25.120.40 电化学加工机床 标准查询与下载
共找到 68 条与 电化学加工机床 相关的标准，共 5 页
Machine tools - Safety - Electro Discharge Machines.
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 2009-04-01
- 实施
Machine tools - Safety - Electro Discharge Machines.
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 2009-04-01
- 实施
- 2009-04-11
本标准规定了电解去毛刺机的技术要求。 本标准适用于电解去毛刺机（以下简称“机床”）。
Electrolytic debtIrring macllines.Technical requirements
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 2007-08-01
- 实施
- 2008-01-01
JB/T 5770的本部分规定了立式电解成形机的工作台、主轴头、加工电源的基本参数。 本部分适用于新设计的立式电解成形机（以下简称 “机床”）。
Vertical electrolytic forming machine tools Part 1: Parameters
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 2006-11-27
- 实施
- 2007-05-01
JB/T 5770的本部分规定了立式电解成形机的附件和工具、安全防护、加工和装配质量、机床运转试验、机床精度检验 、标志与随机技术文件、包装与贮存等技术要求。 本部分适用于立式电解成形机（以下简称“机床”）。
Vertical electrolytic forming machine tools Part 3: Technical requirements
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 2006-11-27
- 实施
- 2007-05-01
本标准规定了电解加工机床的通用技术要求。 本标准适用于各类电解加工机床（以下简称“机床”）。
Electrolytic machine tools General technical requirements
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 2006-11-27
- 实施
- 2007-05-01
JB/T 5770的本部分引用GB/T 17421.1和GB/T 17421.2规定了一般用途、常规精度的立式电解成形 机的几何精度检验、数控轴定位精度和重复定位精度的检验及加工检验。本部分还规定了与上述检验相对应的允差值。 本部分适用于十字工作台型和固定工作台型的立式电解成形机。 本部分仅涉及机床精度的检验，而不适用于机床运行试验（振动、异常噪声、零部件的爬行等）或其参数（如速度、进给量等）的检查，这些检查通常应在精度检验前进行。 本部分还规定了用于机床主要部件的术语，并参照GB/T 19660-2005（见参考文献[1]）规定了坐标轴的命名。
Vertical electrolytic forming machine tools Part 2: Testing of accuracy
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 2006-11-27
- 实施
- 2007-05-01
この規格は， JIS B 6191， JIS B 6192及びJIS B 6194に基づいてシングルコラム形及び門形の普通精度のはん(汎)用ワイヤ放電加工機の静的精度，位置決め精度，工作精度及び円運動検査について規定する。
Machine tools -- Test conditions for wire electrical-discharge machines (wire EDM) -- Testing of the accuracy
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 2006-07-20
- 实施
JB/T 10330的本部分规定了高速电火花小孔加工机的参数。 本部分适用于新设计的高速电火花小孔加工机。
High speed electro-discharge small hole drilling machines Part 2:Parameters
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 2004-03-12
- 实施
- 2004-08-01
Export non-traditional machine tools.Rules for the inspection of wire electro-discharge machines
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 2001-12-30
- 实施
- 2002-06-01
1.1 This standard specifies technical safety requirements and measures, applicable to EDM equipment and EDM system (e.g. for spark erosion-sinking, spark erosion-wire cutting), to be adopted by persons undertaking the design, construction, installation and/or supply of such equipment. This standard also includes information to be provided by the manufacturer to the user. 1.2 The design requirements of this standard shall not apply to arc eroding and electro chemical machining equipment. 1.3 This standard takes account of the intended use in normal workshop environment and non explosive atmospheres including installation, setting, maintenance, repair and dismantling for removal or disposal of EDM equipment. 1.4 This standard also applies to auxiliary devices essential for EDM processing. 1.5 This standard deals with specific hazards defined in clause 4, Table 1, and the measures of prevention in clause 5, Table 2. 1.6 This standard applies to machines built after its date of issue. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC.
