23.060.10 球阀 标准查询与下载
共找到 232 条与 球阀 相关的标准，共 16 页
本标准适用于铁路车辆空气煞车装置之角旋塞（以下简称角旋塞）。
Angle Cocks for Railway Rolling Stock
- ICS
- 23.060.10
- CCS
- 发布
- 1995-11-30
- 实施
- 1995-11-30
本标准适用于铁路车辆空气煞车装置用之排泄旋塞（以下简称排泄旋塞）。
Drain Cocks for Railway Rolling Stock
- ICS
- 23.060.10
- CCS
- 发布
- 1995-11-30
- 实施
- 1995-11-30
本标准适用于铁路车辆用带侧孔之切断旋塞（以下简称旋塞）。
Cut-out Cocks with Side Vent for Railway Rolling Stock
- ICS
- 23.060.10
- CCS
- 发布
- 1995-11-30
- 实施
- 1995-11-30
本标准适用于铁路车辆空气煞车装置用之切断旋塞（以下简称旋塞）。
Cut-out Cocks for Railway Rolling Stock
- ICS
- 23.060.10
- CCS
- 发布
- 1995-11-30
- 实施
- 1995-11-30
本标准适用于铁路车辆之空气煞车装置用三通旋塞（以下简称旋塞）。
Three-way Cocks for Railway Rolling Stock
- ICS
- 23.060.10
- CCS
- 发布
- 1995-11-30
- 实施
- 1995-11-30
Cast steel flanged valves
- ICS
- 23.060.10
- CCS
- J15;J16
- 发布
- 1995-07-01
- 实施
- 1995-07-01
本标准适用于铸铁凸缘型球形阀（10 kgf∕cm2）（以下简称阀），另本标准中｛｝内之值系国际单位制（SI），并记参考。
Cast Iron Flanged Globe Valves (10kgf/c㎡)
- ICS
- 23.060.10
- CCS
- 发布
- 1993-01-28
- 实施
- 1993-01-28
本标准适用于标称压力 10kgf∕cm2 之球状石墨铸铁螺纹口球形阀（以下简称阀）。备考：｛ ｝ 内之数值及单位系国际单位制（SI）。
Nodular Graphite Iron Screwed Globe Valves (10 kgf/c㎡)
- ICS
- 23.060.10
- CCS
- 发布
- 1991-04-23
- 实施
- 1991-04-23
本标准适用于标称压力 10kgf∕cm2 之球状石墨铸铁凸缘球形阀（以下简称阀）。备考：｛ ｝ 内之数值及单位系国际单位制（SI）。
Nodular Graphite Iron Flanged Globe Valves (10 kgf/c㎡)
- ICS
- 23.060.10
- CCS
- 发布
- 1991-04-23
- 实施
- 1991-04-23
Specifies construction and performance requirements and test methods for valves, intended for operation in irrigation systems, with water at temperatures not exceeding 50 鳦, which may contain fertilizers and chemicals of the types and concentration used in agriculture. Applies to valves of 15 mm diameter or greater.
Irrigation equipment; hydraulically operated irrigation valves
- ICS
- 23.060.10
- CCS
- B91;J16
- 发布
- 1990-12
- 实施
- 1990-12-01
Gas stopvalves rated for pressures up to 4 bar; requirements and acceptance testing
- ICS
- 23.060.10
- CCS
- Q82;J16
- 发布
- 1990-06
- 实施
Specifies a method for testing the fatigue strength and performance of thermoplastic valves incorporated in a valve assembly with its obturator mechanism under pressure. Repeated opening and closing shall be performed for as many cycles and using the torque as specified by the particular product standard.
Thermoplastics valves; fatigue strength; test method
- ICS
- 23.060.10
- CCS
- J16
- 发布
- 1989-07
- 实施
- 1989-07-01
This standard lays down the most important dimensions and materials for plate valves for displacement compressors with a motor capacity of more than 100 kW to rationalize manufacturing, stock holding and installation into compressors. There are shown modes of installation to prevent the exchange of suction valves with discharge valves as well as discharge valves with suction valves or the installation of suction valves as well as discharge valves turned up a 180 degree.#,,#
Plate valves for displacement compressors; suction valves, discharge valves; main dimensions, materials, installation
- ICS
- 23.060.10
- CCS
- J16
- 发布
- 1989-07
- 实施
本标准适用于船用青铜球刑阀，其标称使用压力为 5 kgf/cm2 者。
Bronze Globe Valves for Marine Use（5ｋｇｆ/ｃ㎡）
- ICS
- 23.060.10
- CCS
- 发布
- 1989-04-13
- 实施
- 1989-04-13
本标准适用于青铜螺纹口球形阀（10 kgf∕cm2）（以下简称阀），本标准中｛｝内之值系国际单位制（SI），并记供参考。
Bronze Screwed Globe Valves (10kgf/c㎡)
- ICS
- 23.060.10
- CCS
- 发布
- 1988-07-14
- 实施
- 1988-07-14
本标准适用于船用青铜标称压力 5 kgf/cm2 管套帽型球形阀 (以下简称为阀)。
Bronze Globe Valves for Marine Use (Union Bonnet Type) (5 ｋｇｆ/ｃ㎡)
- ICS
- 23.060.10
- CCS
- 发布
- 1988-04-21
- 实施
- 1988-04-21
本标准适用于船用标称压力为 5 kgf∕cm2 之铸铁升程止回球形阀。
Cast Iron Check Globe Valves for Marine Use ( 5 ｋｇｆ/ｃ㎡ )
- ICS
- 23.060.10
- CCS
- 发布
- 1988-04-21
- 实施
- 1988-04-21
本标准适用于船用铸铁标称压力 5 kgf∕cm2 之螺杆止回球形阀。
Cast Iron-down Check Globe Valves for Marine Use (5 ｋｇｆ/ｃ㎡)
- ICS
- 23.060.10
- CCS
- 发布
- 1988-04-21
- 实施
- 1988-04-21
