25.080.40 钻床 标准查询与下载
共找到 219 条与 钻床 相关的标准，共 15 页
Electric Spindle Part 5: Technical Conditions of Electric Spindle for Drilling
- ICS
- 25.080.40
- CCS
- J52
- 发布
- 2020-04-16
- 实施
- 2021-01-01
Electric spindle Part 6: Technical conditions of electric spindle for engraving and milling
- ICS
- 25.080.40
- CCS
- J52
- 发布
- 2020-04-16
- 实施
- 2021-01-01
Test specifications for accuracy retention of electric spindles
- ICS
- 25.080.40
- CCS
- J52
- 发布
- 2020-04-16
- 实施
- 2021-01-01
Mechanical spindle reliability test specifications
- ICS
- 25.080.40
- CCS
- J52
- 发布
- 2020-04-16
- 实施
- 2021-01-01
Reliability test specifications for electric spindles
- ICS
- 25.080.40
- CCS
- J52
- 发布
- 2020-04-16
- 实施
- 2021-01-01
Specifications for performance testing of electric spindles
- ICS
- 25.080.40
- CCS
- J52
- 发布
- 2020-04-16
- 实施
- 2021-01-01
Electric spindle Part 4: Technical conditions of electric spindle for grinding
- ICS
- 25.080.40
- CCS
- J52
- 发布
- 2020-04-16
- 实施
- 2021-01-01
T/GDMES 0001的本部分规定了数控细微深孔加工装备的几何精度和工作精度的要求及检验方法。
CNC fine deep hole machining equipment一Part 1：Testing of the accuracy
- ICS
- 25.080.40
- CCS
- C356
- 发布
- 2019-06-25
- 实施
- 2019-07-01
T/GDMES 0001的本部分规定了数控细微深孔加工装备的制造和验收的要求。
CNC fine deep hole machining equipment — Part 2：Technical conditions
- ICS
- 25.080.40
- CCS
- C356
- 发布
- 2019-06-25
- 实施
- 2019-07-01
What is ISO 2772 - Box type vertical drilling about? ISO 2772 document specifies, with reference to ISO 230-1, geometrical tests on general purpose and normal accuracy box type vertical drilling machines. ISO 2772 also specifies the applicable tolerances corresponding to the above-mentioned tests. Note- BS ISO 2772:2019 does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.) or to machine characteristics (such as speeds, feeds, etc.), which are generally checked before testing of machine accuracy. Who is ISO 2772 - Box type vertical drilling for? ISO 2772 on Box type vertical drilling is useful for:
Test conditions for box type vertical drilling machines. Testing of the accuracy
- ICS
- 25.080.40
- CCS
- 发布
- 2019-03-31
- 实施
- 2019-03-31
This document specifies, with reference to ISO 230-1, geometrical tests on general purpose and normal accuracy box type vertical drilling machines. It also specifies the applicable tolerances corresponding to the above‐mentioned tests. This document deals only with the verification of accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.) or to machine characteristics (such as speeds, feeds, etc.), which are generally checked before testing of machine accuracy.
Test conditions for box type vertical drilling machines — Testing of the accuracy
- ICS
- 25.080.40
- CCS
- 发布
- 2019-03-25
- 实施
本标准规定了台式钻床用直接驱动电机（以下简称电机）的术语和定义、基本参数、基本要求、技术要求、检测方法、检验规则、铭牌、标志、包装、运输和贮存、质量承诺与服务保证。 本标准适用于交流供电、台式钻床用带控制器的直接驱动工作主轴的电机。
Direct drive motor for bench drilling machine
- ICS
- 25.080.40
- CCS
- C381
- 发布
- 2018-11-23
- 实施
- 2019-03-06
Test conditions for pillar type vertical drilling machines — Testing of the accuracy
- ICS
- 25.080.40
- CCS
- 发布
- 2018-11
- 实施
CNC Milling and Drilling Machine Part 1: Accuracy Inspection
- ICS
- 25.080.40
- CCS
- J54
- 发布
- 2017-01-09
- 实施
- 2017-10-01
CNC Milling and Drilling Machine Part 2: Technical Conditions
- ICS
- 25.080.40
- CCS
- J54
- 发布
- 2017-01-09
- 实施
- 2017-10-01
Cross table vertical drilling machine accuracy inspection
- ICS
- 25.080.40
- CCS
- J54
- 发布
- 2017-01-09
- 实施
- 2017-10-01
Universal radial arm drilling machine technical conditions
- ICS
- 25.080.40
- CCS
- J54
- 发布
- 2017-01-09
- 实施
- 2017-10-01
This International Standard describes, with reference to ISO/R 230, both geometrical and practical tests on general purpose and normal accuracy radial drilling machines with the arm adjustable in height, and gives corresponding permissible deviations which apply. It deals only with the verification of accuracy of the machine. It does not apply to the testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.), or to characteristics (such as speeds, feeds, etc.) which should generally be checked before testing accuracy.
Acceptance conditions for radial drilling machines with the arm adjustable in height -- Testing of accuracy
- ICS
- 25.080.40
- CCS
- 发布
- 2016-12-22
- 实施
This International Standard describes, with reference to ISO/R 230, both geometrical and practical tests on general purpose and normal accuracy turret and single spindle co-ordinate drilling machines with vertical spindle and the corresponding permissible deviations which apply. It deals only with the verification of accuracy of the machine. It does not apply to the testing of the running of the machine (vibrations, abnormal noises, stick-slip motion of components, etc.), or to machine characteristics (speeds, feeds, etc.) which should generally be checked before testing accuracy. As there is great variety in the configuration of these machines, the most common being — box type and variable height table machines, — box type and fixed height table machines, — bridge machines, it is specified that the geometrical tests given in this International Standard shall be selected according to the particular conformation of the machine type considered.
Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle -- Testing of the accuracy
- ICS
- 25.080.40
- CCS
- 发布
- 2016-12-22
- 实施