Machine tools - Safety - Electro discharge machines
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 2001-09-06
- 实施
- 2001-09-06
1 This standard specifies technical safety requirements and measures, applicable to EDM equipment and EDM system (e.g. for spark erosion-sinking, spark erosion-wire cutting), to be adopted by persons undertaking the design, construction, installation and/or supply of such equipment. This standard also includes information to be provided by the manufacturer to the user. 2 The design requirements of this standard shall not apply to arc eroding and electro chemical machining equipment. 3 This standard takes account of the intended use in normal workshop environment and non-explosive atmospheres including installation, setting, maintenance, repair and dismantling for removal or disposal of EDM equipment. 4 This standard also applies to auxiliary devices essential for EDM processing. 5 This standard deals with specific hazards defined in clause 4, Table 1, and the measures of prevention in clause 5, Table 2. 6 This standard applies to machines built after its date of issue. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered by this European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC.
Machine tools - Safety - Electro discharge machines
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 2001-09-06
- 实施
- 2001-09-06
Machine tools. Safety. Electro-discharge machines
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 2001-09-06
- 实施
- 2013-08-31
This standard specifies technical safety requirements and measures, applicable to EDM equipment and EDM system (e. g. for spark erosion-sinking, spark erosion-wire cutting), to be adopted by persons undertaking the design, construction, installation and/or supply of such equipment.This standard also includes information to be provided by the manufacturer to the user. The design requirements of this standard shall not apply to arc eroding and electro chemical machining equipment.This standard takes account of the intended use in normal workshop environment and non explosive atmospheres including installation, setting, maintenance, repair and dismantling for removal or disposal of EDM equipment.This standard also applies to auxiliary devices essential for EDM processing.This standard deals with specific hazards defined in clause 4, Table 1, and the measures of prevention in clause 5, Table 2.This standard applies to machines built after its date of issue. NOTE Directive 94/9/EC concerning equipment and protective systems intended for use in potentially explosive atmospheres can be applicable to the type of machine or equipment covered byThis European Standard. The present standard is not intended to provide means of complying with the essential health and safety requirements of Directive 94/9/EC.
Machine tools - Safety - Electro discharge machines Incorporates Amendment A1: 2009
- ICS
- 25.120.40
- CCS
- 发布
- 2001-07-01
- 实施
本标准规定了电火花加工机床用各种操作指示形象化符号。 本标准适用于电火花加工机床及其附件的操作指示标牌、操作面板和标志等。
Electro-discharge machines.Symbols for indications appearing
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 2000-08-31
- 实施
- 2001-01-01
本标准规定了往复走丝（高速走丝）电火花线切割机的安全防护，加工和装配质量，机床空运转试验，机床精度检验，机床负荷试验，标志与使用说明书和包装、运输与贮存的技术要求。 本标准适用于一般用途、常规精度的模具及零件加工用的往复走丝（高速走丝）电火花线切割机。
Wire electro-discharge machines.Techenical requirements
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 2000-01-04
- 实施
- 2000-06-01
Machine tools -- Test conditions for wire electrical discharge machines (wire EDM) -- Terminology and testing of the accuracy
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 1999-12-20
- 实施
この規格は， JIS B 6191及びJIS B 6192に基づいて，普通精度のはん(汎)用門形形彫り放電加工機(EDM)の静的精度検査，工作精度検査及び位置決め精度検査について規定する。
Machine tools -- Test conditions for die-sinking electro-discharge machines (EDM) -- Terminology and testing of accuracy -- Part 2: Two column machines (slide-head type and cross-slide table type)
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 1999-12-20
- 实施
この規格は，JIS B 6191及びJIS B 6192に基づいて，普通精度のはん(汎)用シングルコラム形形彫り放電加工機(EDM)の静的精度検査，工作精度検査及び位置決め精度検査について規定する。
Machine tools -- Test conditions for die-sinking electro-discharge machines (EDM) -- Terminology and testing of accuracy -- Part 1: Single column machines (cross slide table type and fixed table type)
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 1999-12-20
- 实施
本标准规定了用于电火花成形机的自动灭火器的型号与规格，技术要求，试验方法，检验规则，标志与使用说明书，包装与贮存。 本标准适用于使用可燃性工作液的电火花成形机用自动灭火器。
Automatic fire extinguishers for die sinking electro-discharge machines.Technical requirements
- ICS
- 25.120.40
- CCS
- J59
- 发布
- 1999-10-08
- 实施
- 2000-03-01
