25.100.01 切削工具综合 标准查询与下载

GSO ISO/TS 13399-309:2021 切削刀具数据表示和交换 第309部分：3D 模型的创建和交换 可转位刀片的刀柄

ISO/TS 13399-309:2016 specifies a concept for the design of turning tools for indexable inserts, together with the usage of the related properties and domains of values. ISO/TS 13399-309:2016 specifies a common way of designing simplified models that contain the following: - definitions and identifications of the design features of turning tools for indexable inserts, with an association to the descriptive properties and dimensions; - definition and identification of the 3D model internal structure that represents the features and the properties of turning tools for indexable inserts. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; - concept of 3D models for adaptive items; - concept of 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 309: Creation and exchange of 3D models — Tool holders for indexable inserts

GSO ISO/TS 13399-307:2021 切削刀具数据表示和交换 第307部分：3D 模型的创建和交换 可转位刀片立铣刀

ISO/TS 13399-307:2016 specifies a concept for the design of tool items, limited to any kind end mills for indexable inserts, together with the usage of the related properties and domains of values. ISO/TS 13399-307:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of end mills for indexable inserts, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of end mills for indexable inserts. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for other tool items not being described in the scope of this International Standard; - concept of 3D models for adaptive items; - concept of 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 307: Creation and exchange of 3D models — End mills for indexable inserts

GSO ISO/TS 13399-302:2021 切削刀具数据表示和交换 第302部分：基于 ISO/TS 13399-3 的属性的 3D 模型设计概念：整体钻头和锪孔刀具的建模

ISO/TS 13399-302:2013 specifies a concept for the design of tool items, limited to any kind of drilling and countersinking tools with solid cutting edges, together with the usage of the related properties and domains of values. ISO/TS 13399-302:2013 specifies a common way of designing simplified models that contain: definitions and identifications of the design features of drills and countersinking tools with solid cutting edges, with a link to the properties used; definitions and identifications of the internal structure of the 3D model that represents the features and properties of drills and countersinking tools with solid cutting edges.

Cutting tool data representation and exchange — Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools

GSO ISO/TS 13399-301:2021 切削刀具数据表示和交换 第301部分：基于 ISO/TS 13399-3 的属性的 3D 模型设计概念：螺纹切削丝锥、螺纹成形丝锥和螺纹切削模具的建模

ISO/TS 13399-301:2013 specifies a concept for the design of tool items, limited to any kind of taps and dies, together with the usage of the related properties and domains of values. ISO/TS 13399-301:2013 specifies a common way of designing simplified models that contain: definitions and identifications of the design features of thread-cutting taps, thread-forming taps and thread-cutting dies with solid cutting edges, with a link to the properties used; definitions and identifications of the internal structure of the 3D model that represents the features and properties of thread-cutting taps, thread-forming taps and thread-cutting dies with solid cutting edges.

Cutting tool data representation and exchange — Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies

GSO ISO/TS 13399-311:2021 切削刀具数据表示和交换 第311部分：3D 模型的创建和交换 整体铰刀

ISO/TS 13399-311:2016 specifies a concept for the design of tool items, for all kinds of solid reamers, together with the usage of the related properties and domains of values. ISO/TS 13399-311:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of solid reamers, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of solid reamers. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; - concept of 3D models for adaptive items; - concept of 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 311: Creation and exchange of 3D models — Solid reamers

GSO ISO/TS 13399-310:2021 切削刀具数据表示和交换 第310部分：3D 模型的创建和交换 带硬质合金刀尖的车刀

ISO/TS 13399-310:2017 carbide tips, together with the usage of the related properties and domains of values. ISO/TS 13399-310:2017 carbide tips, together with the usage of the related properties and domains of specifies a common way of designing simplified models that contain the following: - definitions and identifications of the design features of turning tools with carbide tips, with a link to the properties used; - definitions and identifications of the internal structure of the 3D model that represents features and properties of turning tools with carbide tips. The following are outside the scope of this document: - applications where these standard data can be stored or referenced; - creation and exchange of simplified 3D models for cutting tools; - creation and exchange of simplified 3D models for cutting items; - creation and exchange of simplified 3D models for other tool items not being described in the scope of this document; - creation and exchange of simplified 3D models for adaptive items; - creation and exchange of simplified 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 310: Creation and exchange of 3D models — Turning tools with carbide tips

GSO ISO/TS 13399-304:2021 切削刀具数据表示和交换 第304部分：3D模型的创建和交换 带心轴孔的整体铣刀

ISO/TS 13399-304:2016 specifies a concept for the design of tool items, limited to any kind of milling cutters with arbor hole and non-indexable cutting edges, together with the usage of the related properties and domains of values. ISO/TS 13399-304:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of milling cutters with arbor hole and non-indexable cutting edges, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of milling cutters with arbor hole and non-indexable cutting edges. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; - concept of 3D models for adaptive items; - concept of 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 304: Creation and exchange of 3D models — Solid milling cutters with arbor hole

