25.100.01 切削工具综合 标准查询与下载

JB/T 12607-2016 超硬刀具材料性能检测方法

本标准规定了超硬刀具材料性能参数(化学成分、显微组织、冲击韧性、热冲击韧性、断裂韧性、摩擦性能、耐磨性、切削性等)的检测方法。 本标准适用于聚晶金刚石超硬刀具材料、高CBN含量和低CBN含量两大类带粘结剂的聚晶立方氮化硼(PCBN)超硬刀具材料的性能参数检测。

Inspection methods for performance parameters of superhard tools material

JB/T 12611-2016 热装夹头刀柄检测方法

本标准规定了各种热装夹头刀柄共性技术参数的检测方法，对于非共性技术参数的检测方法，则需另行制定检测方法标准。本标准规定的各种检测方法并不是唯一的。 本标准适用于各种热装夹头刀柄的检测。

Inspection methods of tool shanks with shrink chuck

GSO ISO 10643:2015 切割轴附件的尺寸 包括平行扳手和推片

  Scope is not provided for this standard

Dimensions of accessories for cutter arbors with parallel key and tenon drive

BS ISO 5611-9:2015 可转位A型刀夹头.T型

Cartridges, type A, for indexable inserts. Style T

BS ISO 5611-10:2015 可转位A型刀夹头.U型

Cartridges, type A, for indexable inserts. Style U

BS ISO 5611-12:2015 可转位A型刀夹头.Y型

Cartridges, type A, for indexable inserts. Style Y

BS ISO 5611-6:2015 可转位A型刀夹头.L型

Cartridges, type A, for indexable inserts. Style L

BS ISO 5611-5:2015 可转位A型刀夹头.K型

Cartridges, type A, for indexable inserts. Style K

BS ISO 5611-4:2015 可转位A型刀夹头.J型

Cartridges, type A, for indexable inserts. Style J

BS ISO 5611-1:2015 可转位刀片用A型夹头. 尺寸的通用测量, 相关性和测定

Cartridges, type A, for indexable inserts. General survey, correlation and determination of dimensions

BS ISO 5611-8:2015 可转位A型刀夹头.S型

Cartridges, type A, for indexable inserts. Style S

BS ISO 5611-7:2015 可转位A型刀夹头.R型

Cartridges, type A, for indexable inserts. Style R

BS ISO 5611-3:2015 可转位A型刀夹头.G型

Cartridges, type A, for indexable inserts. Style G

BS ISO 5611-2:2015 可转位A型刀夹头.F型

Cartridges, type A, for indexable inserts. Style F

ISO 5611-2:2015 可转位A型刀夹头.第2部分:F型

Cartridges, type A, for indexable inserts - Part 2: Style F

ISO 5611-1:2015 可转位刀片用A型夹头. 第1部分: 尺寸的通用测量, 相关性和测定

This part of ISO 5611 is general and is completed by ISO 5611-2 to ISO 5611-12. ISO 5611 applied for cartridges, type A, for indexable inserts and gives their styles in relation to their dimensions in accordance with ISO 5611-2 to ISO 5611-12. These cartridges are primarily intended for indexable inserts made of hard metal, ceramic or other cutting materials to be used for turning operations. These kinds of cartridges are mainly clamped with one or two screws on the cartridges. Explanation of the designation code according to ISO 5608.

Cartridges, type A, for indexable inserts - Part 1: General survey, correlation and determination of dimensions

ISO 5611-11:2015 可转位A型刀夹头.第11部分:W型

This part of ISO 5611 applies for cartridges type A, with hole(s) for fastening screw(s), of style W, i.e. with cutting edge angle κr = 60° for end cutting. Cartridges are intended to be used with indexable inserts made of hard metal, ceramic or other cutting materials and are primarily mounted to be used for internal turning of operations.

Cartridges, type A, for indexable inserts - Part 11: Style W

ISO 5611-9:2015 可转位A型刀夹头.第9部分:T型

This part of ISO 5611 applies for cartridges type A, with hole(s) for fastening screw(s), of style T, i.e. with cutting edge angle κr = 60° for side cutting. Cartridges are intended to be used with indexable inserts made of hard metal, ceramic or other cutting materials and are primarily mounted to be used for internal turning of operations.

Cartridges, type A, for indexable inserts - Part 9: Style T

ISO 5611-8:2015 可转位A型刀夹头.第8部分:S型

Cartridges, type A, for indexable inserts - Part 8: Style S

ISO 5611-3:2015 可转位A型刀夹头.第3部分:G型

This part of ISO 5611 applies for cartridges type A, with hole(s) for fastening screw(s), of style G, i.e. with cutting edge angle κr = 90° for side cutting. Cartridges are intended to be used with indexable inserts made of hard metal, ceramic or other cutting materials and are primarily mounted to be used for internal turning of operations.

Cartridges, type A, for indexable inserts - Part 3: Style G