25.140.10 气动工具 标准查询与下载
共找到 252 条与 气动工具 相关的标准，共 17 页
This International Standard specifies a method of performance tests and technical conditions for the supply of pneumatic tools and gives detailed instructions on the measurement of power output and air consumption and means of adjusting the measured values to specified conditions.
Rotary and percussive pneumatic tools -- Performance tests
- ICS
- 25.140.10
- CCS
- 发布
- 2015-09-03
- 实施
本标准规定了气动铆钉机用窝头的型式与尺寸、技术要求、验收规则、标志、包装、运输与贮存。本标准适用于气动铆钉机用窝头(以下简称窝头)。
Snap for pneumatic riveting hammers
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2014-05-06
- 实施
- 2014-10-01
本标准规定了纯扭式气动螺丝刀的型式与基本参数、技术要求、检验方法、检验规则、标志、包装、运输与贮存。本标准适用于纯扭式气动螺丝刀(以下简称产品)。
Non-impact pneumatic screwdrivers
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2014-05-06
- 实施
- 2014-10-01
This International Standard relates to shanks for pneumatic tools and corresponding chuck bushings and deals with the following types : — coal pick shanks; — chisel shanks; — rivet snap shanks, parallel; — rivet snap shanks, tapered; — breaker and spade shanks; — concrete breaker shanks; — rock drill shanks. The types relate to the machine for which they are mainly designed, but this does not prevent the use of the shanks for other applications. Other types of tools will be dealt with in further International Standards when the corresponding studies are completed. Pneumatic hammers and their chuck bushings are not covered by this International Standard but those features of chuck bushings (dimensions and tolerances) which ensure interchangeability are specified. For each tool mentioned above, this International Standard provides tables giving dimensions in millimetres. Dimensions in inches are given in the annex which be valid for five years from the date when this International Standard is approved.
Shanks for pneumatic tools and fitting dimensions of chuck bushings
- ICS
- 25.140.10
- CCS
- 发布
- 2013-12-31
- 实施
本标准规定了液压拉铆枪的术语和定义、型号编制与基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于以液压为动力,用丁拉铆钉安装的液压拉铆枪(以下简称产品)。
Pistol-grip hydraulic rivet driver
- ICS
- 25.140.10
- CCS
- J20
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了手持式气动倒角机的分类、型号编制、基本参数、技术要求、试验方法、检验规则和标志、包装、运输和贮存。本标准适用于以压缩空气为动力、适用于去除钢材锐角的气动倒角机(以下简称产品)。
Pneumatic chamfering machines
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了气动液压千斤顶的基本参数、技术要求、试验方法、检验规则和标志、包装、运输和贮存。本标准适用于以压缩空气为动力的液压千斤顶(以下简称产品)。
Pneumatic hydraulic jacks
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2013-12-31
- 实施
- 2014-07-01
Rotary tools for threaded fasteners－Performance test method
- ICS
- 25.140.10
- CCS
- 发布
- 20131230
- 实施
- 20131230
Rotary tools for threaded fasteners－Performance test method
- ICS
- 25.140.10
- CCS
- 发布
- 2013-12-30
- 实施
Hand-held pneumatic assembly tools for installing threaded fasteners－Reaction torque and torque impulse measurements
- ICS
- 25.140.10
- CCS
- 发布
- 2013-12-27
- 实施
Rotary and percussive pneumatic tools－Performance tests
- ICS
- 25.140.10
- CCS
- 发布
- 20131203
- 实施
- 20131203
Shanks for pneumatic tools and fitting dimensions of chuck bushings
- ICS
- 25.140.10
- CCS
- 发布
- 2013-12-03
- 实施
Rotary and percussive pneumatic tools－Performance tests
- ICS
- 25.140.10
- CCS
- 发布
- 2013-12-03
- 实施
Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012); German version EN ISO 11148-12:2012
- ICS
- 25.140.10
- CCS
- J47
- 发布
- 2013-05
- 实施
Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012); German version EN ISO 11148-3:2012
- ICS
- 25.140.10
- CCS
- J47
- 发布
- 2013-05
- 实施
Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012); German version EN ISO 11148-4:2012
- ICS
- 25.140.10
- CCS
- J48
- 发布
- 2013-05
- 实施
Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012); German version EN ISO 11148-6:2012
- ICS
- 25.140.10
- CCS
- K64
- 发布
- 2013-05
- 实施
Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012)
- ICS
- 25.140.10
- CCS
- 发布
- 2013-04-30
- 实施
- 2013-04-30
Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012)
- ICS
- 25.140.10
- CCS
- 发布
- 2013-04-30
- 实施
- 2013-04-30
