; FSC 5340

JB/T 8883-2001 农业机械用夹持输送链

本标准规定了农业机械用夹持输送链的结构型式、尺寸、相关技术要求和产品的代号等。 本标准适用于行走式小麦、水稻收割机和定置式机动稻麦脱粒机，以及半喂入式联合收割机上使用的茎杆夹持输送链条。

Feed chains for agricultural machinery

ASME B29.22-2001 无铆钉模锻链、链轮齿传动链/传动夹头

The drop forged rivetless chain has widespread use in many industries on trolleys, scraper flights, assembly, and similar conveyors. Because materials do not tend to pack in its open structure, the drop forged rivetless chain is used extensively for flight conveyors. Its design permits both horizontal and vertical operation over irregular routes, making it particularly acceptable for trolley conveyor service.

Drop Forged Rivetless Chains, Sprocket Teeth Drive Chain/Drive Dogs