25.040 工业自动化系统 标准查询与下载

EN 62657-1:2017 工业通信网络 无线通信网络 第1部分：无线通信要求和频谱考虑

IEC 62657-1:2017 provides the wireless communication requirements dictated by the applications of wireless communication systems in industrial automation, and requirements of related context. The requirements are specified in a way that is independent of the wireless technology employed. The requirements are described in detail and in such a way as to be understood by a large audience, including readers who are not familiar with the industry applications. This first edition cancels and replaces the first edition of IEC TS 62657-1 published in 2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC TS 62657‑1:2014: a) update of requirements for wireless industrial applications; b) addition of performance indicators and their measurement.

Industrial communication networks - Wireless communication networks - Part 1: Wireless communication requirements and spectrum considerations

GSO IEC/TR 62699-1:2017 异构电子零件库的映射规则和交换方法 第1部分：构建集成搜索系统

This part of IEC 62699 describes mapping rules and exchange methods for the development of general and extendable integrated services utilizing heterogeneous multi-national or multienterprise electronic parts library data. The scope of this technical report is as follows: a) identification and classification of mapping types for mapping heterogeneous electronic parts libraries; b) definition of general mapping rules and specific mapping rules commonly applying to various mapping types. The following aspects are out of the scope of this technical report: • schematic definition and management of the electronic parts libraries to be mapped; • maintenance process for the parts libraries during changes.

Mapping rules and exchange methods for heterogeneous electronic parts libraries - Part 1: Building an integrated search system

GSO IEC 61445:2017 数字测试交换格式 (DTIF)

This standard defines the information content and the data formats for the interchange of digital test program data between DATPGs and automatic test equipment (ATE) for board-level printed circuit assemblies. This information can be broadly grouped into data that defines the following: a) UUT Model; b) Stimulus and Response; c) Faults Dictionary; d) Probe.

Digital Test Interchange Format (DTIF)

DB14/T 1251-2016 信息技术服务外包安全要求

Security requirements for information technology service outsourcing

DB14/T 1252-2016 信息化工程安全建设和管理规范

Specifications for safe construction and management of information engineering

KS C IEC 62527-2015(2020) 标准扩展到标准测试界面语言为直流电平规范

Standard for Extensions to Standard Test Interface Language for DC Level Specification

KS C IEC 62527:2015 直流电平规范的标准测试接口语言扩展标准

Standard for Extensions to Standard Test Interface Language for DC Level Specification

KS C IEC TR 61926-1-1:2015 设计自动化 第 1-1 部分：ATLAS 测试语言的协调

Design automation ― Part 1-1: Harmonization of ATLAS test languages

KS C IEC TR 61926-1-1-2015(2020) 设计自动化第1-1部分:ATLAS测试语言的协调

Design automation ― Part 1-1: Harmonization of ATLAS test languages

KS C IEC 62526-2015(2020) 标准测试接口语言（stil）用于半导体设计环境

Standard for Extensions to Standard Test Interface Language (STIL) for Semiconductor Design Environments

KS C IEC 62526:2015 半导体设计环境标准测试接口语言（STIL）的扩展标准

Standard for Extensions to Standard Test Interface Language (STIL) for Semiconductor Design Environments

IEC 63004:2015 标准接收器夹具接口

Standard for receiver fixture interface

GSO IEC 62264-1:2015 项目控制系统集成 第1部分：模型和术语

This part of the IEC 62264 series describes the manufacturing operations management domain (Level 3) and its activities, and the interface content and associated transactions within Level 3 and between Level 3 and Level 4. This description enables integration between the manufacturing operations and control domain (Levels 3, 2, 1) and the enterprise domain (Level 4). The interface content between Level 3 and Level 2 is only briefly discussed. The goals are to increase uniformity and consistency of interface terminology and reduce the risk, cost, and errors associated with implementing these interfaces. IEC 62264-1 can be used to reduce the effort associated with implementing new product offerings. The goal is to have enterprise systems and control systems that inter-operate and easily integrate. The scope of this part of IEC 62264 is limited to: a) a presentation of the enterprise domain and the manufacturing operations and control domain; b) the definition of three hierarchical models; a functional hierarchy model, a role-based equipment hierarchy model, and a physical asset equipment hierarchy model; c) a listing of the functions associated with the interface between manufacturing operations and control functions and enterprise functions; and d) a description of the information that is shared between manufacturing operations and control functions and enterprise functions.

Enterprise-control system integration - Part 1: Models and terminology

GSO IEC 62527:2015 DC 电平规范的标准测试接口语言 (STIL) 扩展规范

This standard defines the following: a) Defines structures in STIL for specifying the DC conditions for a DUT. Examples of the DC condi-tions for device power supplies are DPS setup, power sequencing to the device, and power supply limiting/clamping. Examples of the DC conditions for commonly used signal references are VIL, VIII, VOL, VOH, 10L, IOH, VREF, VCIampLow, and VCIampHi. b) Defines structures in STIL such that the DC conditions may be specified either globally, by pattern burst, by pattern, or by vector. c) Defines structures in STIL to allow specification of alternate DC levels. Examples of commonly used alternate levels are VIHH, VIPP, and VILL. d) Defines structures in STIL such that the DC levels and alternate levels can be selected within a period, much the same as timed format events.

