25.080.50 磨床和抛光机 标准查询与下载

JB/T 12412-2015 工业罐体砂带抛磨机

本标准规定了工业罐体砂带抛磨机的参数、制造与验收技术要求，儿何精度和工作精度的要求和检验方法及相应的允差。本标准适用于最大加工直径1 000 mm～8 000 mm的丁业罐体砂带抛磨机(以下简称机床)。

Industrial tank- body belt polishing machines

JB/T 7418.2-2015 外圆磨床.第2部分:技术条件

JB/T 7418的本部分规定了一般用途外圆磨床的制造与验收的要求。本部分适用于以下外圆磨床(以下简称机床)：--普通精度级工作台移动式外圆磨床、万能外圆磨床，最大磨削直径50 mm~800 mm、最大磨削长度 150 mm～5 000 mm；--精密级、高精度级工作台移动式外圆磨床、万能外圆磨床，最大磨削直径50 mm~800 mm、最大磨削长度150 mm~5 000 mm；--普通精度级丁作台移动式端面外圆磨床，最大磨削直径50 mm~500 mm、最大磨削长度150 mm~3 000 mm；--普通精度级的砂轮架移动式外圆磨床，最大磨削直径500 mm~2 000 mm、最大磨削长度5 000 mm~15 000 mm。

External cylindrical grinding machines.Part 2: Specifications

JB/T 12413-2015 砂带磨削机床 技术条件

本标准规定了砂带磨削机床(包括数控砂带磨削机床、机床附件等，以下简称机床)的制造与验收技术要求。 本标准适用于砂带磨削机床设计、制造、检验与验收。 各类型的砂带磨削机床可根据其使用性能、结构等特点，编制相应的产品技术条件标准，对技术指标、评定方法和检验项目等规定做出补充和具体化。

Abrasive belt grinding machine.Specifications

JB/T 12407.2-2015 数控立式轴承套圈车磨加工中心 第2部分:精度检验

JB/T 12407的本部分规定了数控立式轴承套圈车磨加工中心的几何精度、工作精度和轴线的定位精度、重复定位精度的要求和检验方法及相应的允差。 本部分适用于工件最大外圆加工直径200mm~400mm、工件最大内孔加工直径160mm~320mm的数控立式轴承套圈车磨加工中心(以下简称机床)。

CNC vertical bearing-ring turning and grinding center.Part 2: Testing of the accuracy

JB/T 12398.1-2015 数控无心外圆砂带磨削机床 第1部分:型式与参数

JB/T 12398的本部分规定了一般用途数控无心外圆砂带磨削机床的型式与参数。 本部分适用于新设计的数控无心外圆砂带磨削机床(以下简称机床)。

NC centerless exlernal cylindrical belt grinding.Part 1: Types and parameters

JB/T 12397.3-2015 数控平面宽砂带磨削机床 第3部分:精度检验

JB/T 12397的本部分规定了数控平面宽砂带磨削机床的几何精度、工作精度的要求、检验方法以及相应的允差。 本部分适用于一般用途的工件传送式数控平面宽砂带磨削机床(以下简称机床)。

NC flat surface grinding machine of wide coated abrasive belt.Part 3: Testing of the accuracy

JB/T 12407.3-2015 数控立式轴承套圈车磨加工中心.第3部分:技术条件

JB/T 12407的本部分规定了数控立式轴承套圈车磨加工中心制造和验收的要求。本部分适用于工件最大外圆加工直径为200 mm~400 mm、工件最大内孔加工直径为160 mm~360 mm数控立式轴承套圈车磨加工中心(以下简称机床)。

CNC vertical bearing-ring turning and grinding center.Part 3: Specifications

JB/T 12397.2-2015 数控平面宽砂带磨削机床 第2部分:技术条件

JB/T 12397的本部分规定了数控平面宽砂带磨削机床的制造和验收技术要求。 本部分适用于一般用途的工件传送式数控平面宽砂带磨削机床(以下简称机床)。

NC flat surface grinding machine of wide coated abrasive belt.Part 2: Specifications

