23.020.35 标准查询与下载

EN ISO 10961:2019 煤气罐.气瓶捆绑.设计,制造,测试和检验

This document specifies the requirements for the design, construction, testing and initial inspection of a transportable cylinder bundle. It is applicable to cylinder bundles containing cylinders containing compressed gas, liquefied gas and mixtures thereof. It is also applicable to cylinder bundles for acetylene. Additional requirements for acetylene cylinder bundles containing acetylene in a solvent are provided in Annex B. This document does not, however, cover acetylene cylinder bundles with solvent‐free acetylene cylinders. This document specifies the additional requirements that apply when individual cylinders are assembled into a bundle. Unless otherwise stated, individual cylinders within a cylinder bundle conform to applicable standards for single cylinders. This document is intended primarily for industrial gases other than liquefied petroleum gas (LPG), but it can also be used for LPG. This document does not apply to packages in which cylinders are manifolded together in a frame that is designed to be fixed permanently to a road vehicle, to a railway wagon or to the ground as a customer storage vessel. It also does not apply to cylinder bundles that are designed for use in extreme environmental or operational conditions (e.g. offshore cylinder bundles) when additional and extraordinary requirements are imposed to maintain safety standards, reliability and performance.

Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2019)

BS EN ISO 9809-3:2019 气瓶 可再充装无缝钢气瓶和管材的设计、制造和测试 正火钢瓶和管材

What is ISO 9809-3 - Gas cylinders about?    ISO 9809 is a series on gas cylinders. A gas cylinder is a  pressure vessel for the storage and containment of gases at above atmospheric pressure. High-pressure gas cylinders are also called bottles. ISO 9809-3 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at the time of manufacture for refillable seamless steel gas cylinders and tubes with water capacities up to and including 450 l. ISO 9809-3 is applicable to cylinders and tubes for compressed, liquefied, and dissolved gases and for normalized or normalized and tempered steel cylinders and tubes.

Gas cylinders. Design, construction and testing of refillable seamless steel gas cylinders and tubes - Normalized steel cylinders and tubes

BS EN ISO 9809-1:2019 气瓶 可再充式无缝钢气瓶和管子的设计、制造和试验 抗拉强度小于 1100 MPa 的调质钢瓶和管子

What is ISO 9809 ‑ 1 - Gas cylinders about?    ISO 9809 is a series on gas cylinders. A gas cylinder is a pressure vessel for the storage and containment of  gases at above  atmospheric pressure. ISO 9809 ‑ 1 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at the time of manufacture for refillable seamless steel gas cylinders and tubes with water capacities up to and including 450 l.   ISO 9809 ‑ 1 is applicable to cylinders and tubes for compressed, liquefied, and dissolved gases and for quenched and tempered steel cylinders and tubes with a maximum actual tensile strength R ma of less than 1 100 MPa.   Who is ISO 9809 ‑

Gas cylinders. Design, construction and testing of refillable seamless steel gas cylinders and tubes - Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa

BS EN ISO 9809-2:2019 气瓶 可再充式无缝钢气瓶和管子的设计、制造和试验 抗拉强度大于或等于 1 100 MPa 的调质钢瓶和管子

What is ISO 9809 ‑ 2 - Gas cylinders about?    ISO 9809 is a series on gas cylinders. A gas cylinder is a pressure vessel for the storage and containment of gases at above atmospheric pressure. ISO 9809 ‑ 2 specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at the time of manufacture for refillable seamless steel gas cylinders and tubes with water capacities up to and including 450 l.   ISO 9809 ‑

Gas cylinders. Design, construction and testing of refillable seamless steel gas cylinders and tubes - Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1 100 MPa

EN ISO 9809-1:2019 气瓶可重复充装的无缝钢气瓶设计,结构和试验.第1部分:抗拉强度低于1100 MPa的淬火加回火钢瓶

This document specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at time of manufacture for refillable seamless steel gas cylinders and tubes with water capacities up to and including 450 l. It is applicable to cylinders and tubes for compressed, liquefied and dissolved gases and for quenched and tempered steel cylinders and tubes with a maximum actual tensile strength Rma of less than 1 100 MPa.

Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 1: Quenched and tempered steel cylinders and tubes with tensile strength less than 1 100 MPa (ISO 9809-1:2019)

EN ISO 9809-2:2019 气瓶.可重复充装的无缝钢气瓶设计,结构和试验.第2部分:抗拉强度大于或等于1100 MPa的淬火加回火钢瓶

This document specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at time of manufacture for refillable seamless steel gas cylinders and tubes with water capacities up to and including 450 l. it is applicable to cylinders and tubes for compressed, liquefied and dissolved gases and for quenched and tempered steel cylinders and tubes with an actual tensile strength Rma ≥ 1 100 MPa. It is not applicable to cylinders and tubes with Rma, max > 1 300 MPa for diameters >140 mm and guaranteed wall thicknesses a′ ≥ 12 mm and for cylinders and tubes with Rma, max > 1 400 MPa for diameters ≤140 mm and guaranteed wall thicknesses a′ ≥ 6 mm because, beyond these limits, additional requirements can apply.

Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 2: Quenched and tempered steel cylinders and tubes with tensile strength greater than or equal to 1 100 MPa (ISO 9809-2:2019)

EN ISO 9809-3:2019 气瓶.可重复充装的无缝钢气瓶设计,结构和试验.第3部分:正火钢瓶

This document specifies minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at the time of manufacture for refillable seamless steel gas cylinders and tubes with water capacities up to and including 450 l. It is applicable to cylinders and tubes for compressed, liquefied and dissolved gases and for normalized or normalized and tempered steel cylinders and tubes.

Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 3: Normalized steel cylinders and tubes (ISO 9809-3:2019)

BS EN ISO 10460:2018 气瓶 焊接铝合金、碳钢和不锈钢气瓶 定期检查和测试

1   Scope This document specifies the requirements for the periodic inspection and testing of welded aluminium-alloy, carbon and stainless steel gas cylinders of water capacity from 0,5 l to 150 l intended for compressed and liquefied gas service under pressure and to verify the integrity of such gas cylinders for further service. It also applies, as far as is practical, to cylinders of less than 0,5 l water capacity and greater than 150 l up to 450 l. This document does not apply to the periodic inspection and testing of acetylene cylinders or composite (fully wrapped or hoop-wrapped) cylinders. It is primarily intended for use with cylinders containing industrial gases other than liquefied petroleum gas (LPG). This document may also be applicable to LPG. Requirements for LPG applications are also provided in ISO 10464.

Gas cylinders. Welded aluminium-alloy, carbon and stainless steel gas cylinders. Periodic inspection and testing

EN ISO 10462:2013/A1:2019 气瓶.乙炔瓶.周期性检验和维修 包含修改件A1,2019

Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance - Amendment 1 (ISO 10462:2013/Amd 1:2019)

EN ISO 14456:2016/A1:2019 气瓶的气体的性质及其分类(FTSC)代码 包含修改件A1,2019

Gas cylinders - Gas properties and associated classification (FTSC) codes - Amendment 1 (ISO 14456:2015/Amd 1:2019)

BS ISO 11513:2019 气瓶 含有低于大气压气体包装材料（不包括乙炔）的可再填充焊接钢瓶 设计、施工、试验、使用和定期检验

What is ISO 11513 - Gas cylinders about? ISO 11513 is a series on gas cylinders. A gas cylinder is a pressure vessel for the storage and containment of gases at above atmospheric pressure. High-pressure gas cylinders are also called bottles.  ISO 11513 specifies minimum requirements for the material, design, construction, workmanship, examination and testing at the manufacture of refillable welded steel cylinders for the sub-atmospheric pressure storage of liquefied and compressed gases. ISO 11513 only applies to the cylinders themselves, irrespective of the materials contained therein (e.g., adsorbents, media, materials and/or gases) and other related applications. The cylinders have a test pressure not greater than 42 bar and a water capacity from 0,5 l up to and including 12 l exposed to ambient temperatures for the purpose of facilitating the sub-atmospheric pressure storage of liquefied and compressed gases as adsorbed gases. Minimum requirements for inspection at the time of fill and periodic inspection and testing are also specified in ISO 11513 . Who is ISO 11513 -

Gas cylinders. Refillable welded steel cylinders containing materials for sub-atmospheric gas packaging (excluding acetylene). Design, construction, testing, use and periodic inspection

DIN EN ISO 13769:2018 气瓶. 钢印标记(ISO 13769-2018); 德文版本EN ISO 13769-2018

This Draft International Standard specifies stamp marking of transportable gas cylinders and tubes of volumes greater than 0,120 l and up to or equal to 3000 l, including: - steel and aluminium-alloy gas cylinders; - composite gas cylinders; - acetylene cylinders; - liquefied petroleum gas (LPG) cylinders (see Annex A); and - small cylinders (see Annex B). These hereafter are referred to as "cylinders."

Gas cylinders - Stamp marking (ISO 13769:2018); German version EN ISO 13769:2018

DIN EN 13322-1:2018 可运输气瓶. 可再灌充焊接钢制气瓶. 设计和结构. 第1部分: 碳钢; 德文版本EN 13322-1-2003+A1-2006

This Standard sets out minimum requirements concerning material, design, construction and workmanship, manufacturing processes and testing of refillable transportable welded carbon steel gas cylinders of water capacities from 0,5 l up to and including 150 l for compressed, liquefied and dissolved gases. For acetylene service, additional requirements for the cylinder and the basic requirements for the porous mass are given in EN 1800. For those cylinders made from high frequency induction (HFI) welded steel tubes, the requirements are given in annex A.

