25.100.10 车刀 标准查询与下载

BS ISO 5609-3:2012 转位式刀片用带圆柱柄内圆车削的刀架. K型

Tool holders for internal turning with cylindrical shank for indexable inserts. Style K

BS ISO 5609-1:2012 可转位刀片的圆柱形柄内部旋转用夹持装置命名, 样式, 尺寸和纠正计算

Tool holders for internal turning with cylindrical shank for indexable inserts. Designation, styles, dimensions and calculation for corrections

BS ISO 5609-6:2012 可转位刀片的圆柱形柄内部旋转用夹持装置. 样式Q

Tool holders for internal turning with cylindrical shank for indexable inserts. Style Q

BS ISO 5609-5:2012 转位式刀片用带圆柱柄内圆车削的刀架. U型

Tool holders for internal turning with cylindrical shank for indexable inserts. Style U

BS ISO 5609-4:2012 转位式刀片用带圆柱柄内圆车削的刀架. L型

Tool holders for internal turning with cylindrical shank for indexable inserts. Style L

ISO 5609-3:2012 可转位刀片用带圆柱柄内圆车削的工具架 第6部分 K款

This part of ISO 5609 specifies the characteristics of tool holders for internal turning with cylindrical shank, style K, i.e. with reduced shank and cutting edge angle κr = 75°. These tool holders are primarily intended for indexable inserts made of hardmetal, ceramic or other cutting materials to be mounted by clamping and to be used for internal turning operations.

Tool holders for internal turning with cylindrical shank for indexable inserts - Part 3: Style K

ISO 5609-2:2012 可转位刀片用带圆柱柄内圆车削的工具架 第2部分 F型

This part of ISO 5609 specifies the characteristics of tool holders for internal turning with cylindrical shank, style F, i.e. with reduced shank and cutting edge angle κr = 90°. These tool holders are primarily intended for indexable inserts made of hardmetal, ceramic of other cutting materials to be mounted by clamping and to be used for internal turning operations.

Tool holders for internal turning with cylindrical shank for indexable inserts - Part 2: Style F

ISO 5609-1:2012 可转位刀片用带圆柱柄内圆车削的工具架.第1部分:名称、样式、尺寸和修正计算

This part of ISO 5609 specifies the code for the designation, styles, general dimensions and calculation for corrections for tool holders for internal turning with cylindrical shank. It is intended to be used in conjunction with, and is completed by, ISO 5609-2, ISO 5609-3, ISO 5609-4, ISO 5609-5 and ISO 5609-6. These tool holders are primarily intended for indexable inserts made of hardmetal, ceramic or other cutting materials to be mounted by clamping and to be used for internal turning operations. This part of ISO 5609 also incorporates the contents of ISO 6261:201112)) [designation for tool holders with cylindrical shank (boring bars) for indexable inserts].

Tool holders for internal turning with cylindrical shank for indexable inserts - Part 1: Designation, styles, dimensions and calculation for corrections

ISO 5609-5:2012 可转位刀片用带圆柱柄内圆车削的工具架 第6部分 U款

This part of ISO 5609 specifies the characteristics of tool holders for internal turning with cylindrical shank, style U, i. e. with reduced shank and cutting edge angle κr = 93°. These tool holders are primarily intended for indexable inserts made of hardmetal, ceramic or other cutting materials to be mounted by clamping and to be used for internal turning operations.

Tool holders for internal turning with cylindrical shank for indexable inserts - Part 5: Style U

ISO 5609-4:2012 可转位刀片用带圆柱柄内圆车削的工具架 第4部分 L款

This part of ISO 5609 specifies the characteristics of tool holders for internal turning with cylindrical shank, style L, i.e. with reduced shank and cutting edge angle κr = 95°. These tool holders are primarily intended for indexable inserts made of hardmetal, ceramic or other cutting materials to be mounted by clamping and to be used for internal turning operations.

Tool holders for internal turning with cylindrical shank for indexable inserts - Part 4: Style L

ISO 5609-6:2012 可转位刀片用带圆柱柄内圆车削的工具架 第6部分 Q型

This part of ISO 5609 specifies the characteristics of tool holders for internal turning with cylindrical shank, style Q, i.e. with reduced shank and cutting edge angle κr = 107,5°. These tool holders are primarily intended for indexable inserts made of hardmetal, ceramic or other cutting materials to be mounted by clamping and to be used for internal turning operations.

Tool holders for internal turning with cylindrical shank for indexable inserts - Part 6: Style Q

BS ISO 5608:2012 螺纹铣刀片系列用旋转和仿形刀具架和暗盒.名称

Turning and copying tool holders and cartridges for indexable inserts. Designation

ISO 5608:2012 可转位刀片的车削和仿形切削刀夹和刀夹头.名称

Turning and copying tool holders and cartridges for indexable inserts - Designation

ISO 6261:2011 可转位刀片用圆柱柄（镗杆）刀架.名称

This International Standard defines a code for the designation of tool holders for internal turning (boring bars) operations with cylindrical shank and standardized dimension, f, for indexable inserts (see ISO 5609) in order to simplify orders and specifications for such tools. The designation of turning and copying tool holders and of cartridges for indexable inserts with rectangular shank is given in ISO 5608.

Tool holders with cylindrical shank (boring bars) for indexable inserts — Designation

WJ 1478.32-2007 可转位刀具第32部分：75°杠杆夹紧外圆车刀

Indexable tools - Part 32: 75° lever clamping external turning tool

WJ 1478.33-2007 可转位刀具第33部分：90°杠杆夹紧外圆车刀

Indexable tools - Part 33: 90° lever clamping external turning tool

WJ 1478.34-2007 可转位刀具第34部分：75°锥销杠杆夹紧端面车刀

Indexable tools - Part 34: 75° taper pin lever clamping facing tool

WJ 1478.24-2007 可转位刀具第24部分：75°锥销杠杆夹紧外圆车刀

Indexable tools - Part 24: 75° taper pin lever clamping external turning tool

WJ 1478.20-2007 可转位刀具第20部分：75°螺钉压紧外圆车刀

Indexable tools - Part 20: 75° screw fastening external turning tool

WJ 1478.22-2007 可转位刀具第22部分：45°锥销杠杆夹紧外圆车刀

Indexable tools - Part 22: 45° taper pin lever clamping external turning tool