25.080.01 机床综合 标准查询与下载

T/WLJC 115-2022 机床装备产品三维设计 产品图样的综合表示要求

1　范围 2　规范性引用文件　 3　术语和定义 4   产品图样的综合表示要求　 5   几种典型零件的综合表示：轴类零件的表示、轴套类零件的表示、盘盖类零件的表示、叉架类零件的表示、箱体类零件的表示、其他零件的表示、装配体中零件的表示

Designof three-dimensional for Machine tool products Synthesize show request of product drawings

T/WLJC 106-2022 机床装备产品三维设计 图样配置的基本规定

1　范围 2　规范性引用文件 3　术语和定义 4　图纸幅面和格式的配置 5　标题栏的配置 6　明细栏的配置 7　技术要求的配置 8　图样注语

Designof three-dimensional for machine tool products General principles of drawing configure

T/WLJC 114-2022 机床装备产品三维设计 工艺符号的表示法

1　范围 2　规范性引用文件 3　术语和定义 4　工艺符号表示的基本原则 5　工艺流程符号的表示 6　机械加工定位、夹紧符号的表示 7　金属切削代（符）号的表示　 8　机加工工艺符号的表示法

Designof three-dimensional for Machine tool products Indication of technological symbols

T/WLJC 113-2022 机床装备产品三维设计 设计符号的表示法

1　范围 2　规范性引用文件 3　术语和定义 4　设计符号表示的基本规则 5　尺寸标注符号的表示 6　几何公差符号的表示 7　表面特征符号的表示 8　焊缝符号的表示

Designof three-dimensional for Machine tool products Indication of design symbols

T/WLJC 108-2022 机床装备产品三维设计 图样画法的基本规定

1　范围 2　规范性引用文件 3　术语和定义 4　视图的基本规定：基本要求、视图的选择、视图的画法要求 5　剖视图和断面图的基本规定：基本要求、剖切面的种类、剖视图、断面图、剖视图和断面图的标注 6　简化表示法：简化原则、基本要求

Designof three-dimensional for Machine tool products General principles of drawings presentation

BS ISO 230-12:2022 机床检验规范成品试件精度

1   Scope This document specifies methods for defining machining tests for manufacturing accurate test pieces, and for evaluating the influence of quasi-static geometric errors of linear axes and rotary axes, and the influence of the synchronization error of simultaneously controlled multiple axes. Although quasi-static geometric errors are often major contributors for geometric errors of finished test pieces, other factors, e.g. the dynamic contouring error, can also have significant influence. This document describes examples of test piece geometry applicable to individual machine tools, possible contributors to machining error, deviations to be measured and measuring instruments. By clarifying possible contributors to machining error in each machining test, this document gives a guidance to machine tool manufacturers or users such that proper machining tests can be chosen to evaluate a machine tool’s machining performance in specified machining applications. Machining tests to evaluate the geometric accuracy of a single surface are described in Clause 5, and those to evaluate geometric relationship of multiple machining features are described in Clause 6. Clause 7 presents machining tests for other objectives: machining tests for evaluation of short-term capability (7.2), and machining tests for evaluation of thermal influence (7.3).

Test code for machine tools - Accuracy of finished test pieces

BS EN ISO 28881:2022 机械工具 安全 放电加工机

1   Scope This document specifies safety requirements and/or protective measures applicable to EDM equipment and EDM systems intended to be adopted by persons undertaking their design, construction, installation and/or supply, such as: — manually controlled EDM die sinking or EDM drilling machines; — numerically controlled EDM die sinking or EDM drilling machines; and — numerically controlled EDM wire cutting machines. This document also includes information to be provided by the manufacturer to the user. This document is not applicable to arc eroding and electro-chemical machining equipment. This document takes account of the precondition of the intended use as well as the reasonably foreseeable misuse, in normal workshop environments and non-explosive atmospheres, including transportation, installation, setting, maintenance, repair and dismantling for removal or disposal of EDM equipment and EDM systems. This document is also applicable to auxiliary devices essential for EDM processing. This document deals with all significant hazards, hazardous situations or ha...