GSO ISO 5611-7:2021 用于可转位刀片的 A 型刀夹 第7部分：R 型

ISO 5611-7:2015 applies for cartridges type A, with hole(s) for fastening screw(s), of style R, i.e. with cutting edge angle κr = 75° for side cutting. Cartridges are intended to be used with indexable inserts made of hard metal, ceramic or other cutting materials and are primarily mounted to be used for internal turning of operations.

Cartridges, type A, for indexable inserts — Part 7: Style R

GSO ISO/TS 13399-71:2021 切削刀具数据表示和交换 第71部分：图形数据布局 标准化数据交换文档的创建：图形产品信息

ISO/TS 13399-71:2016 determines the elements to be used for the creation of 2D documentation. The individual parts of documentation are drawing content, geometrical data, drawing frame and drawing header data as shown in Figure 1. The standardization of drawing formats, e.g. drawing frame, structure of the bill of material, are out of the scope of ISO/TS 13399-71:2016. Furthermore, it is intended to standardize the data exchange of the product documentation. It specifies a common way for the basic principles for the creation of product documentation that contain the following: - definitions and identifications of the elements of a product documentation; - definitions and identifications of the internal structure of the product documentation; - definitions and identifications of those elements and features that are necessary to show the protection notices and the copyrights of the originator of the document. The following are outside the scope of ISO/TS 13399-71:2016: - layer settings as defined in ISO/TS 13399‑70; - structure of the data exchange file using extensible mark-up language (XML); - applications where these standard data may be stored or referenced; - concept of the classification of cutting tool data and their properties; - concept of the design of 2D drawings for cutting tools; - concept of the design of 3D models for cutting tools; - application data for the use of those cutting tools; - information about the reconditioning of cutting tools; - information about additional application and usage data (e.g. coolant supply).

Cutting tool data representation and exchange — Part 71: Graphical data layout — Creation of documents for standardized data exchange: Graphical product information

GSO ISO/TS 13399-308:2021 切削刀具数据表示和交换 第308部分：3D 模型的创建和交换 带心轴孔的可转位刀片铣刀

ISO/TS 13399-308:2016 specifies a concept for the design of tool items, limited to any kind of milling cutters with arbor hole for indexable inserts, together with the usage of the related properties and domains of values. ISO/TS 13399-308:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of milling cutters with arbor hole for indexable inserts, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of milling cutters with arbor hole for indexable inserts. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; - concept of 3D models for adaptive items; - concept of 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 308: Creation and exchange of 3D models — Milling cutters with arbor hole for indexable inserts

GSO ISO 5611-1:2021 用于可转位刀片的 A 型刀夹 第1部分：一般检验、相关性和尺寸确定

ISO 5611-1:2015 is general and is completed by ISO 5611‑2 to ISO 5611‑12. ISO 5611 applied for cartridges, type A, for indexable inserts and gives their styles in relation to their dimensions in accordance with ISO 5611‑2 to ISO 5611‑12. These cartridges are primarily intended for indexable inserts made of hard metal, ceramic or other cutting materials to be used for turning operations. These kinds of cartridges are mainly clamped with one or two screws on the cartridges. Explanation of the designation code according to ISO 5608.

Cartridges, type A, for indexable inserts — Part 1: General survey, correlation and determination of dimensions

GSO ISO/TS 13399-303:2021 切削刀具数据表示和交换 第303部分：3D 模型的创建和交换 整体立铣刀

ISO/TS 13399-303:2016 specifies a concept for the design of tool items, limited to solid (non-indexable) end mills, with the usage of the related properties and domains of values. ISO/TS 13399-303:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of solid (non-indexable) end mills, with a link to the properties used; - definitions and identifications of the internal structure of the 3D model that represents features and properties of solid (non-indexable) end mills. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - creation and exchange of simplified 3D models for cutting tools; - creation and exchange of simplified 3D models for cutting items; - creation and exchange of simplified 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; - creation and exchange of simplified 3D models for adaptive items; - creation and exchange of simplified 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 303: Creation and exchange of 3D models — Solid end mills

GSO ISO/TS 13399-405:2021 切削刀具数据表示和交换 第405部分：3D 模型的创建和交换 夹头

ISO/TS 13399-405:2016 specifies a concept for the design of adaptive items, limited to any kind of collets, clamping sleeves and ferrules, together with the usage of the related properties and domains of values. ISO/TS 13399-405:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of collets, clamping sleeves, and ferrules, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of collets, clamping sleeves, and ferrules. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for tool items; - concept of 3D models for other adaptive items not being described in the scope of this part of ISO 13399; - concept of 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 405: Creation and exchange of 3D models — Collets

GSO ISO 5611-5:2021 用于可转位刀片的 A 型刀夹 第5部分：K 型

ISO 5611-5:2015 applies for cartridges type A, with hole(s) for fastening screw(s), of style K, i.e. with cutting edge angle κr = 75° for end cutting. Cartridges are intended to be used with indexable inserts made of hard metal, ceramic or other cutting materials and are primarily mounted to be used for internal turning of operations.

