23.100.99 其他流体动力系统部件 标准查询与下载

BS ISO 6301-1:2009 气动流体动力.压缩空气润滑器.包括在供应商的资料和产品标识要求中的主要特性

Pneumatic fluid power - Compressed-air lubricators - Main characteristics to be included in supplier's literature and product-marking requirements

NF E49-320-1:2009 气压流体动力.压缩空气润滑器.第1部分:供应商资料中包含的主要特性和产品标记要求

Pneumatic fluid power - Compressed-air lubricators - Part 1 : main characteristics to be included in supplier's literature and product-marking requirements.

JIS B 8378-2:2009 气液动力.压缩空气润滑器.第2部分:列入供应商资料中的产品主要特性的测定试验方法

This Standard specifies the test methods to determine the main characteristics of compressed-air lubricators specified in JIS B 8378-1, which are to be included in supplier's literature. This Standard can be applied to: - facilitate the comparison of lubricators by standardizing test mehtods; - assist in the proper application of lubricators in compressed-air systems. The tests specified are intended to allow comparison between the different types of lubricators; they are not production tests to be carried out on each lubricator manufactured. NOTE: The International Standard corresponding to this Standard and the sym¬bol of degree of correspondence are as follows: ISO 6301-2: 2006 Pneumatic fluid power-Compressed-air lubricators Part 2: Test methods to determine the main characteristics to be included in supplier's literature (MOD) The symbols which denote the degree of correspondence in the contents between the relevant International Standard and JIS are IDT (identical), MOD (modified), and NEQ (not equivalent) according to ISO/ lEe Guide 21.

Pneumatic fluid power -- Compressed-air lubricators -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature

ISO 6301-1:2009 气液传动.压缩空气轮滑器.第1部分:包括在供应商印刷品和产品标注要求中的主要特性

Pneumatic fluid power - Compressed-air lubricators - Part 1: Main characteristics to be included in supplier's literature and product-marking requirements

SAE AS603B-2009 液压软管,管道和配件的脉冲测试

This SAE Aerospace Standard (AS) establishes the requirements and procedures for impulse testing of hose, tubing, and fitting assemblies for use in aerospace hydraulic systems of 8000 psi nominal operating pressure or less. It also refers to standard impulse test equipment to be used in conducting these impulse tests.

Impulse Testing of Hydraulic Hose, Tubing, and Fitting Assemblies

ISO/TR 10771-2:2008 液压流体动力.含外壳的金属压力用疲劳压力测试.第2部分:定额方法

Hydraulic fluid power - Fatigue pressure testing of metal pressure-containing envelopes - Part 2: Rating methods

JB/T 5968-2008 液粘调速器 型式和基本参数

本标准规定了液粘调速器的术语、型式和基本参数。 本标准适用于以矿物油为工作介质的以钢制或覆以衬面的摩擦片为基础构件的各类型液粘调速器。

Hydroviscous variable device. Types and basic parameters

SAE AS603A-2008 液压软管、管道和配件组件的脉冲试验

This SAE Aerospace Standard (AS) establishes the requirements and procedures for impulse testing of hose, tubing, and fitting assemblies for use in aerospace hydraulic systems of 8000 psi nominal operating pressure or less. It also refers to standard impulse test equipment to be used in conducting these impulse tests.

Impulse Testing of Hydraulic Hose, Tubing, and Fitting Assemblies

KS B ISO 3722:2007 液压传动.液体样品容器.合格和清洁控制方法

이 규격은 산업, 자동차, 선박 및 항공 우주 분야의 유압 유체 동력 적용에 사용되는 작동

Hydraulic fluid power－Fluid sample containers－Qualifying and controlling cleaning methods

DIN EN 14359:2007 液压设备用充气式蓄能器.

1.1 This European Standard specifies the requirements for materials, design, manufacture, testing inspection, safety systems and documentation (including instructions for first operation), for commonly-used types of gas-loaded accumulators and gas bottles for fluid power applications (see 1.2). 1.2 This European Standard applies to the following types of components, defined as the pressure-containing envelope of gas-loaded accumulators: — bladder type; — diaphragm type; — piston type; — transfer type; ? — gas bottles used to provide additional gas capacity. They consist of one or several parts joined together by a variety of mechanical means and by welding. 1.3 This European Standard applies to gas-loaded accumulators which operate with the following conditions: — subject to an internal gauge pressure greater than 0,5 bar; — working temperature of not lower than -50 °C and not higher than +200 °C; — containing Group 2 liquids and gases as defined in the Pressure Equipment Directive 97/23/EC. It does not apply to: — accumulators for use with dangerous fluids (see NOTE 1). NOTE 1 Fluid power applications utilize non-dangerous fluids as categorized in ISO 6743-4 in addition to an inert gas (e.g. nitrogen) which is used as the pre-charging medium. NOTE 2 There are no design limits to the volume of the accumulator.

