23.120 通风机、风扇、空调器 标准查询与下载



共找到 973 条与 通风机、风扇、空调器 相关的标准,共 65

Method of measurement of air quantity for ventilation and air conditioning system

ICS
23.120
CCS
发布
2016-12-28
实施

Method of measurement of air quantity for ventilation and air conditioning system

ICS
23.120
CCS
发布
2016-12-28
实施

This International Standard prescribes a method of testing the ventilation and energy related performance of heat recovery ventilators (HRVs) and energy recovery ventilators (ERVs) that do not contain any supplemental heating (except for defrost), cooling, humidification or dehumidification components.

Heat recovery ventilators and energy recovery ventilators -- Method of test for performance

ICS
23.120
CCS
发布
2016-12-22
实施

1.1 This part of ISO 16358 specifies the testing and calculating methods for seasonal performance factor of equipment covered by ISO 5151, ISO 13253 and ISO 15042. 1.2 This part of ISO 16358 also specifies the seasonal performance test conditions and the corresponding test procedures for determining the seasonal performance factor of equipment, as specified in 1.1, under mandatory test conditions and is intended for use only in marking, comparison, and certification purposes. For the purposes of this part of ISO 16358, the rating conditions are those specified under T1 in the reference standards in 1.1. The procedures in this part of ISO 16358 may be used for other temperature conditions. 1.3 This part of ISO 16358 does not apply to the testing and rating of: a) water-source heat pumps or water-cooled air conditioners; b) portable units having a condenser exhaust duct; c) individual assemblies not constituting a complete refrigeration system; or d) equipment using the absorption refrigeration cycle.

Air-cooled air conditioners and air-to-air heat pumps -- Testing and calculating methods for seasonal performance factors -- Part 1: Cooling seasonal performance factor

ICS
23.120
CCS
发布
2016-12-22
实施

1.1 This part of ISO 16358 specifies the testing and calculating methods for seasonal performance factor of equipment covered by ISO 5151, ISO 13253 and ISO 15042. 1.2 This part of ISO 16358 also specifies the seasonal performance test conditions and the corresponding test procedures for determining the seasonal performance factor of equipment, as specified in 1.1., under mandatory test conditions and is intended for use only in marking, comparison, and certification purposes. 1.3 This part of ISO 16358 does not apply to the testing and rating of: a) water-source heat pumps or water-cooled air conditioners; b) portable units having a condenser exhaust duct; c) individual assemblies not constituting a complete refrigeration system; or d) equipment using the absorption refrigeration cycle.

Air-cooled air conditioners and air-to-air heat pumps -- Testing and calculating methods for seasonal performance factors -- Part 3: Annual performance factor

ICS
23.120
CCS
发布
2016-12-22
实施

1.1 This part of ISO 16358 specifies the testing and calculating methods for seasonal performance factor of equipment covered by ISO 5151, ISO 13253 and ISO 15042. For the purposes of this part of ISO 16358, it is assumed that any make-up heating will be provided by electric heaters running concurrently with the heat pump. 1.2 This part of ISO 16358 also specifies the seasonal performance test conditions and the corresponding test procedures for determining the seasonal performance factor of equipment, as specified in 1.1, under mandatory test conditions and is intended for use only in marking, comparison, and certification purposes. 1.3 This part of ISO 16358 does not apply to the testing and rating of: a) water-source heat pumps or water-cooled air conditioners; b) portable units having a condenser exhaust duct; c) individual assemblies not constituting a complete refrigeration system; or d) equipment using the absorption refrigeration cycle.

Air-cooled air conditioners and air-to-air heat pumps -- Testing and calculating methods for seasonal performance factors -- Part 2: Heating seasonal performance factor

ICS
23.120
CCS
发布
2016-12-22
实施

BS EN ISO 12759-3. Fans. Efficiency classification for fans. Part 3. Fans without drives at maximum operating speed

ICS
23.120
CCS
发布
2016-12-19
实施
2016-12-19

本标准规定了工业级及类似用途旋涡式气泵的术语和定义、分类、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本标准适用于交流电压,压力范围4 kPa~105 kPa,真空度范围-4 kPa~-73 kPa,输送介质为空气的工业用及类似用途单级、双级、三级、多级等直联旋涡式气泵((以下简称“气泵”)。

Ring blower for industrial and similar application

ICS
23.120
CCS
C3462
发布
2016-10-31
实施
2017-03-06

本标准规定了核电站用核级轴流式通风机(以下简称“风机”)基本要求、技术要求、试验方法、检验规则、标志、包装和储存、质量保证与承诺。 本标准适用于核电站用核级轴流式通风机。