Machine tools. Safety. Electrical discharge machines

KS B ISO 230-10-2022 机床试验规范第10部分：数控机床测头系统测量性能的测定

Test code for machine tools ― Part 10：Determination of the measuring performance of probing systems of numerically controlled machine tools

KS B ISO 16089-2022 机床 安全 固定式磨床

Machine tools — Safety — Stationary grinding machines

EN ISO 28881:2022 机床.安全性.电火花加工机械

This document specifies safety requirements and/or protective measures applicable to EDM equipment and EDM systems intended to be adopted by persons undertaking their design, construction, installation and/or supply, such as: — manually controlled EDM die sinking or EDM drilling machines; — numerically controlled EDM die sinking or EDM drilling machines; and — numerically controlled EDM wire cutting machines. This document also includes information to be provided by the manufacturer to the user. This document is not applicable to arc eroding and electro-chemical machining equipment. This document takes account of the precondition of the intended use as well as the reasonably foreseeable misuse, in normal workshop environments and non-explosive atmospheres, including transportation, installation, setting, maintenance, repair and dismantling for removal or disposal of EDM equipment and EDM systems. This document is also applicable to auxiliary devices essential for EDM processing. This document deals with all significant hazards, hazardous situations or hazardous events relevant to EDM equipment and EDM systems, where they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This document is intended to apply to machines manufactured after the date of publication of this document. When requirements of this type-C standard are different from those which are stated in type-A or -B standards, the requirements of this type-C standard take precedence over the requirements of other standards for machines that have been designed and built according to the requirements of this type-C standard. This document defines required performance level and safety categories of the safety-related parts of the control system for EDM equipment and EDM systems as defined in ISO 13849-1:2015.

Machine tools - Safety - Electrical discharge machines (ISO 28881:2022)

ISO 230-12:2022 机床试验规程.第12部分:成品试样的精度

This document specifies methods for defining machining tests for manufacturing accurate test pieces, and for evaluating the influence of quasi-static geometric errors of linear axes and rotary axes, and the influence of the synchronization error of simultaneously controlled multiple axes. Although quasi- static geometric errors are often major contributors for geometric errors of finished test pieces, other factors, e.g. the dynamic contouring error, can also have significant influence. This document describes examples of test piece geometry applicable to individual machine tools, possible contributors to machining error, deviations to be measured and measuring instruments. By clarifying possible contributors to machining error in each machining test, this document gives a guidance to machine tool manufacturers or users such that proper machining tests can be chosen to evaluate a machine tool’s machining performance in specified machining applications. Machining tests to evaluate the geometric accuracy of a single surface are described in Clause 5, and those to evaluate geometric relationship of multiple machining features are described in Clause 6. Clause 7 presents machining tests for other objectives: machining tests for evaluation of short-term capability (7.2), and machining tests for evaluation of thermal influence (7.3).

Test code for machine tools — Part 12: Accuracy of finished test pieces

GSO ISO 16092-4:2022 机床安全 压力机 第4部分：气动压力机的安全要求

This document, in addition to ISO 16092-1, specifies the technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of pneumatic presses which are intended to work cold metal or material partly of cold metal. This document deals with all significant hazards relevant for pneumatic presses, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). All the phases of the lifetime of the machinery as described in ISO 12100:2010, 5.4, have been taken into consideration.

Machine tools safety — Presses — Part 4: Safety requirements for pneumatic presses

GSO ISO 16092-3:2022 机床安全 压力机 第3部分：液压机的安全要求

ISO 16092-3:2017, in addition to ISO 16092‑1, specifies the technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of hydraulic presses which are intended to work cold metal or material partly made up of cold metal. The presses covered by this document range in size from small high-speed machines with a single operator producing small workpieces to large relatively slow-speed machines with several operators and large complex workpieces. ISO 16092-3:2017 deals with all significant hazards relevant for hydraulic presses when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). All the phases of the lifetime of the machinery as described in ISO 12100:2010, 5.4 have been taken into consideration.