Gas-loaded accumulators for fluid power applications; English version EN 14359:2007-02

JB/T 7046-2006 液压蓄能器压力容腔体的额定疲劳压力和额定静态压力验证方法

本标准规定了液压蓄能器压力容腔体的额定疲劳压力和额定静态压力的验证方法。 本标准适用于金属材料制成的气液式蓄能器的压力容腔体。 本标准也适用于由金属材料制成的用来分隔两种液体的液压传递器，及与蓄能器的储气腔相连的气瓶。 本标准不适用于由非金属材料制成的蓄能器、液压传递器和气瓶，也不适用于非气液式（例如重锤式或弹簧式）蓄能器。 本标准不适用于因化学反应或金属腐蚀而导致材料强度下降后的验证。

Hydraulic fluid power Accumulators Verify methods of rated fatigue pressure and rated static pressure of pressure-containing envelopes

JB/T 5921-2006 液压系统用冷却器 基本参数

本标准规定了液压系统用冷却器的基本参数。 本标准适用于以液压油液为工作介质的各类液压系统用冷却器。

Hydraulic fluid power Basic parameters of the cooler

NF E49-320-2:2006 气动液压动力.压缩空气润滑器.第2部分:测定供应商资料中应包含的主要特性试验方法

Pneumatic fluid power - Compressed-air lubricators - Part 2 : test methods to determine the main characteristics to be included in supplier's literature.

ISO 6301-2:2006 气动液压传动.压缩空气油雾器.第2部分:测定供应商文件中包括的主要特性的试验方法

This part of ISO 6301 specifies tests, procedures and a method of presenting the results concerning the parameters that define the main characteristics to be included in the supplier’s literature of lubricators conforming to ISO 6301-1. This part of ISO 6301 can be applied ⎯ to facilitate the comparison of lubricators by standardizing test methods and presentation of test data; ⎯ to assist in the proper application of lubricators in compressed-air systems. The tests specified are intended to allow comparison between the different types of lubricators; they are not production tests to be carried out on each lubricator manufactured.

Pneumatic fluid power - Compressed-air lubricators - Part 2: Test methods to determine the main characteristics to be included in supplier's literature

JB/T 7038-2006 液压隔离式蓄能器壳体.技术条件

本标准规定了液压隔离式蓄能器（以下简称蓄能器）壳体的技术要求。 本标准适用于公称压力不大于63MPa、公称容积不大于250L，工作温度为-10℃～70℃，以氮气/石油基液压油或乳化液为工作介质的蓄能器。

Hydraulic fluid power.The shell of accumulators with separator.Technique requirements

JB/T 7036-2006 液压隔离式蓄能器.技术条件

本标准规定了液压隔离式蓄能器（以下简称蓄能器）的技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于公称压力不大于63MPa、公称容积不大于250L，工作温度为-10℃～70℃，以氮气/石油基液压油或乳化液为工作介质的蓄能器。

Hydraulic fluid power.Accumulators with separator.Technical requirements

JB/T 7035-2006 液压囊式蓄能器.型式和尺寸

本标准规定了液压囊式蓄能器的型式和尺寸。 本标准适用于公称压力为lOMPa～63MPa，公称容积为0.4L～250L，以氮气/石油基液压油或乳化液为工作介质，工作温度为-10℃～70℃的蓄能器。

Hydraulic fluid power.Bladder type accumulators.Type and dimensions

JB/T 7034-2006 液压隔膜式蓄能器.型式和尺寸

本标准规定了液压隔膜式蓄能器的型式和尺寸。 本标准适用于公称压力为6.3MPa～40MPa，公称容积为0.25L～16L，以氮气/石油基液压油、乳化液或水为工作介质，工作温度为-10℃～70℃的蓄能器。

Hydraulic fluid power.Diaphragm type accumulators.Type and dimensions

JB/T 7037-2006 液压隔离式蓄能器.试验方法

本标准规定了液压隔离式蓄能器(以下简称蓄能器)的试验装置及条件、试验项目及方法。 本标准适用于公称压力不大于63MPa、公称容积不大于250L，工作温度为-10℃～70℃，以氮气/石油基液压油或乳化液为工作介质的蓄能器。

Hydraulic fluid power.Accumulators with separator.Test methods

KS B ISO 10771-1-2006(2011) 液压传动金属承压外壳疲劳压力试验第1部分:试验方法

Hydraulic fluid power－Fatigue pressure testing of metal pressure-containing envelopes－Part 1：Test method