Axial fans for nuclear island of nuclear power plant

ICS
23.120
CCS
C3462
发布
2016-09-30
实施
2017-03-06

This standard specifies the energy labelling requirements and the Minimum Energy Performance Standard (MEPS) requirements for single-package of window type, split-system non-ducted air conditioners using air-cooled condensers, split-system ducted air-conditioners using air-cooled condensers, and heat pumps using air-cooled condensers for residential, commercial and industrial sector as applicable in accordance with GSO SASO Standards. It is applied to units designed to operate in AC single phase or three phase circuits according to GSO 1899/2009 "GCC Standard voltages and frequencies for AC transmission and distribution systems". It covers units with capacities up to and including 70000 Btu/h (20 kW). This standard is applied to the following GSO Member States: - Sultanate of Oman - Yemen This Standard is not applied to the following GSO Member States: - United Arab Emirates - Kingdom of Bahrain - Kingdom of Saudi Arabia - Kuwait - Qatar Annex C refers to the National regulations applied for GSO Member States excluded from this Standard

Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners

ICS
23.120
CCS
发布
2016-09-27
实施

This GSO Standard deals with the safety requirements, testing methods and rating for performance requirements for air-conditioner appliances. It covers air conditioners of windows and split types, ducted or non-ducted air conditioners, employing air cooled condensers and designed to operate according to the voltages and frequencies mentioned in Annex A. It covers air conditioners of cooling type only or cooling/heating, either heating carried out by using electrical elements or by using heat pump system. It covers air-conditioners of capacities up to and including 70000 Btu/hr (20 Kw).

Saftey and Performance Requirements for Air-conditioners and Methods of test including MEPS

ICS
23.120
CCS
发布
2016-09-27
实施

1.1 This Standard applies to mechanical flue-gas exhausters intended to be installed in a flue pipe, breeching, or chimney and serving appliances burning natural gas, propane, or fuel oil. 1.2 This Standard covers the mechanical and electrical features of mechanical flue-gas exhausters for indoor or outdoor installations. 1.3 This Standard classifies mechanical flue-gas exhausters as: a) Type 1 is suitable for maximum operating temperatures of 300 °C (575 °F); b) Type 2 is suitable for maximum operating temperatures of 550 °C (1000 °F); and c) Type 3 is suitable for maximum operating temperatures of 850 °C (1600 °F). 1.4 This Standard is not intended to cover mechanical flue-gas exhausters with motor ratings exceeding 375 W (1/2 hp). 1.5 This Standard is not intended to cover mechanical flue-gas exhausters for use with incinerators, incinerating toilets, or condensing type or solid fuel burning appliances. 1.6 This Standard may also be applied to such equipment as air circulators and boosters. 1.7 The values given in SI units are the units of record for the purposes of this Standard. The values given in parentheses are for information and comparison only. 1.8 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements.Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.

Mechanical flue-gas exhausters

ICS
23.120
CCS
发布
2016-07-01
实施

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

ICS
23.120
CCS
发布
2016-04-28
实施

Industrial fans - Performance testing in situ (ISO 5802:2001 + Amd 1:2015); German version EN ISO 5802:2008 + A1:2015

ICS
23.120
CCS
J72
发布
2016-02
实施

Fans - Performance testing of jet fans (ISO 13350:2015); German version EN ISO 13350:2015

ICS
23.120
CCS
J72
发布
2016-02
实施

本标准规定了无润滑往复活塞高纯氮气压缩机(以下简称氮压机)的技术性能、技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于吸气压力大于或等于0.001 MPa,额定排气压力小于或等于16.5 MPa,公称活塞力不大于120 kN的氮压机。 其他高纯气体压缩机也可参照执行。

High purity nitrogen compressors of non-lubricated reciprocating type

ICS
23.120
CCS
J76
发布
2016-01-15
实施
2016-06-01

Industrial fans. Performance testing of jet fans

ICS
23.120
CCS
发布
2016-00-00
实施
2018-07-01

Indoor air intelligent purification replacement device

ICS
23.120
CCS
Q 76
发布
2015-12-25
实施
2016-02-01

Forward-curved bladed fans

ICS
23.120
CCS
发布
2015-12-24
实施

Testing methods for air preheaters

ICS
23.120
CCS
发布
2015-12-23
实施



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号