Machine tools safety — Presses — Part 3: Safety requirements for hydraulic presses

GSO ISO 16092-1:2022 机床安全 压力机 第1部分：一般安全要求

ISO 16092-1:2017 specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of presses which are intended to work cold metal or material partly of cold metal, but which can be used in the same way to work other sheet materials (e.g. cardboard, plastic, rubber, leather, etc.). NOTE 1 The design of a machine includes the study of the machine itself, taking into account all phases of the "life" of the machine mentioned in ISO 12100:2010, 5.4, and the drafting of the instructions related to all the above phases. The requirements in this document take account of intended use, as defined in ISO 12100:2010, 3.23, as well as reasonably foreseeable misuse, as defined in ISO 12100:2010, 3.24. This document presumes access to the press from all directions, deals with all significant hazards during the various phases of the life of the machine described in Clause 4, and specifies the safety measures for both the operator and other exposed persons. NOTE 2 All significant hazards means those identified or associated with presses at the time of the publication of this document. ISO 16092-1:2017 applies to presses which can function independently and can also be used as a guide for the design of presses which are intended to be integrated in a manufacturing system. The covered presses transmit force mechanically to cut, form, or work cold metal or other sheet materials by means of tools or dies attached to or operated by slides/ram in range in size from small high speed machines with a single operator producing small workpieces to large relatively slow speed machines with several operators and large workpieces. ISO 16092-1:2017 does not cover machines whose principal designed purpose is: a) metal cutting by guillotine; b) attaching a fastener, e.g. riveting, stapling or stitching; c) bending or folding by press brakes or folding machines; d) straightening; e) turret punch pressing; f) extruding; g) drop forging or drop stamping; h) compaction of metal powder; i) single purpose punching machines designed exclusively for profiles, e.g. used in the construction industry; j) spot welding; k) tube bending; l) working by pneumatic hammer. This document does not cover hazards related to the use of presses in explosive atmospheres. ISO 16092-1:2017 covers the safety requirements related to the use of programmable electronic systems (PES) and programmable pneumatic systems (PPS). ISO 16092-1:2017 is not applicable to presses which are manufactured before the date of its publication. ISO 16092-1:2017 deals with the common significant hazards, hazardous situations and events relevant to presses and ancillary devices which are intended to work cold metal or material partly of cold metal (see Clause 4). This document defines the common safety requirements for presses defined in this clause and shall be used in connection with other parts of the ISO 16092 series. Specific hazards which are related to the type presses used are dealt with in ISO 16092‑2, ISO 16092‑3 and ISO 16092‑4.

Machine tools safety — Presses — Part 1: General safety requirements

BS ISO 230-10:2022 机床测试代码 数控机床探测系统测量性能的测定

1   Scope This document specifies test procedures to evaluate the measuring performance of probing systems integrated with a numerically controlled machine tool. Test procedures for touch trigger probing systems and scanning probing systems operating in discrete-point measurement mode are specified in 7.1. Test procedures are specified for scanning probing systems in 7.2, for bore gauge systems in 7.3, for contacting tool measuring systems in 8.1, and for non-contacting tool measuring systems using the laser light barrier principle in 8.2. The evaluation of the performance of the machine tool, used as a coordinate measuring machine (CMM), is outside the scope of this document. Such performance evaluation involves traceability issues, is strongly influenced by machine tool geometric accuracy and can, in addition to the machine tool probing system tests specified in this document, be evaluated according to ISO 10360‑2 and ISO 10360‑5. Descriptions of test procedures in this document are referred to machining centres. However, tests apply in principle to most NC machine tools.

