25.100.01 切削工具综合 标准查询与下载

GSO ISO/TS 13399-308:2021 切削刀具数据表示和交换 第308部分：3D 模型的创建和交换 带心轴孔的可转位刀片铣刀

ISO/TS 13399-308:2016 specifies a concept for the design of tool items, limited to any kind of milling cutters with arbor hole for indexable inserts, together with the usage of the related properties and domains of values. ISO/TS 13399-308:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of milling cutters with arbor hole for indexable inserts, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of milling cutters with arbor hole for indexable inserts. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for other tool items not being described in the scope of this part of ISO/TS 13399; - concept of 3D models for adaptive items; - concept of 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 308: Creation and exchange of 3D models — Milling cutters with arbor hole for indexable inserts

GSO ISO/TS 13399-307:2021 切削刀具数据表示和交换 第307部分：3D 模型的创建和交换 可转位刀片立铣刀

ISO/TS 13399-307:2016 specifies a concept for the design of tool items, limited to any kind end mills for indexable inserts, together with the usage of the related properties and domains of values. ISO/TS 13399-307:2016 specifies a common way of design simplified models that contain the following: - definitions and identifications of the design features of end mills for indexable inserts, with an association to the used properties; - definitions and identifications of the internal structure of the 3D model that represents the features and the properties of end mills for indexable inserts. The following are outside the scope of this part of ISO/TS 13399: - applications where these standard data may be stored or referenced; - concept of 3D models for cutting tools; - concept of 3D models for cutting items; - concept of 3D models for other tool items not being described in the scope of this International Standard; - concept of 3D models for adaptive items; - concept of 3D models for assembly items and auxiliary items.

Cutting tool data representation and exchange — Part 307: Creation and exchange of 3D models — End mills for indexable inserts

GSO ISO 5611-3:2021 用于可转位刀片的 A 型刀夹 第3部分：G 型

ISO 5611-3:2015 applies for cartridges type A, with hole(s) for fastening screw(s), of style G, i.e. with cutting edge angle κr = 90° for side cutting. Cartridges are intended to be used with indexable inserts made of hard metal, ceramic or other cutting materials and are primarily mounted to be used for internal turning of operations.

Cartridges, type A, for indexable inserts — Part 3: Style G

JIS B 4054:2020 耐磨工具硬质合金的推荐

Recommendation of cemented carbide for wear resistant tools

JB/T 13683-2020 硬质合金刀片 涂层技术条件

Technical conditions for coating of carbide inserts

BS ISO 22180:2019 CVD 金刚石工具 分类

What is BS ISO 22180 - CVD diamond tools about?    BS ISO 22180 deals with diamond tools whose cutting edges are made of CVD diamond, either as a solid single piece or as a coating.   The tool specifications are differentiated into CVD diamond-coated tools (CVD diamond thin-film coatings) and tools with a CVD diamond cutting insert.   Who is BS ISO 22180 - CVD diamond tools for?   BS ISO 22180 is useful for:   Diamond cutting tool manufacturers   Diamond cutters

CVD diamond tools. Categorization

ISO 22180:2019 CVD金刚石工具分类

This document deals with diamond tools whose cutting edges are made of CVD diamond, either as a solid single piece or as a coating. The tool specifications are differentiated into CVD diamond-coated tools (CVD diamond thin-film coatings) and tools with a CVD diamond cutting insert. According to ISO 513, CVD diamond tools can be classified under “hard coatings of hard metal and ceramic” and “binder-free polycrystalline diamond”. In order to differentiate the CVD diamond tools from tools with monocrystalline synthetic or natural diamond (MCD or monocrystalline diamond) or with sintered diamond with a binder phase (PCD or polycrystalline diamond), the structure and characteristics of MCD and PCD tools with binder phase are also briefly described.

CVD diamond tools — Categorization

JIS B 4127-4:2018 用于可转位刀片的 A 型刀架 第4部分：J 型

Cartridges, type A, for indexable inserts -- Part 4: Style J

JIS B 4127-3:2018 用于可转位刀片的 A 型刀架 第3部分：G 型

Cartridges, type A, for indexable inserts -- Part 3: Style G

JIS B 4127-5:2018 用于可转位刀片的 A 型刀架 第5部分：K 型

Cartridges, type A, for indexable inserts -- Part 5: Style K

JIS B 4127-2:2018 用于可转位刀片的 A 型刀架 第2部分：F 型

Cartridges, type A, for indexable inserts -- Part 2: Style F

JIS B 4127-8:2018 用于可转位刀片的 A 型刀架 第8部分：S 型

Cartridges, type A, for indexable inserts -- Part 8: Style S

JIS B 4127-10:2018 用于可转位刀片的 A 型刀架 第10部分：U 型

Cartridges, type A, for indexable inserts -- Part 10: Style U

JIS B 4127-7:2018 用于可转位刀片的 A 型刀架 第7部分：R 型

Cartridges, type A, for indexable inserts -- Part 7: Style R

JIS B 4127-1:2018 用于可转位刀片的 A 型刀片架 第1部分：尺寸的一般测量、相关性和确定

Cartridges, type A, for indexable inserts -- Part 1: General survey, correlation and determination of dimensions

JIS B 4127-6:2018 用于可转位刀片的 A 型刀架 第6部分：L 型

Cartridges, type A, for indexable inserts -- Part 6: Style L

JIS B 4127-11:2018 用于可转位刀片的 A 型刀架 第11部分：W 型

Cartridges, type A, for indexable inserts -- Part 11: Style W

JIS B 4127-12:2018 用于可转位刀片的 A 型刀架 第12部分：Y 型

Cartridges, type A, for indexable inserts -- Part 12: Style Y

JIS B 4127-9:2018 用于可转位刀片的 A 型刀架 第9部分：T 型

Cartridges, type A, for indexable inserts -- Part 9: Style T

ASTM E1575-18 压力水清洗和切割的标准实践

1.1 This practice covers the personnel requirements, operator training, operating procedures, and recommended equipment performance/design for the proper operation of all types of pressure water-jet cleaning and cutting equipment as normally used by industries concerned with construction, maintenance, repair, cleaning, cutting, and demolition work. 1.2 The term “high-pressure water jetting” covers all water jetting, including the use of additives or abrasives at pressures above 100.5 psig (0.69 MPa). 1.3 Any person required to operate or maintain pressure water-jetting equipment shall have been trained and have demonstrated the ability and knowledge to do so in accordance with the original equipment manufacturer’s instructions, specifications, and training programs. 1.4 The values stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. See 3.2.3, 4.4, 5.7.2, 5.11, 5.14, 6.2, 6.7, and Sections 8 and 11 for specific hazards statements. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Pressure Water Cleaning and Cutting