25.080.60 锯床 标准查询与下载

JB/T 9931.2-2011 卧式弓锯床.第2部分：精度检验

JB/T 9931的本部分规定了卧式弓锯床的几何精度和工作精度的要求及检验方法。 本部分适用于最大锯削直径160 mm～400 mm的卧式弓锯床。 最大锯削直径小于160 mm或大于400 mm的卧式弓锯床可参照本部分使用。

Horizontal hack sawing machine.Part 2:Testing of the accuracy

JB/T 3364.2-2011 圆锯床.第2部分：精度检验

JB/T 3364的本部分规定了圆锯床的几何精度和工作精度的要求及检验方法。本部分适用于最大圆锯片直径315 mm～2000 mm的卧式圆锯床、摆式圆锯床和立式圆锯床。 最大圆锯片直径小于315 mm或大于2000 mm的圆锯床可参照本部分使用。

Circular sawing machine.Part 2:Testing of the accuracy

JB/T 3364.4-2011 圆锯床.第4部分：主轴端部连接尺寸

JB/T 3364的本部分规定了圆锯床主轴端部连接尺寸。 本部分适用于新设计的冷锯金属的卧式圆锯床、摆式圆锯床和立式圆锯床。

Circular sawing machine.Part 4: Connected dimensions at head of the principal axis

JB/T 3364.1-2011 圆锯床.第1部分：型式与参数

JB/T 3364的本部分规定了圆锯床的系列构成、用途及性能、参数。 本部分适用于新设计的冷锯金属的卧式圆锯床、摆式圆锯床和立式圆锯床。

Circular sawing machine.Part 1:Types and parameters

JB/T 9931.1-2011 卧式弓锯床.第1部分：型式与参数

JB/T 9931的本部分规定了卧式弓锯床的系列构成、用途及性能、参数。 本部分适用于新设计的冷锯金属的卧式弓锯床。

Horizontal hack sawing machine.Part 1:Types and parameters

GOST IEC 61029-2-2-2011 移动式电动工具.旋臂锯试验方法和安全性详细要求

Electric transportable tools. Particular safety requirements and test methods of radial arm saws

GOST IEC 61029-2-1-2011 移动式电动工具.圆锯的试验方法和特定安全性要求

Electric transportable tools. Specific safety requirements and methods of circular saws testing

GOST IEC 61029-2-7-2011 移动式电动工具.注水金刚石锯试验方法和安全性的详细要求

Electric transportable tools. Particular safety requirements and methods of diamond saws with water supply

NF E60-460/IN1:2010 机床.安全性.冷金属锯床.

Machine tools - Safety - Sawing machines for cold metal.

NF E60-460:2010 机床.安全性.冷金属锯床.

Machine tools - Safety - Sawing machines for cold metal.

DIN EN 61029-2-1:2010 便携式电动工具的安全性.第2-1部分:圆锯的详细要求(IEC 61029-2-1-1993,修改件+A1-1999+A2-2001).德文版本EN 61029-2-1-2010

Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saw benches (IEC 61029-2-1:1993, modified + A1:1999 + A2:2001); German version EN 61029-2-1:2010

NF C75-201:2010 移动式电动工具的安全性.第2-1部分:圆锯的详细要求

Safety of transportable motor-operated electric tools - Part 2-1 : particular requirements for circular saw benches.

DIN EN 61029-2-11:2010 便携式马达安全性. 电动工具. 第2-11部分: 组合横切锯和台锯的详细要求（IEC 61029-2-11: 2001, 修改件）; 德文版本EN 61029-2-11: 2009

Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws (IEC 61029-2-11:2001, modified); German version EN 61029-2-11:2009

DIN EN 61029-2-9:2010 移动式电动工具的安全性. 第2-9部分: 斜切锯的详细要求; （IEC 61029-2-9: 1995, 修改件）; 德文版本 EN 61029-2-9: 2009

Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws (IEC 61029-2-9:1995, modified); German version EN 61029-2-9:2009

DS/EN 13898+A1/AC:2010 机床 安全 冷金属锯床

1.1 This standard specifies the safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation, setting-up, maintenance, and repair) of machines whose primary intended use is for sawing cold metal (ferrous and non-ferrous), or material partly of cold metal, by means of a saw blade.1.2 This standard takes into account the intended use, reasonably foreseeable misuse, machine setting and blade fitting, maintenance and cleaning, and their effects on the safety of operators and other exposed persons. It presumes access to the machine from all directions at floor level and addresses both normal op

Machine tools - Safety - Sawing machines for cold metal

LST EN 13898-2004+A1-2009/AC-2010 机床 安全 冷金属锯床

Machine tools - Safety - Sawing machines for cold metal

BS EN 61029-2-11:2010 移动式电动工具的安全 组合横切锯和台锯的特殊要求

Safety of transportable motor-operated electric tools. Particular requirements for combined mitre and bench saws

BS EN 61029-2-9:2010 移动式电动工具的安全 斜切锯的特殊要求

Safety of transportable motor-operated electric tools. Particular requirements for mitre saws

EN 13898+A1/AC:2010 机床.安全性.冷金属锯机

Machine tools - Safety - Sawing machines for cold metal

NF C75-211:2009 便携式电动工具安全性.第2-11部分:横切锯和台锯组合工具的详细要求

Safety of transportable motor-operated electric tools - Part 2-11 : particular requirements for combined mitre and bench saws.