25.100.01 切削工具综合 标准查询与下载

DIN ISO 3364:2018 有圆柱形固定孔和圆角的可转位硬质合金(碳化)刀片. 尺寸 (ISO 3364-2017)

This international standard specifies the dimensions of indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole and with 0° normal clearance. These inserts are primarily intended to be mounted by top and hole clamping or by hole alone on turning and boring tools.

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole - Dimensions (ISO 3364:2017)

KS B ISO 513-2018(2023) 具有规定切削刃的金属切削用硬质切削材料的分类和应用主要类别和应用类别的命名

Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application

KS B ISO 513:2018 硬质切割材料的分类和应用金属去除与定义的切割边 - 指定主要组和应用组

Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application

KS B ISO 513-2018 硬质切割材料的分类和应用金属去除与定义的切割边 - 指定主要组和应用组

Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application

KS B 3249-2017 超硬刀具材料的提示

Hard tool material tips

ASTM D6287-17 切割薄膜和薄片试样的标准实施规程

1.1 This practice covers equipment and techniques for cutting film and sheeting specimens for testing.2 The specimens are nick-free, non-stretched and can be rapidly prepared. 1.2 The values given in SI units are to be considered standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. NOTE 1—There is no known ISO equivalent to this standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Cutting Film and Sheeting Test Specimens

BS ISO 3364:2017 带圆角的可转位硬质合金（硬质合金）刀片 带有圆柱形固定孔 方面

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole. Dimensions

ISO 3364:2017 带圆柱固定孔圆角硬质合金可转位刀片尺寸

This document specifies the dimensions of indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole and with 0° normal clearance. These inserts are primarily intended to be mounted by top and hole clamping or by hole alone on turning and boring tools.

Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions

DIN ISO 1832:2017 切削刀具用可转位刀片.名称与符号(ISO 1832-2017)

Indexable inserts for cutting tools - Designation (ISO 1832:2017)

BS ISO 1832:2017 用于切削刀具的可转位刀片 指定

Indexable inserts for cutting tools. Designation

ISO 1832:2017 切削刀具用可转位刀片. 名称

This document establishes a code for the designation of the usual types of indexable inserts for cutting tools in hard cutting materials or any other cutting materials, in order to simplify orders and specifications for such inserts . It also specifies the designations for cubic boron nitride (BL, BH, BC ) inserts, tipped and solid, as well as polycrys talline diamond (DP) inserts, tipped.

Indexable inserts for cutting tools - Designation

KS B 3248-2016(2021) 硬工具材料和适用性分类

Hard tool materials and classification of applicability

KS B 3248-2016 硬质刀具材料及适用范围分类

Hard tool materials and classification of applicability

KS B 3268-2016 硬质合金一次性刀片

Cemented carbide throw - away inserts

GSO ISO 5610-1:2016 可转位刀片用矩形柄刀柄 第1部分：尺寸的一般检验、相关性和确定

This part of ISO 5610 specifies tool holders with rectangular shank for indexable inserts and specifies their styles in relation to their dimensions according to ISO 5610-2, ISO 5610-3, ISO 5610-4, ISO 5610-5, ISO 5610-6, ISO 5610-7, ISO 5610-8, ISO 5610-9, ISO 5610-10, ISO 5610-11, ISO 5610-12, ISO 5610-13, ISO 5610-14, and ISO 5610-15. These tool holders are primarily intended for indexable inserts made of hard metal, ceramic, or other cutting materials intended to be mounted by clamping and used for turning operations. This part of ISO 5610 is general and is intended to be used with ISO 5610-2, ISO 5610-3, ISO 5610-4, ISO 5610-5, ISO 5610-6, ISO 5610-7, ISO 5610-8, ISO 5610-9, ISO 5610-10, ISO 5610-11, ISO 5610-12, ISO 5610-13, ISO 5610-14, and ISO 5610-15.

Tool holders with rectangular shank for indexable inserts -- Part 1: General survey, correlation and determination of dimensions

GSO ISO 5610-3:2016 用于可转位刀片的矩形柄刀柄 第3部分：B 型

This part of ISO 5610 specifies tool holders with rectangular shank, style B, i.e. with straight shank and cutting edge angle κr = 75° for side cutting. These tool holders are primarily intended for indexable inserts made of hard metal or other cutting materials intended to be mounted by clamping and be used for turning operations. NOTE The symbols for the dimensions shown in the tables of this part of ISO 5610 and the corresponding preferred symbols of properties defined in ISO/TS 13399-2 and ISO/TS 13399-3 are given in ISO 5610-1:2014, Table A.1.

Tool holders with rectangular shank for indexable inserts -- Part 3: Style B

GSO ISO 5610-4:2016 用于可转位刀片的矩形柄刀柄 第4部分：D 型

This part of ISO 5610 specifies tool holders with rectangular shank, style D, i.e. with straight shank and cutting edge angle κr = 45° for side cutting. These tool holders are primarily intended for indexable inserts made of hard metal or other cutting materials intended to be mounted by clamping and used for turning operations. NOTE The symbols for the dimensions shown in the tables of this part of ISO 5610 and the corresponding preferred symbols of properties defined in ISO/TS 13399-2 and ISO/TS 13399-3 are given in ISO 5610-1:2014, Table A.1.

Tool holders with rectangular shank for indexable inserts -- Part 4: Style D

GSO ISO 5610-7:2016 用于可转位刀片的矩形柄刀柄 第7部分：J 型

This part of ISO 5610 specifies tool holders with rectangular shank, style J, i.e. with offset shank and cutting edge angle κr = 93° for side cutting. These tool holders are primarily intended for indexable inserts made of hard metal or other cutting materials to be mounted by clamping and to be used for turning operations. NOTE The symbols for the dimensions shown in the tables of this part of ISO 5610 and the corresponding preferred symbols of properties defined in ISO/TS 13399-2 and ISO/TS 13399-3 are given in ISO 5610-1:2014, Table A.1.

Tool holders with rectangular shank for indexable inserts -- Part 7: Style J

GSO ISO 5610-12:2016 用于可转位刀片的矩形柄刀柄 第12部分：S 型

This part of ISO 5610 specifies tool holders with rectangular shank, style S, i.e. with offset shank and cutting edge angle κr = 45° for side cutting. These tool holders are primarily intended for indexable inserts made of hard metal or other cutting materials to be mounted by clamping and to be used for turning operations. NOTE The symbols for the dimensions shown in the tables of this part of ISO 5610 and the corresponding preferred symbols of properties defined in ISO/TS 13399-2 and ISO/TS 13399-3 are given in ISO 5610-1:2014, Table A.1.

Tool holders with rectangular shank for indexable inserts -- Part 12: Style S

GSO ISO 5610-11:2016 用于可转位刀片的矩形柄刀柄 第11部分：R 型

This part of ISO 5610 specifies tool holders with rectangular shank, style R, i.e. with offset shank and cutting edge angle κr = 75° for side cutting. These tool holders are primarily intended for indexable inserts made of hard metal or other cutting materials to be mounted by clamping and to be used for turning operations. NOTE The symbols for the dimensions shown in the tables of this part of ISO 5610 and the corresponding preferred symbols of properties defined in ISO/TS 13399-2 and ISO/TS 13399-3 are given in ISO 5610-1:2014, Table A.1.

Tool holders with rectangular shank for indexable inserts -- Part 11: Style R