25.080.60 锯床 标准查询与下载
共找到 170 条与 锯床 相关的标准，共 12 页
UL Standard for Safety Manual and Semiautomatic Metal Sawing Machines (First Edition; Reprint with revisions through and including July 26@ 2017)
- ICS
- 25.080.60
- CCS
- J57
- 发布
- 2013-05-01
- 实施
JB/T 4318的本部分规定了卧式带锯床的几何精度和工作精度的要求及检验方法。本部分适用于最大锯削直径250mm~2000mm的卧式带锯床(以下简称机床)。其他规格的卧式带锯床可参照本部分。
Horizontal band sawing machine.Part 2:Testing of the accuracy
- ICS
- 25.080.60
- CCS
- J57
- 发布
- 2013-04-25
- 实施
- 2013-09-01
JB/T 4318的本部分规定了卧式带锯床制造与验收的技术要求。本部分适用于最大锯削直径250mm~2000mm的卧式带锯床(以下简称机床)。其他规格的卧式带锯床可参照本部分。
Horizontial band sawing machine.Part 3:Specifications
- ICS
- 25.080.60
- CCS
- J57
- 发布
- 2013-04-25
- 实施
- 2013-09-01
JB/T 9930的本部分规定了立式带锯床的系列构成、用途及性能、参数。本部分适用于新设计的立式带锯床(以下简称机床)。
Vertical band sawing machine.Part 1:Types and parameters
- ICS
- 25.080.60
- CCS
- J57
- 发布
- 2013-04-25
- 实施
- 2013-09-01
JB/T 4318的本部分规定了卧式带锯床的系列构成、用途及性能、参数。本部分适用于新设计的卧式带锯床(以下简称机床)。
Horizontal band sawing machine.Part 1:Types and parameters
- ICS
- 25.080.60
- CCS
- J57
- 发布
- 2013-04-25
- 实施
- 2013-09-01
Safety of transportable motor-operated electric tools. Particular requirements for mitre saws
- ICS
- 25.080.60
- CCS
- K64
- 发布
- 2013-02-28
- 实施
- 2013-02-28
Safety of transportable motor-operated electric tools. Particular requirements for mitre saws
- ICS
- 25.080.60
- CCS
- J57
- 发布
- 2013-02-28
- 实施
- 2013-02-28
Safety of transportable motor-operated electric tools - Part 2-1 : particular requirements for circular saw benches
- ICS
- 25.080.60
- CCS
- J65
- 发布
- 2013-02-02
- 实施
- 2013-02-02
Safety of transportable motor-operated electric tools. Particular requirements for circular saw benches
- ICS
- 25.080.60
- CCS
- 发布
- 2013-01-31
- 实施
- 2013-01-31
Safety of transportable motor-operated electric tools. Particular requirements for circular saw benches
- ICS
- 25.080.60
- CCS
- K64
- 发布
- 2013-01-31
- 实施
- 2013-01-31
Safety of transportable motor-operated electric tools. Particular requirements for combined mitre and bench saws
- ICS
- 25.080.60
- CCS
- K64
- 发布
- 2013-01-31
- 实施
- 2013-01-31
Safety of transportable motor-operated electric tools. Particular requirements for combined mitre and bench saws
- ICS
- 25.080.60
- CCS
- K64
- 发布
- 2013-01-31
- 实施
- 2013-01-31
Standard for Safety for Semiautomatic Metal Sawing Machines
- ICS
- 25.080.60
- CCS
- J57
- 发布
- 2013
- 实施
Transportable motor-operated electric tools. Part 2-11. Particular safety requirements and test methods for combined circular saws
- ICS
- 25.080.60
- CCS
- 发布
- 2012
- 实施
- 2014-01-01
Applies to radial arm saws intended for cutting wood or similar materials with a blade diameter not exceeding 260 mm.
Safety of transportable motor - operated electric tools - part 2-2 particular requirements for radial arm saws
- ICS
- 25.080.60
- CCS
- 发布
- 2011-10-12
- 实施
Applies to transportable band saws having a length of saw band not more than 2 500 mm and band wheels having a diameter of not more than 315 mm.
Safety of transportable motor -operated electric tools - part2-5 particular requirements for band saws
- ICS
- 25.080.60
- CCS
- 发布
- 2011-10-12
- 实施
The global description "wall saw and wire saw equipment" contains two differing types of machines for use in the construction industry, and both used to make cuts on walls, ceilings and floors composed of mineral construction materials and/or composite materials. The many different cutting tasks and choice of operating method determine the type of machine to be used for each application. The machines may therefore be split into the following two principal classifications: - Wall saws - exclusively rail guided - transportable. - Wire saws - transportable. The machines are intended for the use of diamond tools. The types of cutting tools used in conjunction with the machines as described above fall within the design and use parameters supplied by the manufacturer. Cutting debris generated by the cutting action is removed from the cutting joint by a medium such as water directed to the cutting tool. Machines covered by this standard may be powered by: electric motor, IC engine, electro-hydraulic drive and IC engine-hydraulic drive. This European Standard deals with all significant hazards, hazardous situations and events relevant to wall saws and wire saws machinery, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards generated by the cutting process work cycle. For special applications, for example, when working in potentially explosive atmospheres, additional safety requirements is necessary which are not covered by this standard. This European Standard does not apply for wire saws intended for quarrying and stationary machining of natural stone as covered by prEN 15163. This European Standard applies primarily to machines which are manufactured after the date of approval by CEN of this standard.
Transportable wall saw and wire saw equipment for job site - Safety
- ICS
- 25.080.60
- CCS
- 发布
- 2011-10-12
- 实施
JB/T 3364的本部分规定了圆锯床的制造与验收的技术条件。 本部分适用于最大圆锯片直径为315 mm～2000 mm的卧式圆锯床、摆式圆锯床和立式圆锯床。 最大圆锯片直径小于315 mm或大于2000 mm的圆锯床可参照本部分使用。
Circular sawing machine.Part 3:Specifications
- ICS
- 25.080.60
- CCS
- J57
- 发布
- 2011-05-18
- 实施
- 2011-08-01
JB/T 9931的本部分规定了卧式弓锯床的制造与验收的技术条件。 本部分适用于最大锯削直径为160 mm～400 mm的卧式弓锯床。 最大锯削直径小于160 mm或大于400 mm的卧式弓锯床可参照本部分使用。
Horizontal hack sawing machine.Part 3:Specifications
- ICS
- 25.080.60
- CCS
- J57
- 发布
- 2011-05-18
- 实施
- 2011-08-01
