23.060.01 阀门综合 标准查询与下载

T/WZBF 022-2022 液氧储罐根阀

本标准规定了液氧储罐根阀的定义、结构型式、参数、要求、试验方法、检验规则、标志、包装及贮运要求,适用于公称压力PN100~PN420、公称尺寸DN50~250，压力等级Class600 ~Class2500、公称尺寸NPS2~NPS10，介质的最低工作温度为-196℃的法兰连接的液氧储罐根阀。

Root valve of liquid oxygen storage tank

EN ISO 10497:2022 阀门试验.耐火试验要求

This document specifies fire type-testing requirements and a fire type-test method for soft- and metal-seated isolation valves with one or more obturators. It is not applicable to the testing requirements for valve actuators other than manually operated gearboxes or similar mechanisms when these form part of the normal valve assembly. Other types of valve actuators (e.g. electrical, pneumatic or hydraulic) can need special protection to operate in the environment considered in this valve test, and the fire testing of such actuators is outside the scope of this document. This document specifies the measurement and assessment criteria for: a) through-seat leakage; b) external leakage; c) cavity overpressure relief of double-seated valves; d) operability. This document specifies the rules whereby the fire-type testing qualification for a valve can be extended to untested sizes, pressure ratings and materials of construction of the same basic design type. Fire test reports of valves tested according to previous editions of this document are acceptable when submitted together with the full and compliant fire test report as per 6.7 of the edition under which it was tested. Any data missing as required from 6.7 within the fire test report are accepted or rejected at the purchaser’s discretion. NOTE For the purposes of this document, the terms “fire type-test” and “fire test” are synonymous.

Testing of valves - Fire type-testing requirements (ISO 10497:2022)

ISO 10497:2022 阀门试验.防火试验要求

Testing of valves — Fire type-testing requirements

JB/T 14310-2022 阀门压力试验装置 技术规范

Technical Specifications for Valve Pressure Test Devices

EN ISO 23632:2022 工业阀门.阀门的设计验证试验

Le présent document spécifie les exigences et les critères d’acceptation pour les essais de type, conformes aux conditions de conception, des robinets à tournant sphérique métalliques et robinets à papillon métalliques utilisés pour des services de sectionnement pour toutes les applications industrielles, et sert à valider la conception des produits sur 205 cycles. Le présent document exclut les essais de dispositifs de sécurité, de robinets de régulation, de robinets en matériaux thermoplastiques, et des robinets pour l’alimentation en eau destinée à la consommation humaine et en eaux usées (par exemple la série EN 1074). Le présent document définit la procédure permettant d’étendre la qualification de l’appareil de robinetterie soumis à l’essai à des désignations de dimensions et de pression non soumises à l’essai de la même gamme de produits. Cet essai de type a pour objet de valider la performance de siège pour la relation pression/température précisée par le fabricant, qui figure dans la documentation technique du produit donnée par le fabricant. Cet essai de type vérifie les exigences de couple et le couple de manœuvre maximale admissible (MAST), tels que donnés dans la documentation technique du fabricant. Cet essai de type valide la durabilité de la performance de siège et le couple de manœuvre grâce à des cycles mécaniques et thermiques.

Industrial valves - Design validation-testing of valves (ISO 23632:2021)

T/CAMER 017-2022 阀门产品再制造 通用技术规范

描述了阀门产品再制造安全环保要求、通用要求； 详细描述了阀门产品再制造技术要求，包括：阀门产品再制造流程、再制造性能检测及评估、 阀门产品再制造总体方案的制定 、 拆卸与分类、 清洗与检查 、 阀门再制造设计、 阀门零部件再制造工艺方案制定、 组装与调试 ； 规定了再制造阀门的试验与检验； 标志、包装、储存和运输等。 

Remanufacturing-General technical Specificationg for Valves produdcts

22/30449637 DC BS EN ISO 5211:2017 AMD1 工业阀门 部分回转执行器附件

BS EN ISO 5211:2017 AMD1. Industrial valves. Part-turn actuator attachments

22/30449633 DC BS EN ISO 5210:2017 AMD1 工业阀门 多回转阀门执行器附件

BS EN ISO 5210:2017 AMD1. Industrial valves. Multi-turn valve actuator attachments

T/CASME 17-2022 气动薄膜单座调节阀

本文件规定了气动薄膜单座调节阀的术语和定义、分类及基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Pneumatic diaphragm single seat regulating valve

T/CASME 16-2022 工业过程控制用直行程电动调节阀

本文件规定了工业过程控制用直行程电动调节阀的术语和定义、分类及基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Straight stroke electrical control valves for industrial-process control systems

DB41/T 901-2022 阀门密封面堆焊焊接操作人员考核规则

Evaluation rules for surfacing welding operators of valve sealing surface

T/NXJX 028-2022 控制阀检维修技术规范

本文件规定了气动、电动控制阀下线与拆检过程要求、维修过程要求、装配、附件连接与调校、检测、防腐，包装、运输、贮存，上线等检维修全过程。

Technical specification for control valve servicing

BS EN ISO 28921-1:2022 工业阀门 适用于低温应用的隔热阀 设计、制造和生产测试

1   Scope This document specifies requirements for design, dimensions, material, fabrication and production testing of gate, globe, ball/plug and butterfly valve design types used as isolation valves and check valves for low-temperature applications. This document is applicable to isolation valves for use in low and cryogenic temperature service where the design low-temperature service is -50 °C down to –196 °C. This document does not apply to valves for cryogenic services, designed in accordance with ISO 21011, used with cryogenic vessels. Where the requirements of this document vary from those given in the valve product standards, the requirements of this document apply. This document is applicable to valves with body, bonnet, bonnet extension or cover made of metallic materials. This document is applicable to: — valves of nominal sizes DN : 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400; 450; 500; 600; 650; 700; 750; 800; 850; 900; 950; 1 000; 1 050; 1 200; 1 350; 1 400; 1 500; 1 600; 1 650; 1 800, — corresponding to nominal pipe sizes NPS : ⅜; ½; ¾; 1; 1 ¼; 1 ½; 2; 2 ½; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 26; 28; 30; 32; 34; 36; 38; 40; 42; 48; 54; 56; 60; 64; 66; 72,

Industrial valves. Isolating valves for low-temperature applications. Design, manufacturing and production testing

T/WZBF 015-2022 高温快开阀

本文件规定了高温快开阀的术语和定义、结构型式、技术要求、检验与试验方法、检验规则、标志及供货要求。

High temperature quick opening valve

T/WZBF 014-2022 气动快开截止阀

本标准规定了气动快开截止阀的术语和定义、结构型式、技术要求、检验与试验方法、检验规则、标志及供货要求。

Pneumatic quick opening globe valve

T/WZBF 018-2022 阀门零部件 填料压盖、填料压套和填料压板

本标准规定了填料压盖、填料压套和填料压板的结构型式、基本尺寸、材料和要求。

Components of valves—Gland,pressure sleeves and plates

T/WZBF 016-2022 阀门零部件 隔环

本标准规定了阀门填料函用隔环形式、尺寸和要求。

Components of valves—Lantern ring

T/WZBF 019-2022 阀门零部件 顶心

本标准规定了顶心的结构形式、尺寸和技术要求。

Components of valves—Top core

T/WZBF 021-2022 阀门零部件 轴承压盖

本标准规定了轴承压盖的结构形式、尺寸和技术要求。

Components of valves-Bearing glands

T/WZBF 020-2022 阀门零部件 上密封座

本标准规定了上密封座的结构形式、尺寸和技术要求。

Components of valves—Back seats