Test code for machine tools. Determination of the measuring performance of probing systems of numerically controlled machine tools

BS ISO 26303:2022 机械工具 金属切削机床加工工艺的短期能力评估

1   Scope This document specifies procedures for acceptance of metal-cutting machine tools based on the tests of their capability in machining a specified workpiece (i.e. indirect testing). It gives recommendations for test conditions, applicable measurement systems and the requirements for machine tools. This document is consistent with ISO 22514 (all parts) describing statistical methods for process management and deals with the specific application of those methods to machine tools and machining of a sample batch of test pieces. This document covers neither functional tests, which are generally carried out before testing the accuracy performance, nor the testing of the safety conditions of the machine tool. Annex A gives additional information related to statistical evaluation, Annexes B and C provide agreement and evaluations forms for short-term capability tests, while Annex D gives an example. NOTE 1 Direct testing aims to investigate individual machine tool properties, such as geometric or positioning accuracy. Short-term capability evaluation is meant to prove that a machine tool has the capability to fulfil a specific process task. It is, therefore, important to recognize that the short-term capability test is focused only on the manufactured product. This means that direct testing methods are more suited for the determination of error sources on the machine tool and for deriving constructive improvements of a machine tool that is used in a wide production spectrum; a short-term capab...

Machine tools. Short-term capability evaluation of machining processes on metal-cutting machine tools

T/SDMTGM 0010-2022 无机矿物质复合材料机床支承件

 本文件规定了无机矿物质复合材料机床支承件的要求、检验方法、检验规则、标志、包装、运输、储存。  本文件适用于无机矿物质复合材料机床立柱和床身等支承件。

Machine tool supporting parts with inorganic mineral composite material

ISO 28881:2022 机床.安全.放电机床

This document specifies safety requirements and/or protective measures applicable to EDM equipment and EDM systems intended to be adopted by persons undertaking their design, construction, installation and/or supply, such as: — manually controlled EDM die sinking or EDM drilling machines; — numerically controlled EDM die sinking or EDM drilling machines; and — numerically controlled EDM wire cutting machines. This document also includes information to be provided by the manufacturer to the user. This document is not applicable to arc eroding and electro-chemical machining equipment. This document takes account of the precondition of the intended use as well as the reasonably foreseeable misuse, in normal workshop environments and non-explosive atmospheres, including transportation, installation, setting, maintenance, repair and dismantling for removal or disposal of EDM equipment and EDM systems. This document is also applicable to auxiliary devices essential for EDM processing. This document deals with all significant hazards, hazardous situations or hazardous events relevant to EDM equipment and EDM systems, where they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This document is intended to apply to machines manufactured after the date of publication of this document. When requirements of this type-C standard are different from those which are stated in type-A or -B standards, the requirements of this type-C standard take precedence over the requirements of other standards for machines that have been designed and built according to the requirements of this type-C standard. This document defines required performance level and safety categories of the safety-related parts of the control system for EDM equipment and EDM systems as defined in ISO 13849-1:2015.

Machine tools — Safety — Electrical discharge machines

T/SBX 052-2022 汽车保险杠弯曲用设备操作规程

本文件规定了汽车保险杠弯曲的工艺技术类型、性能参数、操作步骤、过程控制因素、检验等内容。 本文件适用于普通碳钢、不锈钢、铝合金、非金属材料、刚度合金钢等材质汽车保险杠。

Operating rules for equipment for bending automobile bumpers

ISO 230-10:2022 机床试验规程第10部分:数控机床探测系统测量性能的测定

This document specifies test procedures to evaluate the measuring performance of probing systems integrated with a numerically controlled machine tool. Test procedures for touch trigger probing systems and scanning probing systems operating in discrete-point measurement mode are specified in 7.1. Test procedures are specified for scanning probing systems in 7.2, for bore gauge systems in 7.3, for contacting tool measuring systems in 8.1, and for non-contacting tool measuring systems using the laser light barrier principle in 8.2. The evaluation of the performance of the machine tool, used as a coordinate measuring machine (CMM), is outside the scope of this document. Such performance evaluation involves traceability issues, is strongly influenced by machine tool geometric accuracy and can, in addition to the machine tool probing system tests specified in this document, be evaluated according to ISO 10360-2 and ISO 10360-5. Descriptions of test procedures in this document are referred to machining centres. However, tests apply in principle to most NC machine tools.

Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools