23.020.35 标准查询与下载

DIN EN ISO 11623:2018 气瓶.组合结构.定期检查和试验(ISO 11623-2015,修正版 2017-02);德文版本EN ISO 11623-2015

This International Standard specifies the requirements for periodic inspection and testing and to verify the integrity for further service of hoop-wrapped and fully-wrapped composite transportable gas cylinders, with aluminium-alloy, steel or non-metallic liners or of linerless construction (Types 2, 3, 4, and 5), intended for compressed, liquefied or dissolved gases under pressure, of water capacity from 0,5 l up to 450 l. This International Standard is written to address the periodic inspection and testing of composite cylinders constructed to ISO 11119-1, ISO 11119-2, and ISO 11119-3 standards and can be applied to other composite cylinders designed to comparable standards when authorized by the competent authority. As far as practicable, this International Standard also can be applied to cylinders of less than 0,5 l water capacity.

Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015, Corrected version 2017-02); German version EN ISO 11623:2015

BS ISO 5145:2017 气瓶 用于气体和气体混合物的钢瓶阀门出口 选择和尺寸

1   Scope This document establishes practical criteria for determining valve outlet connections for gas cylinders. It applies to the selection of gas cylinder valve outlet connections and specifies the dimensions for a number of them. This document is not applicable to connections used for cryogenic gas withdrawal or gases for breathing equipment, which are the subjects of other International Standards. NOTE Other safeguard provisions like labelling or colour coding are not affected by this document.

Gas cylinders. Cylinder valve outlets for gases and gas mixtures. Selection and dimensioning

EN ISO 11363-2:2017 气瓶气瓶与瓶阀连接用17E和25E锥螺纹.第2部分:检验量规

Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 2: Inspection gauges

ISO 5145:2017 储气瓶.气体和混合气体气瓶瓶阀出气口. 选择和尺寸

This document establishes practical criteria for determining valve outlet connections for gas cylinders. It applies to the selection of gas cylinder valve outlet connections and specifies the dimensions for a number of them. This document is not applicable to connections used for cryogenic gas withdrawal or gases for breathing equipment, which are the subjects of other International Standards. NOTE Other safeguard provisions like labelling or colour coding are not affected by this document.

Gas cylinders - Cylinder valve outlets for gases and gas mixtures - Selection and dimensioning

BS EN ISO 15996:2017 气瓶 残压阀 带残压装置的气瓶阀的规范和型式试验

Gas cylinders. Residual pressure valves. Specification and type testing of cylinder valves incorporating residual pressure devices

EN ISO 15996:2017 储气瓶.剩余压力阀.一般要求和型式试验

ISO 15996:2017 specifies design, type testing and marking requirements for cylinder valves incorporating residual pressure devices, hereinafter referred to as residual pressure valves (RPVs). This document applies to the following types of RPVs: a) cylinder valves intended to be fitted to refillable transportable gas cylinders; b) main valves (excluding ball valves) for cylinder bundles; c) cylinder valves or main valves with integrated pressure regulator (VIPR); d) valves for pressure drums and tubes; which convey compressed or liquefied gases. NOTE Where there is no risk of ambiguity, cylinders, pressure drums, tubes and cylinder bundles are addressed with the collective term "cylinder" within this document. These requirements are in addition to those in ISO 10297. For RPD stand-alone devices this document can also be applied. ISO 15996:2017 does not apply to RPVs for portable fire extinguishers, cryogenic equipment, low pressure refrigerant gases (cylinder test pressure less than 50 bar), dissolved gases or liquefied petroleum gas (LPG).

