25.080.30 拉床 标准查询与下载

GB/T 4680-2023 卧式内拉床 精度检验

Horizontal internal broaching machine accuracy inspection

GB/T 6472-2023 立式内拉床 精度检验

Vertical internal broaching machine accuracy inspection

GB/T 6473-2023 立式外拉床 精度检验

Vertical external broaching machine precision inspection

GB/T 6473-1996 立式外拉床 精度检验

本标准规定了立式外拉床的预调检验和几何精度检验。 本标准还规定了机床主要部件所使用的术语。 本标准适用于额定拉力为63～630kN的立式外拉床的精度检验，不适用于机床的运转检查（振动、不正常的噪声、运动部件的爬行等），或机床的参数检查（速度、进给量等）。这些检查应在精度检验前进行。

Vertical surface broaching machines--Testing of the accuracy

GB/T 6472-1996 立式内拉床 精度检验

本标准规定了立式内拉床的预调水平和几何精度检验以及相应的允差。 本标准还规定了机床主要部件所使用的术语。 本标准适用于额定拉力25～1000kN的立式内拉床的精度检验。不适用于机床的运转检查（振动、不正常的噪声、运动部件的爬行等）或机床的参数检查（速度、进给量等）。这些检查应在精度检验前进行。

Vertical internal broaching machines--Testing of the accuracy

GB/T 6472-1996 立式内拉床 精度检验

Vertical internal broaching machine precision inspection

GB/T6472-1996 立式内拉床 精度检验

Vertical internal broaching machine accuracy inspection

BS ISO 6779:2023 立式内拉床试验条件 准确性测试

Test conditions for vertical internal type broaching machines. Testing of accuracy

ISO 6779:2023 立式内拉床试验条件精度试验

Test conditions for vertical internal type broaching machines — Testing of accuracy

KS B 3280-2023 键槽拉刀

Keyway broaches

ISO 19744:2020 数控拉床的试验条件.精度试验.垂直表面式拉床

This document specifies, with reference to ISO 230-1, the geometric tests on numerically controlled (NC) broaching machines of normal accuracy, with vertical axis acting for cutting operation. The accuracy of rotary axes, if available, is checked with reference to ISO 230-7. This document also specifies, with reference to ISO 230-2, the positioning tests on vertical surface type broaching machines for both linear and rotary axes. This document proposes test pieces containing broached slots and grooves with reference to ISO 230-1, cutting tests under finishing conditions. It also specifies the characteristics and dimensions of the test pieces themselves. This document is intended to supply minimum requirements for assessing the cutting accuracy of the machine. This document also establishes the tolerances for the test results corresponding to general purpose and normal accuracy vertical surface type broaching machines equipped with numerical control. This document explains different concepts or configurations and common features of NC vertical surface type broaching machines which are normally used in the manufacturing of turbine disks. It also provides a terminology and designation of controlled axes with reference to ISO 841. This document deals only with the verification of the accuracy of the broaching machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components), nor to machine characteristics (e.g. speeds, feeds) as such checks are generally carried out before testing the accuracy.

Test conditions for numerically controlled broaching machines — Testing of accuracy — Vertical surface type broaching machines

BS ISO 6481:2019 立式表面型拉床的试验条件 准确性测试

What is ISO 6481 - Test conditions for broaching machines about?    ISO 6481 specifies, with reference to ISO 230-1 , the geometric tests on surface type broaching machines with vertical Z-axis providing the main cutting motion. ISO 6481 specifies the applicable tolerances corresponding to the tests mentioned above for normal accuracy vertical surface-type broaching machines.   ISO 6481 explains different concepts or configurations and common features of vertical surface type broaching machines. ISO 6481 provides related terminology and designation of axes. ISO 6481 deals only with the verification of the accuracy of the broaching machine.   Note: ISO 6481  does not apply to the operational testing of the broaching machine (e.g. vibration, abnormal noise, stick-slip motion of components), nor to broaching machine characteristics (e.g. speeds, feeds) as such checks are generally carried out before testing the accuracy.     Who is

Test conditions for vertical surface type broaching machines. Testing of accuracy

BS ISO 6480:2019 卧式内拉床试验条件 准确性测试

What is ISO 6480 - Test conditions for broaching machines about?    ISO 6480 specifies, with reference to ISO 230-1 , the geometric tests on internal type broaching machines with horizontal Z-axis providing the main cutting motion. ISO 6480 specifies the applicable tolerances corresponding to the tests mentioned above for normal accuracy horizontal internal type broaching machines.   ISO 6480 explains concepts or configurations and common features of horizontal internal type broaching machines. ISO 6480 provides related terminology and designation of axes. ISO 6480   deals only with the verification of the accuracy of the machine.    Note: ISO 6480 does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, the stick-slip motion of components), nor to machine characteristics (e.g. speeds, feeds) as such checks are generally carried out before testing the accuracy.  Who is

Test conditions for horizontal internal type broaching machines. Testing of accuracy

ISO 6480:2019 水平内置式拉床的试验条件 - 精度试验

This document specifies, with reference to ISO 230-1, the geometric tests on internal type broaching machines with horizontal Z-axis providing the main cutting motion. It also specifies the applicable tolerances corresponding to the tests mentioned above for normal- accuracy horizontal internal type broaching machines. This document explains concepts or configurations and common features of horizontal internal type broaching machines. It also provides related terminology and designation of axes. It deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components), nor to machine characteristics (e.g. speeds, feeds) as such checks are generally carried out before testing the accuracy.

Test conditions for horizontal internal type broaching machines — Testing of accuracy

ISO 6481:2019 立式表面拉床试验条件精度试验

This document specifies, with reference to ISO 230-1, the geometric tests on surface type broaching machines with vertical Z-axis providing the main cutting motion. It also specifies the applicable tolerances corresponding to the tests mentioned above for normal- accuracy vertical surface type broaching machines. This document explains different concepts or configurations and common features of vertical surface type broaching machines. It also provides related terminology and designation of axes. This document deals only with the verification of the accuracy of the broaching machine. It does not apply to the operational testing of the broaching machine (e.g. vibration, abnormal noise, stick-slip motion of components), nor to broaching machine characteristics (e.g. speeds, feeds) as such checks are generally carried out before testing the accuracy.

Test conditions for vertical surface type broaching machines — Testing of accuracy

ISO 6779:2019 立式内拉床试验条件精度试验

This document specifies, with reference to ISO 230-1, the geometric tests on vertical internal type broaching machines with vertical Z-axis providing the main cutting motion. It also specifies the applicable tolerances corresponding to the tests mentioned above for normal- accuracy vertical internal type broaching machines. This document explains concepts or configurations and common features of vertical internal type broaching machines. It also provides related terminology and designation of axes. This document deals only with the verification of the accuracy of the broaching machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components), nor to machine characteristics (e.g. speeds, feeds) as such checks are generally carried out before testing the accuracy.

Test conditions for vertical internal type broaching machines — Testing of accuracy

KS C IEC 60505-2019 电气绝缘系统的评估和鉴定

Evaluation and qualification of electrical insulation systems

KS C IEC 60505:2019 电气绝缘系统的评估和鉴定

Evaluation and qualification of electrical insulation systems

ISO/PRF 6779:2018 立式内拉床试验条件精度试验

Test conditions for vertical internal type broaching machines — Testing of accuracy

JB/T 13105.3-2017 直角双立柱立式外拉床 第3部分：技术条件

Right-angle double column vertical external broaching machine Part 3: Technical conditions