23.100.10 泵和马达 标准查询与下载

JB/T 5920-2011 液压内曲线低速大转矩马达安装法兰和轴伸尺寸

本标准规定了液压内曲线低速大转矩马达的多边形（包括圆形）安装法兰和渐开线花键轴伸尺寸。 本标准适用于额定压力为16MPa～25MPa，排量为0.25L/r～25L/r的内曲线液压马达。

Interior curve hydraulic motor.Dimension series for mounting flanges and shaft ends

JB/T 7170-2011 预供油油泵

本标准规定了气动和电动预供油油泵的型式、型号与基本参数、技术要求、检验方法、检验规则和标志、包装、运输与贮存。 本标准适用于在柴油机等机械起动前，为其润滑系统输送一定压力机油的预供油油泵。

priming oil pumps

JB/T 5126-2011 起动用叶片式气动马达

本标准规定了起动用叶片式气动马达的型号与基本参数、技术要求、检验方法、检验规则和标志、包装、运输与贮存。 本标准适用于大功率柴油机及石油、矿山机械等设备起动用的叶片式气动马达（以下简称产品）。

Pneumatic vane motors for starting

GSO ISO 8426:2010 液压油容量 正排量泵和马达 导出容量的确定

ISO 8426:2008 specifies the methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors under steady-state conditions and at defined, continuous shaft rotational frequencies. Units can be tested as a positive displacement pump, with mechanical energy applied to the shaft and hydraulic energy obtained at the outlet fluid connection, or as a motor, with hydraulic energy supplied to the inlet fluid connection and mechanical energy obtained at the shaft.

Hydraulic fluid power -- Positive displacement pumps and motors -- Determination of derived capacity

JIS B 8382:2010 液压传动.容积式泵和电动机.推导容积的测定

Hydraulic fluid power -- Positive displacement pumps and motors -- Determination of derived capacity

JB/T 10206-2010 摆线液压马达

本标准规定了摆线液压马达(以下简称马达）的结构型式、基本参数、技术要求、试验方法、检验规则和标志、包装。 本标准适用于以液压油或性能相当的其他矿物油为工作介质的马达。

Cycloid hydraulic motor

JB/T 8728-2010 低速大转矩液压马达

本标准规定了曲轴连杆径向柱塞马达、曲轴无连杆径向柱塞马达、曲轴摆缸径向柱塞马达、内曲线径向柱塞马达、径向钢球马达（内曲线径向球塞式马达）、双斜盘轴向柱塞马达等六种低速大转矩液压马达的结构类型、基本参数、技术要求、试验方法、检验规则和标志、包装。 本标准适用于以液压油或性能相当的其他矿物油为工作介质的上述低速大转矩液压马达。其他结构类型的低速大转矩液压马达可参照使用。

Low speed high torque hydraulic motor

KS B 6861-2009 涡轮分子泵.验收试验方法

이 표준은 터보 분자 펌프 및 터보 분자 펌프의 작동 범위를 고배압, 고배기량으로 확장시킨

Turbo molecular pumps－Acceptance test code

JIS B 8397-2:2008 液压传动.马达特性的测定.第2部分:起动性

この規格は，回転式抽圧モータのん動特性を決定するための二つの方桧について規定する。それは，一定トルク法(箇条6参照)と一定圧カ法(箇条7参照)という頭似の方法であるが。得られた結果は同等であることから。どちらが優位としンうことはない。

Hydraulic fluid power -- Determination of characteristics of motors -- Part 2: Startability

JIS B 8397-1:2008 液压传动.马达特性的测定.第1部分:在恒低速和恒压下

この規格は，定容量形及ぴ可変容量形の回転形油圧モータの低速特性を決定する方法について規定する。油圧モータの安定した連統的なトルク出力に重大な影響をもつ振動カ溌生したり，油圧モータの接続されているシステムに影響を及ぼしたりするような低速での特性を決定する方法にも適用できる。

Hydraulic fluid power -- Determination of characteristics of motors -- Part 1: At constant low speed and constant pressure

BS ISO 8426:2008 液压流体动力.容积式泵和电动机.推导容积的测定

This International Standard specifies the methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors under steady-state conditions and at defined, continuous shaft rotational frequencies. Units can be tested as a positive displacement pump, with mechanical energy applied to the shaft and hydraulic energy obtained at the outlet fluid connection, or as a motor, with hydraulic energy supplied to the inlet fluid connection and mechanical energy obtained at the shaft. NOTE Measurement accuracy is divided into three classes A, B and C, which are explained in Annex A.

