23.040.80 管和软管组件的密封件 标准查询与下载

DS/EN 1514-2:2005 法兰及其接头 PN 标示法兰的尺寸 第2部分：与钢制法兰一起使用的螺旋缠绕垫圈

This standard specifies the dimensions and marking of spiral wound gaskets for use in conjunction with flat face and raised face flanges complying with EN 1092-1 for PN 10, PN 16, PN 25, PN 40, PN 63 and PN 100 and PN 160 and up to and including DN 1000.

Flanges and their joints - Dimensions of PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges

BS EN 1514-2:2005 法兰及其连接件.PN-标示的法兰用衬垫的尺寸.钢法兰用螺旋形衬垫

This European Standard specifies the dimensions and marking of spiral wound gaskets for use in conjunction with flat face and raised face flanges complying with EN 1092-1 for PN 10, PN 16, PN 25, PN 40, PN 63, PN 100 and PN 160 and up to and including DN 1000. NOTE1 Dimensions of other types of gaskets for use with flanges to EN 1092-1, EN 1092-2, EN 1092-3 and EN 1092-4 are given in EN 1514-1, EN 1514-3, EN 1514-4, EN 1514-6, EN 1514-7 and EN 1514-8. NOTE2 Annex A lists information that should be supplied by the purchaser when ordering gaskets in circumstances where the choice of the gasket materials appropriate to the service is left to the supplier.

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Spiral wound gaskets for use with steel flanges

ASME B16.21-2005 管法兰用非金属平垫圈

This Standard covers types, sizes, materials, dimensions, tolerances, and markings for nonmetallic flat gaskets. These gaskets are dimensionally suitable for use with flanges described in the referenced flange standards. This Standard states values both in metric and U.S. customary units. As an exception, diameter of bolts and flange bolt holes are expressed in inch units only. These systems of units are to be regarded separately as standard. Within the text, the U.S. customary units are shown in parentheses or in separate tables. The values stated in each system are not exact equivalents; therefore, it is required that each system of units be used independently of the other. Except for diameter of bolts and flange bolt holes, combining values from the two systems constitutes nonconformance with the Standard.

Nonmetallic Flat Gaskets for Pipe Flanges

EN 1514-2:2005 法兰及其连接件.PN-标示的法兰用衬垫的尺寸.第2部分:钢法兰用螺旋形衬垫

This European Standard specifies the dimensions and marking of spiral wound gaskets for use in conjunction with flat face and raised face flanges complying with EN 1092-1 for PN 10, PN 16, PN 25, PN 40, PN 63, PN 100 and PN 160 and up to and including DN 1000. NOTE 1 Dimensions of other types of gaskets for use with flanges to EN 1092-1, EN 1092-2, EN 1092-3 and EN 10924 are given in EN 1514-1, EN 1514-3, EN 1514-4, EN 1514-6, EN 1514-7 and EN 1514-8. NOTE 2 Annex A lists information that should be supplied byThe purchaser when ordering gaskets in circumstances whereThe choice of the gasket materials appropriate toThe service is left toThe supplier.

Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges

LST EN 1514-8-2005 法兰及其接头 PN 标记法兰用垫圈的尺寸 第8部分：用于沟槽法兰的聚合物 O 型圈垫圈

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges

DIN EN 1514-8:2005 法兰及其连接件.PN标示法兰用垫圈的尺寸.第8部分:带槽法兰用聚酯O形密封圈

A standard for the dimensions of sealing rings for PN-designated flanges, on the basis of DIN 2693.#,,#

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges; German version EN 1514-8:2004

DS/EN 1514-8:2005 法兰及其接头 PN 标记法兰用垫圈的尺寸 第8部分：用于沟槽法兰的聚合物 O 型圈垫圈

This European standard specifies the dimensions of polymeric O-Ring gaskets for use with grooved flanges complying with EN 1092 for PN 10, PN 16, PN 25, PN 40. NOTE 1 Dimensions of other types of gaskets for use with flanges to EN 1092-1, EN 1092-2, EN 1092-3 and EN 1092-4 are given in EN 1514-1, EN 1514-2, EN 1514-3, EN 1514-4, prEN 1514-6 and prEN 1514-7 NOTE 2 Annex A lists information that should be supplied by the purchaser when ordering gaskets in circumstances where the choice of the gasket materials appropriate to the service is left to the supplier.

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges

NF E29-901-7*NF EN 12560-7:2004 法兰及其接头.等级标示法兰用垫圈.第7部分:与钢法兰一起使用的金属涂覆有套垫圈

Flanges and their joints - Gaskets for Class-designated flanges - Part 7 : covered metal jacketed gaskets for use with steel flanges.