Gas cylinders - Residual pressure valves - Specification and type testing of cylinder valves incorporating residual pressure devices (ISO 15996:2017)

DIN EN 13952:2017 液化石油气设备和附件.LPG 气瓶的填充气程序;德文版本EN 13952-2017

This European Standard specifies the requirements for the operation of a cylinder filling plant to ensure that filling of transportable refillable LPG cylinders is carried out in a controlled and safe manner. This European Standard is applicable to the filling of cylinders complying with RID/ADR (including pi marked cylinders) and also to existing non RID/ADR cylinder populations. This European Standard is applicable to the following: - welded and brazed steel LPG cylinders with a specified minimum wall thickness (see EN 1442 and EN 12807 or an equivalent standard); - welded steel LPG cylinders without specified minimum wall thickness (see EN 14140 or an equivalent standard); - welded aluminium LPG cylinders (see EN 13110 or an equivalent standard); - composite LPG cylinders (see EN 14427 or an equivalent standard); and - over-moulded cylinders (OMC). This European Standard does not cover the requirements for filling LPG cylinders that are designed and equipped for filling by the user.

LPG equipment and accessories - Filling operations for LPG cylinders; German version EN 13952:2017

BS EN 1439:2017 液化石油气(LPG)设备和附件.LPG瓶灌装前、灌装中和灌装后的可运输、可再填充检测用程序

LPG equipment and accessories. Procedure for checking transportable refillable LPG cylinders before, during and after filling

BS EN 1442:2017 液化石油气设备及配件 用于液化石油气的可运输可再充装焊接钢瓶 设计与施工

LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Design and construction

BS EN ISO 11114-4:2017 可移动气瓶 气瓶和阀门材料与气体含量的兼容性 选择抗氢脆钢的试验方法

Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Test methods for selecting steels resistant to hydrogen embrittlement

NF E29-795:2017 气瓶.卤代烃的调节.充注与排放方法.卤代烃的回收利用

Gas cylinders - Conditioning of halogenated hydrocarbons - Filling and draining method - Reclaimation of halogenated hydrocarbons

DIN EN 13807:2017 移动式气瓶. 蓄电池车辆和多单元气瓶(MEGC). 设计, 制造, 鉴定和检测; 德文版本EN 13807-2017

Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing; German version EN 13807:2017

DIN EN 13110:2017 可运输可灌装液化石油气(LPG)焊接铝瓶.设计和制造.德文版本EN 13110-2012+A1-2017

LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction; German version EN 13110:2012+A1:2017

ISO/TR 19811:2017 气瓶. 复合结构气瓶和管件的使用寿命试验

Gas cylinders - Service life testing for cylinders and tubes of composite construction

EN ISO 10297:2014/A1:2017 气瓶.气瓶阀.规范和型号测试 包含修改件A1,2017

Gas cylinders - Cylinder valves - Specification and type testing - Amendment 1: Pressure drums and tubes (ISO 10297:2014/Amd 1:2017)

NF E29-648-1/A1:2017 气瓶. 气瓶和阀材料与所装气体的兼容性. 第1部分: 金属材料. 修改件1

Le présent document amende la norme NF EN ISO 11114-1. Les modifications portent sur:le remplacement des notes en 4.3.2 " Remarques particulières " et 6.6.2 " Compatibilité des mélanges de gaz " ;le remplacement de toutes les lignes correspondant aux numéros de gaz 7, 8, 9, 13, 18, 20, 22, 46, 49, 60, 63, 69, 74, 83, 90, 91, 96, 100, 101, 102, 103 en 6.3.2 " Abréviations des matériaux ".

Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1 : metallic materials - Amendment 1

ISO 11114-4:2017 移动气瓶.气瓶和瓶阀材料与盛装气体的相容性.第4部分:选择抗氢脆钢的试验方法

Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement

ISO/TS 15453:2017 气瓶. 现有气瓶评估和现有气瓶在其他司法管辖区的安全使用考量

Gas cylinders - Seamless steel and aluminium-alloy gas cylinders - Evaluation of existing gas cylinders and consideration of their safe use in other jurisdictions

EN ISO 11114-4:2017 气瓶的气瓶和阀门材料与气体含量第4部分兼容性:选择抗氢脆钢试验方法(ISO 11114-4:2017)

Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement

BS EN 13807:2017 可移动气瓶 电池车辆和多元素气体容器(MEGC)设计、制造、鉴定和测试

Transportable gas cylinders. Battery vehicles and multiple-element gas containers (MEGCs). Design, manufacture, identification and testing