共找到 188 条与 机床装置综合 相关的标准,共 13 页
本标准规定了锥柄工具用快换套的型式和尺寸。
Quick change bush for taper shank tool.Dimensions
本标准规定了丝锥用快换套的型式和尺寸。
Quick change bush for tap.Dimensions
本标准规定了丝锥用安全夹套的型式和尺寸。
Safe chuck for tap.Dimensions
本标准规定了丝锥安全夹套用夹头的型式和尺寸。
Holder for safe chunk of tap.Dimensions
本标准规定了锥柄90°镗刀杆的型式和尺寸。
Taper shank arbor for 90°boring tool.Dimensions
本标准规定了锥柄轴向紧固90°镗刀杆的型式和尺寸。
Taper shank axial fasten 90°boring tool arbor.Dimensions
本标准规定了锥柄45°镗刀杆的型式和尺寸。
Taper shank 45°boringtool arbor.Dimensions
本标准规定了锥柄90°镗刀杆的型式和尺寸。
Taper shank 60°boring tool arbor.Dimensions
本标准规定了锥柄卡口镗铰刀杆的型式和尺寸。
Taper shank arbor for boring tool and reamer with holddown open.Dimensions
本标准规定了不通孔用锥柄卡口镗铰刀杆的型式和尺寸。
Taper shank arbor for boring tool and reamer for working blind hole with holddown open.Dimensions
本标准规定了锥柄镗铰刀杆的型式和尺寸。
Taper shank arbor for boring tool and reamer.Dimensions
本标准规定了定心圆锥螺钉的型式和尺寸。
Taper screw for centring.Dimensions
本标准规定了键槽拉刀夹头的型式和尺寸。
Holder for keyway broach.Dimensions
本标准规定了单键拉刀导套的型式和尺寸。 本标准规定的拉刀导套适用于GB/T 14329.2-1993《加宽平刀体键槽拉刀 型式与尺寸》、GB/T 14329.3-1993《带倒角齿键槽拉刀 型式与尺寸》及GB/T 14329.1-1993《平刀体键槽拉刀 型式与尺寸》相配合使用来加工GB/T 1095-1979《平键、键和键槽的剖面尺寸》中3~32mm宽的键槽。
Guide bush for single key broach.Dimensions
本标准规定了键槽拉削用垫片的型式和尺寸。
Washer for keyway broaching.Dimensions
本标准规定了可换锥柄式可调镗刀架的型式和尺寸。 本标准适用于主轴锥柄孔为7:24圆锥40、45、50号的普通镗床上所用的可调镗刀架。
Changeable taper shank type adjustable boring tool holder.Dimensions
本标准规定了7:24圆锥/强制传动的莫氏圆锥长型中间套的型式和尺寸。
Long changing diameter bush with 7:24 taper/positive mose taper.Dimensions
本标准规定了齿轮倒角机的参数。 本标准适用于新设计的最大工件直径 200~800mm 的齿轮倒角机。
Gear tooth chamfering machines parameters
本标准规定了齿轮倒角机的几何精度、工作精度的要求及检验方法 本标准适用于最大工作直径200~800mm的齿轮倒角机。
Gear tooth chamfering machines Accuracy inspection
本标准仅规定直齿端齿盘的系列参数和互换性尺寸。 本标准适用于金属切削机床圆分度用的齿盘。
Straight-tooth end-toothed disc Parameters and dimensions of series
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号