23.100.60 过滤器、密封垫和流体杂质 标准查询与下载

ISO/TR 4808:2021 液压传动.颗粒计数和过滤器试验数据的插值方法

Hydraulic fluid power - Interpolation method for particle count and filter test data

DS/ISO 4406:2021 液压流体动力“流体”编码固体颗粒污染程度的方法

Hydraulic fluid power – Fluids – Method for coding the level of contamination by solid particles

NF E48-663:2021 液压传动. 液体自动颗粒计数器的校准

Domaine d'applicationLe présent document spécifie des modes opératoires portant sur les aspects suivants :a) l'étalonnage dimensionnel primaire pour des tailles de particules supérieures ou égales à 1 micron m (c) , la résolution du capteur et les performances de comptage des com

Hydraulic fluid power - Calibration of automatic particle counters for liquids

BS ISO 4406:2021 液压传动 油液 固体颗粒污染等级代码法

Hydraulic fluid power. Fluids. Method for coding the level of contamination by solid particles

ISO 4406:2021 液压传动. 油液. 固体颗粒污染等级代号法

This document specifies the code to be used in defining the quantity of solid particles in the fluid used in a given hydraulic fluid power system.

Hydraulic fluid power - Fluids - Method for coding the level of contamination by solid particles

JC/T 2052-2020 辊压法无石棉纤维垫片材料

本标准规定了辊压法无石棉纤维垫片材料（以下简称"垫片材料"）的分类和标记、要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于以不含有石棉成分的纤维为主要增强材料、以弹性体为粘合剂和辅助增强材料，再添加其他填料，经辊压而制成的用于制作密封垫片的板材。用这种板材制成的密封垫片也可参照执行。

Compressed non-asbestos fibre gasket materials

JC/T 2053-2020 非金属密封填料

Non-metal sealing packing

BS ISO 11171:2020 液压传动. 液体自动粒子计数器的校正

Hydraulic fluid power. Calibration of automatic particle counters for liquids

KS I ISO 4405-2020 液压流体动力 流体污染 重量法测定颗粒污染

Hydraulic fluid power－Fluid contamination－Determination of particulate contamination by the gravimetric method

KS I ISO 16386-2020 ISO流体粉末颗粒计数变化的影响 污染控制和过滤器测试标准

Impact of changes in ISO fluid power particle counting－Contamination control and filter test standards

KS I ISO 4021-2020 液压流体动力 颗粒污染物分析 从操作系统管路中提取流体样本

Hydraulic fluid power－Particulate contamination analysis－Extraction of fluid samples from lines of an operating system

KS I ISO 18413-2020 液压流体动力 零部件清洁度 污染物收集、分析和数据报告相关的检验文件和原则

Hydraulic fluid power－Cleanliness of parts and components－Inspection document and principles related to contaminant collection, analysis and data reporting

KS I ISO 2943-2020 液压流体动力 过滤元件 材料与流体相容性验证

Hydraulic fluid power－Filter elements－Verification of material compatibility with fluids

KS I ISO 2942-2020 液压流体动力 过滤元件 制造完整性验证和第一泡点测定

Hydraulic fluid power－Filter elements－Verification of fabrication integrity and determination of the first bubble point

KS I ISO 16431-2020 液压流体动力 组装系统 清洁度验证

Hydraulic fluid power－Assembled systems－Verification of cleanliness

KS I ISO 10949-2020 液压流体动力 部件清洁度 实现和控制部件从制造到安装的清洁度指南

Hydraulic fluid power－Component cleanliness－Guidelines for achieving and controlling cleanliness of components from manufacture to installation

ASTM D7898-14(2020) 润滑和液压过滤器碎片分析的标准实践

1.1 This practice is intended to cover the extraction, analysis, and information management pertaining to visible wear debris collected from oil system filters or debris retention screens. Further, it is intended that this practice be a practical reference for those involved in FDA. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery

ISO 11171:2020 液压传动. 液体自动颗粒计数器的校准

Hydraulic fluid power - Calibration of automatic particle counters for liquids

ASTM F104-11(2020) 非金属垫片材料标准分类系统

1.1 This classification system2 provides a means for specifying or describing pertinent properties of commercial nonmetallic gasket materials. Materials composed of asbestos, cork, cellulose, and other organic or inorganic materials in combination with various binders or impregnants are included. Materials normally classified as rubber compounds are not included, since they are covered in Classification D2000. Gasket coatings are not covered, since details thereof are intended to be given on engineering drawings or in separate specifications. Facing materials for laminate composite gasket materials (LCGM) are included in Classification System F104. Assembled LCGMs are covered in Classification F868. 1.2 Since all of the properties that contribute to gasket performance are not included, use of the classification system as a basis for selecting materials is limited. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification System for Nonmetallic Gasket Materials

KS B ISO 16889-2019 液压流体动力 过滤器 评价过滤元件过滤性能的多通道方法

Hydraulic fluid power — Filters — Multi-pass method for evaluating filtration performance of a filter element