DIN EN 12560-7:2004 法兰及其接头.等级标示法兰用垫圈.第7部分:与钢法兰一起使用的金属涂覆有套垫圈

This standard specifies dimensions, types, design, materials and marking requirements of covered metal jacketed gaskets.#,,#

Flanges and their joints - Gaskets for Class designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges; German version EN 12560-7:2004

LST EN 1514-7-2004 法兰及其接头 PN 标记法兰用垫片 第7部分：与钢制法兰一起使用的包覆金属包覆垫片

Flanges and their joints - Gaskets for PN-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges

LST EN 12560-7-2004 法兰及其接头 等级指定法兰用垫片 第7部分：与钢法兰一起使用的覆盖金属包覆垫片

Flanges and their joints - Gaskets for Class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges

DS/EN 12560-7:2004 法兰及其接头 等级指定法兰用垫片 第7部分：与钢法兰一起使用的覆盖金属包覆垫片

This European standard specifies the construction, dimensions and marking of covered metal jacketed gaskets for use with flanges complying with prEN 1759-1 for Class 150, Class 300, Class 600, Class 900, Class 1500 for sizes up to and including NPS 24, and for class designation 2500 up to and including NPS 12. This European Standard does not extend to covered metal jacketed based heat exchanger gaskets with pass bars or large vessel gaskets but, in the lack of a dedicated document for such gaskets, the principles set down may be applied to them.

Flanges and their joints - Gaskets for Class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges

NF T54-906:2004 塑料管道系统.用于地下无压装置的热塑性管道系统.橡胶密封环型连接件密封性的试验方法

Plastics piping systems - Thermoplastics piping systems for buried non-pressure applications - Test methods for leaktightness of elastomeric sealing ring type joints.

DIN EN 1514-7:2004 法兰及其连接件.PN标示法兰用垫圈.第7部分:与钢法兰一起使用的镀金属的有套垫圈

This standard specifies dimensions, types, design, materials and marking requirements of covered metal jacketed gaskets, for use with flanges complying with EN 1092 series.

Flanges and their joints - Gaskets for PN-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges; German version EN 1514-7:2004

DS/EN 1514-7:2004 法兰及其接头 PN 标记法兰用垫片 第7部分：与钢制法兰一起使用的包覆金属包覆垫片

This European standard specifies the construction, dimensions and marking of covered metal jacketed gaskets for use with flanges complying with prEN 1092-1 for PN 2,5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63 and PN 100 up to and including DN 900.

Flanges and their joints - Gaskets for PN-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges

LST EN 1514-6-2004 法兰及其接头 PN 标记法兰用垫圈的尺寸 第6部分：与钢制法兰一起使用的带涂层的锯齿状金属垫圈

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges

LST EN 12560-6-2004 法兰及其接头 等级指定法兰用垫片 第6部分：与钢制法兰一起使用的带涂层的锯齿状金属垫片

Flanges and their joints - Gaskets for Class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges

BS EN 12560-7:2004 法兰及其接头.分级标示法兰用垫圈.钢法兰用涂覆金属的套层垫圈

This European Standard specifies the construction, dimensions and marking of covered metal jacketed gaskets for use with flanges complying with prEN 1759-1 for Class 150, Class 300, Class 600, Class 900. Class 1 500 for sizes up to and including NPS 24, and for Class designation 2 500 up to and including NPS 12. This European Standard does not extend to covered metal jacketed based heat exchanger gaskets with pass bars or large vessel gaskets but, in the lack of a dedicated document for such gaskets, the principles set down may be applied to them. NOTE 1 Dimensions of other types of gaskets for use with flanges to prEN 1759-1, EN 1759-3 and EN 1759-4 are given in EN 12560-1, EN 12560-2, EN 12560-3, EN 12560-4, EN 12560-5 and EN 12560-6. NOTE 2 Annex A lists information that should be supplied by the purchaser when ordering gaskets in circumstances where the choice of the gasket materials appropriate to the service is left to the supplier.

Flanges and their joints - Gaskets for class-designated flanges - Covered metal jacketed gaskets for use with steel flanges

EN 12560-7:2004 法兰及其接头.等级标示法兰用垫圈.第7部分:与钢法兰一起使用的金属涂覆有套垫圈

This European Standard specifies the construction, dimensions and marking of covered metal jacketed gaskets for use with flanges complying with prEN 1759-1 for Class 150, Class 300, Class 600, Class 900.Class 1 500 for sizes up to and including NPS 24, and for Class designation 2 500 up to and including NPS 12.This European Standard does not extend to covered metal jacketed based heat exchanger gaskets with pass bars or large vessel gaskets but, in the lack of a dedicated document for such gaskets, the principles set down may be applied to them.NOTE 1 Dimensions of other types of gaskets for use with flanges to prEN 1759-1, EN 1759-3 and EN 1759-4 are given

Flanges and their joints - Gaskets for Class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges

BS EN 1514-7:2004 法兰及其连接件.PN标示法兰用垫圈的尺寸.钢法兰用涂覆金属的套层垫圈

This European Standard specifies the construction, dimensions and marking of covered metal jacketed gas-kets for use with flanges complying with EN 1092-1 for PN 2,5, PN 6, PN 10, PN 16, PN 25, PN 40, PN 63 and PN 100 up to and including DN 900. This European Standard does not extend to covered metal jacketed based heat exchanger gaskets with pass bars or large vessel gaskets but, in the lack of a dedicated document for such gaskets, the principles set down may be applied to them. NOTE1 Dimensions of other types of gaskets for use with flanges to EN 1092-1, EN 1092-2, EN 1092-3 and EN 1092-4 are given in EN 1514-1, EN 1514-2, EN 1514-3, EN 1514-4, EN 1514-6 and prEN 1514-8. NOTE 2 Annex A lists information that should be supplied by the purchaser when ordering gaskets in circumstances where the choice of the gasket materials appropriate to the service is left to the supplier.

Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Covered metal jacketed gaskets for use with steel flanges