23.040.70 软管和软管组件 标准查询与下载
共找到 1336 条与 软管和软管组件 相关的标准，共 90 页
1 Scope This document specifies the requirements for three types, three classes and two categories of textile-reinforced rubber hose for compressed air, up to a maximum working pressure of 2,5 MPa (25 bar) with an operating-temperature range of −40 °C to +70 °C, depending on the type and category.
Rubber hoses, textile-reinforced, for compressed air. Specification
- ICS
- 23.040.70
- CCS
- 发布
- 2024-05-31
- 实施
- 2024-05-31
本文件规定了紫外光固化超大管径内衬软管的要求、试验方法、检验规则、标志、包装、运输、贮存。
UV cured ultra large diameter lined hose
- ICS
- 23.040.70
- CCS
- C292
- 发布
- 2024-04-08
- 实施
- 2024-04-20
本文件规定了橡胶粉末地下渗灌管的术语和定义、型号表示方法、技术要求、试验方法、检验规则、标志、包装和贮存。 本文件适用于橡胶粉末地下渗灌管的制造、运输、使用与质量检验。
Product Specification for Rubber Powder Underground Seepage Pipe
- ICS
- 23.040.70
- CCS
- A051
- 发布
- 2023-12-25
- 实施
- 2023-12-25
本文件规定了粪水还田用拖拽软管的术语和定义、材料和结构、要求、检验方法、检验规则、标志、包装、贮存。 本文件适用于畜禽粪水还田用拖拽软管。
Drag Hoses for Liquid Manure Application
- ICS
- 23.040.70
- CCS
- C292
- 发布
- 2023-12-08
- 实施
- 2023-12-15
Standard Practice for Application of Hose Stream
- ICS
- 23.040.70
- CCS
- 发布
- 2023-12-01
- 实施
本文件规定了金属软管检测装置的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于金属软管检测装置的生产及检验。
Metal hose detection device
- ICS
- 23.040.70
- CCS
- C342
- 发布
- 2023-11-14
- 实施
- 2023-11-29
Standard Practice for Application of Hose Stream
- ICS
- 23.040.70
- CCS
- 发布
- 2023-10-15
- 实施
本文件规定了防藻耐压 PVC 软管的术语定义、技术要求、试验方法、检验规则、标识、包装、运输及贮存。 本文件适用于防藻耐压 PVC 软管的生产和检验。（以下简称“软管”）
Algae-proof and pressure-resistant PVC hose
- ICS
- 23.040.70
- CCS
- C291
- 发布
- 2023-09-27
- 实施
- 2023-10-12
Rubber hoses and hose assemblies for saturated steam — Specification
- ICS
- 23.040.70
- CCS
- 发布
- 2023-09
- 实施
BS EN ISO 4080. Rubber and plastics hoses and tubing, and their assemblies. Determination of permeability to gas
- ICS
- 23.040.70
- CCS
- 发布
- 2023-08-03
- 实施
- 2023-08-03
General technical requirements for assembly of backfill pipes for ecological restoration in mining areas
- ICS
- 23.040.70
- CCS
- G 42
- 发布
- 2023-07-28
- 实施
- 2023-08-28
1 Scope This document specifies the requirements for four types of flexible thermoplastic hose, textile reinforced, for compressed-air applications in the temperature range from −10 °C to +60 °C.
Plastics hoses. Textile-reinforced types for compressed-air applications. Specification
- ICS
- 23.040.70
- CCS
- 发布
- 2023-06-30
- 实施
- 2023-06-30
BS EN ISO 4641. Rubber hoses and hose assemblies for water suction and discharge. Specification
- ICS
- 23.040.70
- CCS
- 发布
- 2023-06-01
- 实施
- 2023-06-01
BS EN ISO 6224. Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification
- ICS
- 23.040.70
- CCS
- 发布
- 2023-05-16
- 实施
- 2023-05-16
This document specifies the requirements for four types of flexible thermoplastic hose, textile reinforced, for compressed-air applications in the temperature range from −10 °C to +60 °C.
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023)
- ICS
- 23.040.70
- CCS
- 发布
- 2023-05-03
- 实施
- 2023-08-31
1.1 This specification covers manually operated fueling hose reels for use with collapsible and noncollapsible hose. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The following precautionary caveat pertains only to the test methods portion, Section 12 of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Manually Operated Fueling Hose Reels
- ICS
- 23.040.70
- CCS
- 发布
- 2023-05-01
- 实施
This document specifies the requirements for four types of flexible thermoplastic hose, textile reinforced, for compressed-air applications in the temperature range from −10 °C to +60 °C.
Plastics hoses — Textile-reinforced types for compressed-air applications — Specification
- ICS
- 23.040.70
- CCS
- 发布
- 2023-04
- 实施
- 2023-04
Rubber and plastics hoses and tubing, and their assemblies — Determination of permeability to gas
- ICS
- 23.040.70
- CCS
- 发布
- 2023-04
- 实施
Rubber hoses and hose assemblies for saturated steam — Specification
- ICS
- 23.040.70
- CCS
- 发布
- 2023-04
- 实施
Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification
- ICS
- 23.040.70
- CCS
- 发布
- 2023-04
- 实施
