25.080.01 机床综合 标准查询与下载

KS B ISO 16156-2019 机床安全 - 工作夹紧卡盘的设计和构造的安全要求

Machine-tools safety — Safety requirements for the design and construction of work holding chucks

T/CMTBA 1002.2-2019 重型机床 检测 第2部分：滑枕热变形检测及误差补偿指导准则

本部分规定了重型机床滑枕热变形检测及误差补偿的方法和要求。 本部分适用于带有滑枕的重型落地铣镗床、龙门镗铣床和重型立式铣车床等重型机床。

Heavy-duty machine tools—Tests—Part 2:technical guide to the ram thermal deflection test and error compensation

KS B ISO 14955-1-2019 机床 - 机床环境评估 - 第1部分:高效机床设计方法

Machine tools — Environmental evaluation of machine tools — Part 1: Design methodology for energy-efficient machine tools

T/CMTBA 1002.1-2019 重型机床 检测 第1部分：导轨直线度的测量方法

本部分规定了重型机床导轨直线度测量的术语和定义、计量单位、评定方法、测量方法和测量间距。 本部分适用于重型机床导轨直线度的检测。

Heavy duty machine tools—Tests— Part 1: Straightness measuring method of guideway

T/CMTBA 1001.2-2019 重型机床 基础 第2部分：承载变形计算及测量方法

本部分规定了重型机床基础的承载变形计算及测量方法。 本部分适用于重型机床现浇结构的钢筋混凝土独立基础，通过在该基础中预埋光纤传感器的方法对基础变形进行监测和分析。

Heavy-duty machine tools—Foundation—Part2:Calculation and measurement methods of load deformation

KS B 4109-2019 机床安全通则

General code of safety for machine tools

KS B ISO 16156:2019 机床安全 - 工作夹紧卡盘的设计和构造的安全要求

Machine-tools safety — Safety requirements for the design and construction of work holding chucks

T/CMTBA 1001.1-2019 重型机床 基础 第1部分：设计与施工指南

本部分规定了重型机床基础的设计、施工、安装、验收时应遵循的准则。 本部分适用于重型机床中现浇结构的钢筋混凝土独立基础。

Heavy-duty machine tools—Foundation—Part 1:Design and construction guides

KS B 5264-2019 测试棒

Test bars

KS B 1045-2019 机床锁紧螺母

Lock nuts for machine tools

ISO 16092-4:2019 机床安全压力机第4部分:气动压力机的安全要求

This document, in addition to ISO 16092-1, specifies the technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of pneumatic presses which are intended to work cold metal or material partly of cold metal. This document deals with all significant hazards relevant for pneumatic presses, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). All the phases of the lifetime of the machinery as described in ISO 12100:2010, 5.4, have been taken into consideration.

Machine tools safety — Presses — Part 4: Safety requirements for pneumatic presses

ISO 16092-2:2019 机床安全压力机第2部分:机械压力机的安全要求

This document, in addition to ISO 16092-1, specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of the following groups of mechanical presses and mechanical press production systems: — Group 1: Presses with a part revolution clutch(es); — Group 2: Presses with a servo drive system (Mechanical servo presses). NOTE 1 Requirements in this document are essentially applicable to both groups of the mechanical press. If a requirement applies to only one group, then the group is specified. NOTE 2 Other types of motorized drive systems provide similar functionalities to what is commonly called “servo drives” or "servo motors”, and as such their use is considered the same within the terms used in this document (e.g. variable frequency drive systems). The presses covered by this document range in size from small high-speed machines with a single operator producing small workpieces to large relatively slow-speed machines with several operators and large complex workpieces. This document deals with all significant hazards relevant to mechanical presses and ancillary devices (e.g. moving die cushions, work-piece ejectors, feeding and transfer systems) which are integral to the machine, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). All phases of the machine life cycle as described in NOTE 2 All significant hazards means those identified or associated with presses at the time of the publication of this document. In addition to machines not covered by ISO 16092-1:2017, this document does not cover machines which: a) transmit energy to impart press slide motion by using hydraulic or pneumatic means; b) have two or more slides moving in different angular orientations from each other; NOTE 3 This document applies to presses which have two or more slides moving in the same angular orientations, e.g. a press which has inner and outer slides. c) transmit energy to impart press slide motion by using a linear motor mechanism(s).

Machine tools safety — Presses — Part 2: Safety requirement for mechanical presses

BS ISO 14955-4:2019 机械工具 机床环境评价金属成形机床和激光加工机床能源效率测量原理

What is ISO 14955-4 - Environmental evaluation of machine tools about?    ISO 14955-4 specifies technical requirements and measures for testing procedures for the evaluation of energy required to be adopted by persons undertaking the design, manufacture, and supply of metal forming and laser processing machine tools in order to achieve reproducible data about the energy supplied under specified conditions. ISO 14955-4 provides methods for quantifying the energy supplied to components in order to assign their share to generalized machine tool functions as described in ISO 14955-1 . ISO 14955-4 covers all significant energy requirements relevant to hydraulic (servo) and mechanical (servo) presses, turret punch presses and press brakes, pipe benders, laser processing machine tools, when they are used as intended and under the conditions foreseen by the manufacturer. Examp...

Machine tools. Environmental evaluation of machine tools - Principles for measuring metal-forming machine tools and laser processing machine tools with respect to energy efficiency

ISO 14955-4:2019 机床 - 机床环境评估 - 第4部分:金属成型机床和激光加工机床的能量测量原理

Machine tools — Environmental evaluation of machine tools — Part 4: Principles for measuring metal-forming machine tools and laser processing machine tools with respect to energy efficiency

JB/T 13640-2019 重型机床 产品分类

Heavy machine tool product classification

JIS B 6190-10:2018 机床试验规程 第10部分：数控机床测头系统测量性能的测定

Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools

ISO/DIS 23125-1:2018 机床安全 车床 第 1 部分：安全要求

Machine tools safety — Turning machines — Part 1: Safety requirements

JIS B 6033:2018 机床 安全 固定式磨床

Machine tools -- Safety -- Stationary grinding machines

T/ZZB 0403-2018 圆锥滚子轴承套圈磨超机床

本标准规定了圆锥滚子轴承套圈磨超机床的术语和定义、基本要求、技术要求、检验方法、检验规则、标志、包装、运输与贮存和质量承诺。 本标准适用于内径φ15mm～φ400mm、外径φ40mm～φ500mm的圆锥滚子轴承套圈磨床和超精机（以下简称磨超机床）。

Grinding and superfinishing machine tools for tapered roller bearing ring

BS ISO 14955-2:2018 机械工具 机床环境评价 测量机床和机床部件能源供应的方法

1   Scope This document describes how measurements are made by providing measuring methods in order to produce reproducible data about the energy supplied to a machine tool under specified conditions. Furthermore, it provides methods to quantify the energy supplied to components in order to assign their share to generalized machine tool functions as described in ISO 14955‑1. It supports the energy-saving design methodology according to ISO 14955‑1 by providing measuring methods for the energy supplied to machine tools . The assignment of the energy supplied to machine tool functions requires measurements at machine tool component level. These measurements need to be reproducible and independent of conditions other than those being recorded and documented. The results of the measurements are intended to document improvements to the design, specifically under energy aspects, and/or to allow evaluating the energy involved in the manufacturing of a given part by a given machine tool . Any comparison requires identical conditions and ensures by specification and measurement that similar results are achieved.

Machine tools. Environmental evaluation of machine tools - Methods for measuring energy supplied to machine tools and machine tool components