Hydraulic fluid power - Positive displacement pumps and motors - Determination of derived capacity

JB/T 10829-2008 液压马达

本标准规定了液压轴向柱塞马达(以下简称柱塞马达)、外啮合渐开线齿轮马达(以下简称齿轮马达)和叶片马达的术语和定义、基本参数、技术要求、试验方法、检验规则、标志和包装等要求。 本标准适用于以液压油液或性能相当的其他液体为工作介质，额定压力≤42MPa的上述三类液压马达。

Hydraulic fluid power.Hydraulic motors

ISO 8426:2008 液压传动.容积式泵和电动机.推导容积的测定

This International Standard specifies the methods of determining the derived capacity of hydraulic fluid power positive displacement pumps and motors under steady-state conditions and at defined, continuous shaft rotational frequencies. Units can be tested as a positive displacement pump, with mechanical energy applied to the shaft and hydraulic energy obtained at the outlet fluid connection, or as a motor, with hydraulic energy supplied to the inlet fluid connection and mechanical energy obtained at the shaft. NOTE Measurement accuracy is divided into three classes A, B and C, which are explained in Annex A.

Hydraulic fluid power - Positive displacement pumps and motors - Determination of derived capacity

KS B 0701-2007(2012) 圆柱形轴端

Cylindrical shaft ends

NF E48-380:2007 液压流体动力.容积式泵、电动机和整体式传动装置.基本稳定状态性能的测试和呈现方法

Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance.

BS ISO 4409:2007 液压流体传动.变容真空泵、马达和整体传动装置.测试和呈现基本稳态态性能的方法

This International Standard specifies methods for determining the performance and efficiency of hydraulic fluid power positive displacement pumps, motors and integral transmissions. It applies to components having continuously rotating shafts. This International Standard specifies the requirements for test installations, test procedures under steadystate conditions and the presentation of test results.

Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance

ISO 4409:2007 液压传动.容积式泵、马达和整体式传动装置.测试和呈现基本稳态性能的方法

This International Standard specifies methods for determining the performance and efficiency of hydraulic fluid power positive displacement pumps, motors and integral transmissions. It applies to components having continuously rotating shafts. This International Standard specifies the requirements for test installations, test procedures under steadystate conditions and the presentation of test results.

Hydraulic fluid power - Positive-displacement pumps, motors and integral transmissions - Methods of testing and presenting basic steady state performance

JB/T 7554-2007 手动超高压油泵

本标准规定了手动超高压油泵（以下简称高压泵）的型式、主要尺寸、基本参数、技术要求、试验方法、检验规则、标志、包装及贮存等。 本标准规定的高压油泵适用于作液压过盈联结的拆装，液压螺栓预紧器、液力螺母、液压千斤顶、液压调正器、压力元件标定，高压容器试压，静压装置等压力液，其工作介质为粘度等级N32液压油。 工作温度-20℃～+80℃。

Manuol super-high-prossure oil pump

JB/T 7737-2006 活塞式和叶片式气动马达

本标准规定了活塞式和叶片式气动马达的型式与基本参数、技术要求、检验方法、检验规则、标志、包装、运输及贮存。 本标准适用于活塞式和叶片式气动马达。不适用于带减速机构的气动马达。

Piston and vane pneumatic motors

JB/T 6948-2006 减速气动马达

本标准规定了减速气动马达的型式与基本参数、技术要求、检验方法、检验规则及标志、包装、运输和贮存。 本标准适用于JB/T 6502或JB/T 8853规定的减速器与JB/T 7737规定的气动马达所组成的减速气动马达。

Pneumatic decelerating motors