Standard for Extensions to Standard Test Interface Language (STIL) for DC Level Specification

GSO IEC 62734:2015 工业网络 无线网络和通信分析 国际自动化协会的无线互连标准 ISA 100.11a

This International Standard specifies a method of reliable ‎and secure wireless operation for non-critical monitoring, ‎alerting, supervisory control, open loop control, and closed ‎loop control applications. This standard defines a protocol ‎suite, including system management, gateway considerations, ‎and security specifications, for low-data-rate wireless ‎connectivity with fixed, portable, and slowly-moving ‎devices, often operating under severe energy and power ‎constraints. The application focus of this standard is the ‎performance needs of process automation monitoring and ‎control, where end-to-end communication delays on the ‎order of 100 ms can be tolerated.‎ This standard specifies the following:‎ ‎• physical layer service definition and protocol specification;‎ ‎• data-link layer service definition and protocol ‎specification;‎ ‎• network layer service definition and protocol specification;‎ ‎• transport layer service definition and protocol ‎specification;‎ ‎• application layer service definition and protocol ‎specification, including support for protocol tunneling and ‎gateways;‎ ‎• security and security management;‎ ‎• provisioning and configuration;‎ ‎• network management; and‎ ‎• additive communication role profiles (i.e., one or more can ‎be selected concurrently).‎ Functionality above the application layer of the OSI Basic ‎Reference Model, such as the socalled User Layer and ‎different profiles for functionality at that layer, is not ‎addressed. However, it is discussed briefly in Annex A.‎

Industrial networks - Wireless communication network and communication profiles - ISA 100.11a

GSO IEC/TR 61804-6:2015 过程控制功能 电子设备描述语言 (EDDL) 第6部分：满足现场设备工程工具中的现场总线设备集成要求

This Technical Report (TR) provides an evaluation and assessment of electronic device description language (EDDL) technology. It provides guidance to device and system manufacturers for how EDDL technology can help them meet user requirements. It provides guidance to system integrators, as well as instrumentation and maintenance practitioners at end-user companies, on how EDDL technology can help them integrate systems and incorporate device management in their work processes. This TR gives examples of requirements from the NAMUR NE 105 recommendation. It is the intent of this TR to illustrate how EDDL technology and products based on EDDL technology meet these requirements. This TR provides a current assessment of the capability of the EDDL technology and the features and capabilities it enables in devices and tools such as handheld field communicators, distributed control system (DCS) engineering software, DCS operator software, device management software as part of plant asset management solutions, as well as stand-alone software for use in laptop or tablet computers.

Function blocks (FB) for process control - Electronic device description language (EDDL) - Part 6: Meeting the requirements for integrating fieldbus devices in engineering tools for field devices

DB32/T 2765-2015 工业控制系统信息安全管理监督检查工作规范

本标准规定了工业控制系统信息安全管理监督检查工作的术语和定义、检查对象、检查目的、检查形式、检查方法、检查原则、检查流程和检查内容。 本标准适用于规范工业控制系统的运营、使用、维护、管理等部门开展的工业控制系统信息安全管理监督检查工作。

Industrial control system information security management supervision and inspection work specification

DB32/T 2766.1-2015 重要信息系统安全防护技术规范 第1部分：主机操作系统

本规范规定了重要信息系统主机操作系统层面的安全防护实施技术规范。 本规范适用于政府和企事业单位重要信息系统主机操作系统层面安全防护的实施、操作。

Important Information System Security Protection Technical Specification Part 1: Host Operating System

DB32/T 2766.2-2015 重要信息系统安全防护技术规范 第2部分：交换机

本标准规定了重要信息系统中交换机设备的安全防护要求，以帮助信息系统运维单位对信息系统网络中的交换机设备进行安全运维，提高实际建设、整改、运维的操作能力。 本标准适用于重要信息系统中核心交换机产品的安全运维与防护。

Important Information System Security Protection Technical Specifications Part 2: Switches

DB32/T 2766.3-2015 重要信息系统安全防护技术规范 第3部分：路由器

本标准规定了重要信息系统中路由器设备的安全技术防护要求和安全防护方法，以帮助和指导重要信息系统管理、运维和使用等单位对网络信息系统中的路由器设备进行安全配置、安全管理和安全运维，提高路由器设备的安全技术防护能力。 本标准适用于重要信息系统中路由器设备的安全管理、安全运维与防护。

Important Information System Security Protection Technical Specifications Part 3: Routers