Cartridges, type A, for indexable inserts — Part 5: Style K

GSO ISO 5611-2:2021 用于可转位刀片的 A 型刀夹 第2部分：F 型

ISO 5611-2:2015 applies for cartridges type A, with hole(s) for fastening screw(s), of style F, i.e. with cutting edge angle κr = 90° for end cutting. Cartridges are intended to be used with indexable inserts made of hard metal, ceramic, or other cutting materials and are primarily mounted to be used for internal turning of operations.

Cartridges, type A, for indexable inserts — Part 2: Style F

GSO ISO/TS 13399-202:2021 切削刀具数据表示和交换 第202部分：3D 模型的创建和交换 不规则刀片

ISO/TS 13399-202:2015 specifies a concept for the design of cutting items, limited to any kind of irregular inserts, with the usage of the related properties and domains of values. It specifies a common way of designing simplified models that contain the following: - definitions and identification of the design features of irregular inserts, with a link to the properties used; - definitions and identification of the internal structure of the 3D model that represents the features and the properties of irregular inserts. The following are outside the scope of this part of ISO 13399: - applications where these standard data may be stored or referenced; - creation and exchange of simplified 3D models for cutting tools; - creation and exchange of simplified 3D models for tool items; - creation and exchange of simplified 3D models for other cutting items not described in this part of ISO 13399; - creation and exchange of simplified 3D models for adaptive items; - creation and exchange of simplified 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 202: Creation and exchange of 3D models — Irregular inserts

GSO ISO/TS 13399-204:2021 切削刀具数据表示和交换 第204部分：3D 模型的创建和交换 铰孔刀片

ISO/TS 13399-204:2016 specifies a concept for the design of cutting items, limited to any kind of replaceable inserts for reaming, using related properties and domains of values. ISO/TS 13399-204:2016 specifies a common way of designing simplified models that contain the following: - definitions and identification of the design features of replaceable inserts for reaming, with a link to the properties used; - definitions and identification of the internal structure of the 3D model that represents the features and the properties of replaceable inserts for reaming; The following are outside the scope of this part of ISO 13399: - applications where these standard data may be stored or referenced; - creation and exchange of simplified 3D models for cutting tools; - creation and exchange of simplified 3D models for tool items; - creation and exchange of simplified 3D models for other cutting items not described in this part of ISO 13399; - creation and exchange of simplified 3D models for adaptive items; - creation and exchange of simplified 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 204: Creation and exchange of 3D models — Inserts for reaming

GSO ISO 5611-4:2021 用于可转位刀片的 A 型刀夹 第4部分：J 型

ISO 5611-4:2015 applies for cartridges type A, with hole(s) for fastening screw(s), of style J, i.e. with cutting edge angle κr = 93° for end cutting. Cartridges are intended to be used with indexable inserts made of hard metal, ceramic or other cutting materials and are primarily mounted to be used for internal turning of operations.

Cartridges, type A, for indexable inserts — Part 4: Style J

GSO ISO 5611-3:2021 用于可转位刀片的 A 型刀夹 第3部分：G 型

ISO 5611-3:2015 applies for cartridges type A, with hole(s) for fastening screw(s), of style G, i.e. with cutting edge angle κr = 90° for side cutting. Cartridges are intended to be used with indexable inserts made of hard metal, ceramic or other cutting materials and are primarily mounted to be used for internal turning of operations.

Cartridges, type A, for indexable inserts — Part 3: Style G

GSO ISO/TS 13399-312:2021 切削刀具数据表示和交换 第312部分：3D 模型的创建和交换 可转位刀片铰刀

ISO/TS 13399-312:2016 specifies a concept for the design of tool items, limited to any kind of reamers for indexable cutting edges, together with the usage of the related properties and domains of values. ISO/TS 13399-312:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of reamers for indexable cutting edges, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represent the features and the properties of reamers for indexable cutting edges. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; - concept of 3D models for adaptive items; - concept of 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 312: Creation and exchange of 3D models — Reamers for indexable inserts