25.100.30 钻头、锪钻、铰刀 标准查询与下载
共找到 962 条与 钻头、锪钻、铰刀 相关的标准，共 65 页
根据GB/T32161《生态设计产品评价通则》及有关要求，高气压潜孔钻头的评价指标从产品全生命周期中对资源和能源的消耗、对生态环境和人体健康影响的角度进行选取，包括资源属性、能源属性、环境属性、产品属性指标，按照全生命周期的理念，在产品设计开发阶段系统考虑原材料选用、生产、销售、使用、回收、处理等各个环节对资源环境造成的影响，力求产品在全生命周期中最大限度降低资源消耗、尽可能少用或不用含有害物质的原材料，减少污染物产生和排放，从而实现环保的目的。评价指标设计主要考虑以现执行的国家标准、行业标准为判定依据，根据产品和行业特点，以评价筛选生态设计产品为目的，在测试及征询行业专家、生产厂商意见的基础上，科学、合理地确定指标基准值。
Technical specification for green-design product assessment High pressure down-the-hole bit
- ICS
- 25.100.30
- CCS
- C351
- 发布
- 2022-09-09
- 实施
- 2022-09-09
Hexagonal handle taper twist drill
- ICS
- 25.100.30
- CCS
- J41
- 发布
- 2022-04-08
- 实施
- 2022-10-01
This document applies to rose bits (countersinks) with stepped cylindrical shanks such as used e. g. for woodworking.
Wood bits - Rose bits (countersinks)
- ICS
- 25.100.30
- CCS
- 发布
- 2022-01-00
- 实施
Carbide threaded shank reamer
- ICS
- 25.100.30
- CCS
- J41
- 发布
- 2021-12-02
- 实施
- 2022-04-01
ISO 235:2016 specifies the dimensions of the following three types of drills: a) parallel shank drills, stub series; b) parallel shank drills, jobber series; c) Morse taper shank drills. It comprises, for each type of drill mentioned above, three tables giving, respectively: a) the dimensions in millimetres; b) the dimension in inches; c) the corresponding lengths, in millimetres and in inches, set out as functions of diameter steps.
Parallel shank jobber and stub series drills and Morse taper shank drills
- ICS
- 25.100.30
- CCS
- 发布
- 2021-07-01
- 实施
本文件规定了无扳手手紧三爪钻夹头的术语和定义、分类、命名、参数及连接方式、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存以及质量承诺。 本文件适用于夹持最大直径为 10 mm 系列和 13 mm 系列螺纹孔连接的无扳手手紧三爪钻夹头（以下简称手紧钻夹头） 。
Keyless type nonautomatic three-jaw drill chucks
- ICS
- 25.100.30
- CCS
- C332
- 发布
- 2021-04-24
- 实施
- 2021-05-27
This document specifies dimensions and technical delivery conditions for hollow augers for woodworking for form A and form B. For hollow augers not covered by this document (e. g. drawing based ones) the application of this document may be subject of agreement between customer an
Wood bits - Plug cutter
- ICS
- 25.100.30
- CCS
- J65
- 发布
- 2021-02-01
- 实施
本标准规定了电锤钻头的术语和定义、型式和尺寸、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存、质量承诺。 本标准适用于在无金属夹杂物的混凝土、砖等材料上钻孔用的直径为5 mm 至52 mm 的电锤钻头。
Hammer drill bit
- ICS
- 25.100.30
- CCS
- C332
- 发布
- 2020-11-23
- 实施
- 2020-12-07
This document specifies dimensions and technical delivery conditions for straight flute bits (straight flute drills) for wood. For straight flute bits for wood not covered by this document (e. g. drawing based ones) the application of this document may be subject of agreement bet
Wood bits - Mortise bit (twisted version)
- ICS
- 25.100.30
- CCS
- J65
- 发布
- 2020-11-01
- 实施
Technical conditions of twist drill for stainless steel
- ICS
- 25.100.30
- CCS
- J41
- 发布
- 2020-04-16
- 实施
- 2021-01-01
Carbide threaded shank drill bit
- ICS
- 25.100.30
- CCS
- J41
- 发布
- 2020-04-16
- 实施
- 2021-01-01
High speed steel aviation extension drill
- ICS
- 25.100.30
- CCS
- J41
- 发布
- 2020-04-16
- 实施
- 2021-01-01
High speed steel threaded shank twist drill
- ICS
- 25.100.30
- CCS
- J41
- 发布
- 2020-04-16
- 实施
- 2021-01-01
High speed steel hexagonal handle twist drill
- ICS
- 25.100.30
- CCS
- J41
- 发布
- 2020-04-16
- 实施
- 2021-01-01
Internally cooled replaceable blade shovel drill
- ICS
- 25.100.30
- CCS
- J41
- 发布
- 2020-04-16
- 实施
- 2021-01-01