JB/T 12407.1-2015 数控立式轴承套圈车磨加工中心 第1部分:型式与参数

JB/T 12407的本部分规定了数控立式轴承套圈车磨加工中心的型式与参数。 本部分适用于工件最大外圆加工直径为200 mm~400 mm、工件最大内孔加工直径为160 mm~360 mm的数控立式轴承套圈车磨加工中心(以下简称机床)。

CNC vertical bearing-ring turning and grinding center.Part 1: Types and parameters

JB/T 12414.1-2015 可转位刀片周边磨床 第1部分:技术条件

JB/T 12414的本部分规定了可转位刀片周边磨床制造和验收的技术要求。 本部分适用于最大工件内切圆直径至50 mm、最大工件厚度至20 mm的可转位刀片周边磨床(以下简称机床)。

Indexable inserts grinding machines.Part 1: Specifications

GSO ISO 2433:2015 自动化设备 带移动平台的圆柱形和通用外部磨料设备的测试条件 精度测试

This International Standard describes, with reference to ISO 230-1 and ISO 230-2, geometric tests, machining tests and tests for accuracy and repeatability of positioning axes on general purpose and normal-accuracy external cylindrical and universal grinding machines with a movable table. It also specifies the applicable tolerances corresponding to the above-mentioned tests. This International Standard applies to machines with a swing diameter of up to 800 mm and a distance between centres of up to 4000 mm. This International Standard deals only with the verification of the accuracy of the machine. It does not apply to testing the running of the machine (vibration, abnormal noise, stick-slip motion of components, etc.) nor to machine characteristics (such as speeds, feeds, etc.), which should generally be checked before the testing of machine accuracy. This International Standard provides the terminology used for the principal components of the machine and the designation of the axes with reference to ISO 841. NOTE In addition to terms used in two of the three official ISO languages (English and French), this International Standard gives in annex A (informative) the equivalent terms in German and Italian; these terms are published under the responsibility of the member bodies for Germany (DIN) and Italy (UNI). However, only the terms given in the official languages can be considered as ISO terms.

Machine tools -- Test conditions for external cylindrical and universal grinding machines with a movable table -- Testing of accuracy

BS ISO 1985:2015 机床 立式砂轮轴往复工作台平面磨床试验条件 精度试验

Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy

ISO 1985:2015 机床.立轴矩台平面磨床检验条件.精度检验

This International Standard specifies, with reference to ISO 230-1 and ISO 230-7, both geometric and machining tests on general purpose, normal accuracy, manually, and numerically controlled (NC) surface grinding machines with reciprocating table and vertical grinding wheel spindle. It also specifies the applicable tolerances corresponding to the above-mentioned tests. This International Standard is not applicable to surface grinding machines with fixed or rotating tables or to machines having longitudinal traverse of the wheelhead. This International Standard deals only with the verification of the geometric accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to the checking of its characteristics (such as speeds, feeds, etc.), which should generally be checked before testing the accuracy. This International Standard provides the terminology used for the principal components of the machine and the designation of the axes with reference to NOTE In addition to the terms used in the official ISO languages (English and French), this International Standard gives the equivalent terms in the German, Italian, Persian, and Japanese languages in Annex B; these are published under the responsibility of the national member bodies for Germany (DIN), Italy (UNI), Iran (ISIRI), and Japan (JISC). However, only the terms given in the official language can be considered as ISO terms.

Machine tools - Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy

KS B 4058-2014(2020) 电动台式磨床

Electric bench grinders

KS B 4058-2014 台式电磨床

Electric bench grinders

KS B 4203-2014 刮刀磨刀机

Scraper knife grinders

KS B 4202-2014 胶合板磨刀机

Veneer knife grinders

KS B 4203-2014(2020) SCRAPER刀GRINDERS

Scraper knife grinders

KS B ISO 1986-1:2014 水平轴4角矩台型平面磨床.精度检验.第1部分:台长为1600mm以下的磨床

Test conditions for surface grinding machines with horizontal grinding wheel spindle and reciprocating table-Testing of the accuracy-Part 1:Machines with a table length of up to 1 600 mm

KS B ISO 3875:2014 机床.外圆无心磨床试验条件.精度检验

Machine tools — Test conditions for external cylindrical centreless grinding machines — Testing of the accuracy