Transportable gas cylinders - Refillable welded steel gas cylinders - Design and construction - Part 1: Carbon steel; German version EN 13322-1:2003 + A1:2006

ISO 10460:2018 气瓶. 焊接铝合金碳和不锈钢气瓶. 定期检验和试验

Gas cylinders - Welded aluminium-alloy, carbon and stainless steel gas cylinders - Periodic inspection and testing

BS EN ISO 13769:2018 气瓶 印章标记

Gas cylinders. Stamp marking

EN ISO 13769:2018 气瓶.钢印标记

This document specifies stamp marking of transportable gas cylinders of volumes greater than 0,12 l and up to or equal to 150 l and tubes of volumes up to or equal to 3 000 l, including: - steel and aluminium-alloy gas cylinders; - composite gas cylinders; - acetylene cylinders; - liquefied petroleum gas (LPG) cylinders (see Annex A); and - small cylinders (see Annex B). Unless noted by exception, the use of "cylinder" in this document refers to the above types of cylinders. Non-refillable cylinders are addressed by this standard.

Gas cylinders - Stamp marking (ISO 13769:2018)

DIN EN 1440:2018 液化石油气设备和附件. 液化石油气 (LPG) 用可运输可再充装传统焊接和钎焊钢瓶. 定期检查; 德文版本EN 1440-2016+A1-2018

This European Standard specifies procedures for the periodic inspection and testing, of transportable refillable LPG cylinders with a water capacity from 0,5 l up to and including 150 l. This European Standard is applicable to welded and brazed steel LPG cylinders with a specified minimum wall thickness designed according to EN 1442, EN 12807, EN 13322-1, or equivalent standard (e. g. national codes). This European Standard is intended to be applied to cylinders complying with RID/ADR (including pi marked cylinders) and also to existing non RID/ADR cylinder populations. NOTE The requirements of RID/ADR take precedence over those of this standard in the case of cylinders complying with that regulation, including pi marked cylinders. This European Standard does not apply to cylinders permanently installed in vehicles.

LPG equipment and accessories - Transportable refillable traditional welded and brazed steel Liquefied Petroleum Gas (LPG) cylinders - Periodic inspection; German version EN 1440:2016+A1:2018

DIN EN 16728:2018 液化石油气设备和附件. 传统焊接和钎焊钢瓶以外的液化石油气 (LPG) 用可运输可再充装气瓶. 定期检查; 德文版本 EN 16728-2016+A1-2018

The primary objective of the periodic inspection of transportable refillable liquefied petroleum gas (LPG) cylinders is that, on the completion of the tests, the cylinders may be re-introduced into service for a further period of time. This European Standard specifies procedures for periodic inspection and testing, for transportable refillable LPG cylinders with a water capacity from 0,5 l up to and including 150 l. It is applicable to the following: - welded steel LPG cylinders manufactured to an alternative design and construction, see EN 14140 or equivalent standard; - welded aluminium LPG cylinders, see EN 13110 or equivalent standard; - composite LPG cylinders, see EN 14427 or equivalent standard; - over-moulded cylinders designed and manufactured according to EN 1442 or EN 14140, see Annex F. This European Standard does not apply to cylinders permanently installed in vehicles.

LPG equipment and accessories - Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders - Periodic inspection; German version EN 16728:2016+A1:2018

ISO 13769:2018 储气瓶.钢印标记

This document specifies stamp marking of transportable gas cylinders of volumes greater than 0,12 l and up to or equal to 150 l and tubes of volumes up to or equal to 3000 l, including: — steel and aluminium-alloy gas cylinders; — acetylene cylinders; — liquefied petroleum gas (LPG) cylinders (see Annex A); and — small cylinders (see Annex B). Unless noted by exception, the use of “cylinder” in this document refers to the above types of cylinders. Non-refillable cylinders are addressed by this standard.

Gas cylinders - Stamp marking

EN ISO 11363-1:2018 气瓶.气瓶与瓶阀连接用17E和25E锥螺纹.第1部分:规范

ISO 11363-1:2018 specifies dimensions and tolerances for taper screw threads of nominal diameter 17,4 mm (designated as 17E) and 25,8 mm (designated as 25E) used for the connection of valves to gas cylinders. ISO 11363-1:2018 does not cover the connection requirements for - mechanical strength, - gas tightness, and - capability of repeated assembly and dismounting operations. Gauge inspection is covered by ISO 11363‑2.

Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications (ISO 11363-1:2018)