23.100.01 流体动力系统综合 标准查询与下载

BS EN ISO 4414:2010 气动液压 系统及其部件的一般规则和安全要求

Pneumatic fluid power. General rules and safety requirements for systems and their components (CD-ROM)

BS EN ISO 4413:2010 液压流体动力 系统及其部件的一般规则和安全要求

Hydraulic fluid power. General rules and safety requirements for systems and their components (CD-ROM)

DIN EN ISO 4414:2011 气压传动.系统及其部件的一般规则和安全要求(ISO 4414-2010);德文版本EN ISO 4414-2010

This International standard specifies general rules and safety requirements for pneumatic fluid power systems and components used on machinery as defined by ISO 12100:2010,3.1. It deals with all significant hazards associated with pneumatic fluid power systems and specifies the principles to apply in order to avoid those hazards when the systems are put to their intended use. NOTE 1 See Clause 4 and Annex A. The significant hazard noise is incompletely dealt with in this International Standard. NOET 2 Noise emission depends especially on the installation of pneumatic components or systems into machinery. This International Standard applies to the design, construction and modification of systems and their components, also taking into account the following aspects: a) assembly; b) installation; c) adjustment; d) uninterrupted system operation; e) ease and economy of maintenance and cleaning; f) reliable operation in all intended uses; g) energy efficiency; and h) environment. This International Standard does not apply to air compressors and the systems associated with air distribution as typically installed in a factory, including gas bottles and receivers.

Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010); German version EN ISO 4414:2010

DIN EN ISO 4413:2011 液压传动.系统及其部件的一般规则和安全要求(ISO 4413-2010);德文版本EN ISO 4413-2010

This International standard specifies general rules and safe requirements for the hydraulic fluid power systems and components used on machinery as defined by ISO 12100:2010,3.1. It deals with all significant hazards associated with hydraulic fluid power systems and specifies the principles to apply in order to avoid those hazards when the systems are put to their intended use. NOTE 1 See Clause 4 and Annex A. The significant hazard noise is incompletely dealt with in this International Standard. NOET 2 Noise emission depends especially on the installation of pneumatic components or systems into machinery. This International Standard applies to the design, construction and modification of systems and their components, also taking into account the following aspects: a) assembly; b) installation; c) adjustment; d) uninterrupted system operation; e) ease and economy of maintenance and cleaning; f) reliable operation in all intended uses; g) energy efficiency; and h) environment.

Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010); German version EN ISO 4413:2010

LST EN ISO 4414:2011 气动流体动力 系统及其组件的一般规则和安全要求（ISO 4414:2010）

Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010)

LST EN ISO 4413:2011 液压流体动力 系统及其组件的一般规则和安全要求（ISO 4413:2010）

Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010)

JIS B 8672-4:2011 气压液压传动.通过测试评定元件的可靠度.第4部分:压力调节器

Pneumatic fluid power -- Assessment of component reliability by testing -- Part 4: Pressure regulators

JIS B 8672-1:2011 气动液压传动.利用测试的组件可靠性评估.第1部分:一般规程

Pneumatic fluid power -- Assessment of component reliability by testing -- Part 1: General procedures

DS/EN ISO 4413:2011 液压流体动力系统及其部件的一般规则和安全要求

This Standard provides general rules relating to hydraulic systems on machinery used in industrial manufacturing processes. It is intended as a guide for both suppliers and purchasers, with a view to ensuring: a) safety; b) uninterrupted system operation; c) ease and economy of maintenance; d) long life of the system.

Hydraulic fluid power - General rules and safety requirements for systems and their components

DS/EN ISO 4414:2011 气动流体动力系统及其组件的一般规则和安全要求

This Standard provides general rules relating to pneumatic systems used in industrial manufacturing processes. It is intended as a guide for both suppliers and purchasers, with a view to ensuring: a) safety; b) uninterrupted system operation; c) ease and economy of maintenance; d) long life of the system. This Standard does not apply to air compressors and the systems associated with air distribution as typically installed in a factory.

Pneumatic fluid power - General rules and safety requirements for systems and their components

ANSI/ABYC H-30-2011 液压系统

This standard is a guide for the design, construction, installation, operation, and control of hydraulic components used to transmit force.

Hydraulic Systems

ISO 4413:2010 液压传动.系统及其组件用安全性要求和一般规则

This International Standard specifies general rules and safety requirements for hydraulic fluid power systems and components used on machinery as defined by ISO 12100:2010, 3.1. It deals with all significant hazards associated with hydraulic fluid power systems and specifies the principles to apply in order to avoid those hazards when the systems are put to their intended use. NOTE 1 See Clause 4 and Annex A. The significant hazard noise is incompletely dealt with in this International Standard. NOTE 2 Noise emission depends especially on the installation of hydraulic components or systems into machinery. This International Standard applies to the design, construction and modification of systems and their components, also taking into account the following aspects: a)assembly; b)installation; c)adjustment; d)uninterrupted system operation; e)ease and economy of maintenance and cleaning; f)reliable operation in all intended uses; g)energy efficiency; and h)environment.

Hydraulic fluid power - General rules and safety requirements for systems and their components

ISO 4414:2010 气流动力.系统与其组件总则与安全要求

This International Standard specifies general rules and safety requirements for pneumatic fluid power systems and components used on machinery as defined by ISO 12100:2010, 3.1. It deals with all significant hazards associated with pneumatic fluid power systems and specifies principles to apply in order to avoid those hazards when the systems are put to their intended use. NOTE 1 See Clause 4 and Annex A. The significant hazard noise is incompletely dealt with in this International Standard. NOTE 2 Noise emission depends especially on the installation of pneumatic components or systems into machinery. This International Standard applies to the design, construction and modification of systems and their components, also taking into account the following aspects: a) assembly; b) installation; c) adjustment; d) uninterrupted system operation; e) ease and economy of maintenance and cleaning; f) reliable operation in all intended uses; g) energy efficiency; and h) environment. This International Standard does not apply to air compressors and the systems associated with air distribution as typically installed in a factory, including gas bottles and receivers.

Pneumatic fluid power - General rules and safety requirements for systems and their components

EN ISO 4413:2010 液压流体动力.通用规则和安全要求系统及其组件(ISO 4413:2010)

Diese Internationale Norm enthält allgemeine Regeln und sicherheitstechnische Anforderungen an Hydraulikanlagen und deren Bauteile in Maschinen nach ISO 12100-1:2010, 3.1. Sie benennt Gefährdungen in Verbindung mit Hydraulikanlagen und legt Prinzipien fest, die anzuwenden sind, um jene Gefährdungen bei der bestimmungsgemäßen Verwendung der Anlage zu vermeiden. ANMERKUNG 1 Siehe Abschnitt 4 und Anhang A. Die wesentliche Gefährdung Lärm wird in dieser Internationalen Norm unvollständig behandelt. ANMERKUNG 2 Die Gefährdung Lärm hängt insbesondere von dem Einbau der Hydraulikbauteile oder -anlagen in die Maschine ab. Diese Internationale Norm gilt für die Konstruktion, den Bau und die Änderung von Anlagen und deren Bauteilen unter weiterer Berücksichtigung der folgenden Aspekte: a) Montage; b) Einbau; c) Einrichtung; d) störungsfreier Betrieb der Anlage; e) einfache und wirtschaftliche Instandhaltung und Reinigung; f) zuverlässiger Betrieb bei allen vorgesehenen Anwendungen; g) Energieeffizienz; und h) Umwelt.

Hydraulic fluid power - General rules and safety requirements for systems and their components

ASME EA-4G-2010 ASME EA-4,压缩空气系统能量评估指导

STANDARDS Guidance for ASME EA-4, Energy Assessment for Compressed Air Systems [ANSI designation: ASME TR EA-4G-2010] Guidance for ASME EA-4, Energy Assessment for Compressed Air Systems [ANSI designation: ASME TR EA-4G-2010] EA-4G - 2010 Share ASME Topics Energy Efficiency Format Member Price List Price Availability Order No. Qty Print-Book $43.00 $43.00 Ships in 3-5 Days E14510 1 Add to cart Digital Book $43.00 $43.00 Immediately E1451Q 1 Add to cart Important information regarding ASME PDFsDescription This guidance document provides an application guide on how to utilize ASME EA-4, Energy Assessment for Compressed Air Systems. This guidance document provides background and supporting information to assist in carrying out the standard. ASME EA-4 does not provide guidance on how to perform a compressed air systems energy assessment, but sets the requirements that need to be performed during the assessment. ASME EA-4 was written in a form suitable for a standard, with concise text and without examples or explanations. This document was developed to be used in conjunction with the standard to give basic guidance on how to fulfill the requirements of the standard. This document is only a guide, it does not set any new requirements, and ASME EA-4 can be used with or without this document.

Guidance for ASME EA-4, Energy Assessment for Compressed Air Systems [ANSI designation: ASME TR EA-4G-2010] (EA-4G - 2010)

ASME EA-4-2010 压缩空气系统用能量评估

This document covers compressed air systems, which are defined as a group of subsystems comprised of integrated sets of components, including air compressors, treatment equipment, controls, piping, pneumatic tools, pneumatically powered machinery, and process applications utilizing compressed air. The objective is consistent, reliable, and efficient delivery of energy to manufacturing equipment and processes.

Energy Assessment for Compressed Air Systems

NF C55-497:2009 径向和轴向液压机.从模型到原型的性能转换方法

Hydraulic machines, radial and axial - Performance conversion method from model to prototype.

DIN EN 982:2009 机械安全 液体动力系统及其部件用安全要求 液压学

This standard applies to hydraulic systems and their components on machinery. It identifies hazards and factors which affect the safety of systems and their components when they are put to their intended use. The principles specified apply to the design, construction and modification of new systems and their components and aspects of use including: -- Assembly -- Installation -- Adjustment -- Operation -- Cleaning -- Maintenance. Components are covered in the standard but only to the extent that safety requirements are given to allow the components to be safely integrated into a system's design. The standard applies to systems and their components on machinery that are manufactured after the date of the adoption of this standard.

Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics (includes Amendment A1:2008); English version of DIN EN 982:2009-06

SAE J1927-2009 液压软管组件用累积损坏分析

This SAE Information Report is intended to provide the hydraulic system analyst with a procedure which will assist in the selection and use of high-pressure wire reinforced hydraulic hose assemblies. Many construction, agricultural, industrial or commercial equipment systems utilize hydraulic hose assemblies that are subjected to irregular cyclic pressure variations (cannot be approximated by a constant amplitude pressure cycle). This document relates damage done by pressure cycles with the pressure-life performance curve for the hose assembly being evaluated, using a linear damage rule to predict fatigue life similar to that used for predicting metal fatigue life. More detailed information on the subject may be found in SAE Paper No. 880713. The accuracy of cumulative damage calculations is directly related to proper measurement of the service pressure history and pressure-life performance for the hose assembly being evaluated. Final selection of a hose assembly must also consider installation and maintenance as noted in SAE J1273.

Cumulative Damage Analysis for Hydraulic Hose Assemblies

ISO/TR 19972-1:2009 液压传动.液压部件可靠性评估的方法.第1部分:通用程序和计算方法

Hydraulic fluid power - Methods to assess the reliability of hydraulic components - Part 1: General procedures and calculation method