25.140.20 电动工具 标准查询与下载

T/ZSM 0013-2022 电线连接工具 充电式电动液压压线钳

本文件规定了电线连接工具充电式电动液压压线钳的型号与参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。

Wire connection tool-Rechargeable battery hydraulic crimping tool

T/ZZB 2859-2022 锂电电动扳手

本文件规定了锂电电动扳手的术语和定义、型式和基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本文件适用于一般环境条件下，使用锂离子电池供电的电动冲击扳手（以下称为“锂电扳手”）。 本文件不适用于定扭矩和定扭矩定转角电扳手、多头组合式电扳手和装拆特殊式螺纹零件的其它专用电扳手（如棘轮式电扳手、剪切式电扳手）。

Lithium ion battery electric wrenches

T/ZZB 2968-2022 锂电电锤

本文件规定了锂电电锤的术语和定义、基本参数和型号、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本文件适用于一般环境条件下，使用锂离子电池供电的用于对大理石、混凝土、人造和天然石料及类似材料上钻孔、凿等作业的旋转电锤。 本文件不适用于使用者自行安装通用电池包（电池组）为动力源的电锤，以及其它非锂离子电池为动力源的电锤。

Lithium ion battery powered rotary hammers

T/ZZB 0223-2022 手持式电圆锯

本文件规定了手持式电圆锯的术语和定义、型号、分类和基本参数、基本要求、技术要求、试验方 法、检验规则、标志、包装、储存、质量承诺。 本文件适用于手持式电圆锯，在下文中简称为圆锯。本文件不适用于使用砂轮的锯和电池供电的电 圆锯。

Handhold electric circular saws

BS EN 62841-2-1:2018+A12:2022 电动手持工具、可移动工具以及草坪和园林机械 安全 手持式钻机和冲击钻机的特殊要求

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety - Particular requirements for hand-held drills and impact drills

BS EN 62841-2-1:2018+A1:2022 电动手持工具、可移动工具以及草坪和园林机械 安全 手持式钻机和冲击钻机的特殊要求

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to hand-held drills and impact drills, including diamond core drills. This document also applies to drills that can be used for driving screws by attaching screwdriver bits. This document does not apply to rotary hammers, screwdrivers, impact wrenches and ratchet drivers even if they can be used as a drill. This document covers all significant hazards, hazardous situations or hazardous events relevant for tools covered by this document. corresponding hazards are either not relevant for tools covered by this document or do not require specific action by the designer.

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety - Particular requirements for hand-held drills and impact drills

BS EN IEC 62841-3-5:2022+A11:2022 电动手持工具、可移动工具以及草坪和园林机械 安全 移动式带锯的特殊要求

Addition: This document applies to band saws intended for cutting wood and analogous materials, plastics and metals, except magnesium. This document does not apply to transportable scroll saws and jig saws with a reciprocating blade. This document does not apply to – hand-held band saws; – non-vertical saws; and – wire saws. This document does not apply to stationary band saws intended to cut wood and similar materials. Stationary band saws that are intended to cut wood and similar materials are covered by EN 1807-1. This document applies to band saws having a mass of: – maximum 25 kg for tools capable of being lifted by hand by one person; – maximum 50 kg for tools capable of being lifted by hand by two persons.

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety - Particular requirements for transportable band saws

BS EN 62841-3-10:2015+A1:2022 电动手持工具、可移动工具以及草坪和园林机械 安全 移动式切割机的特殊要求

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable cut-off machines intended to cut materials such as metals, concrete and masonry and to be fitted with one abrasive – bonded reinforced wheel of Type 41, or – diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mm and with – a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s with the maximum wheel diameter and – a wheel diameter range of 250 mm to 410 mm. This standard does not apply to: – transportable mitre saws; – transportable tile saws; – transportable metal saws. future part of IEC 62841-3. Transportable metal saws will be covered by a future part of IEC 62841-3. This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable cut-off machines intended to cut materials such as metals, concrete and masonry and to be fitted with one abrasive – bonded reinforced wheel of Type 41, or – diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mm and with – a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s with the maximum wheel diameter and – a wheel diameter range of 250 mm to 410 mm. This standard does not apply to: – transportable mitre saws; – transportable tile saws; – transportable metal saws. future part of IEC 62841-3. Transportable metal saws will be covered by a future part of IEC 62841-3. This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable cut-off machines intended to cut materials such as metals, concrete and masonry and to be fitted with one abrasive – bonded reinforced wheel of Type 41, or – diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mm and with – a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s with the maximum wheel diameter and – a wheel diameter range of 250 mm to 410 mm. This standard does not apply to: – transportable mitre saws; – transportable tile saws; – transportable metal saws. future part of IEC 62841-3. Transportable metal saws will be covered by a future part of IEC 62841-3. This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable cut-off machines intended to cut materials such as metals, concrete and masonry and to be fitted with one abrasive – bonded reinforced wheel of Type 41, or – diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mm and with – a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s with the maximum wheel diameter and – a wheel diameter range of 250 mm to 410 mm. This standard does not apply to: – transportable mitre saws; – transportable tile saws; – transportable metal saws. future part of IEC 62841-3. Transportable metal saws will be covered by a future part of IEC 62841-3.

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety - Particular requirements for transportable cut-off machines

BS EN 62841-3-6:2014+A12:2022 电动手持工具、可移动工具以及草坪和园林机械 安全 带液体系统的可移动金刚石钻头的特殊要求

This clause of Part 1 is applicable except as follows: Addition: This part of IEC 62841 applies to transportable diamond drills, intended to be connected to a liquid system. Liquid system may include liquid from a pipe or container. This document covers all significant hazards, hazardous situations or hazardous events relevant for tools covered by this standard. hazards are either not relevant for tools covered by this document or do not require specific action by the designer.

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety - Particular requirements for transportable diamond drills with liquid system

BS EN 62841-3-10:2015+A12:2022 电动手持工具、可移动工具以及草坪和园林机械 安全 移动式切割机的特殊要求

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety - Particular requirements for transportable cut-off machines

IEC 62841-4-6:2022 电动手持工具、便携式工具和草坪和园艺机械 安全 第 4-6 部分：园艺吹风机、园艺真空吸尘器和园艺吹风机/真空吸尘器的特殊要求

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-6: Particular requirements for garden blowers, garden vacuums and garden blower/vacuums

IEC 62841-4-6:2022 EXV 电动手持式工具、可移动工具以及草坪和园艺机械的安全 第4-6部分:花园鼓风机、花园吸尘器和花园鼓风机/吸尘器的特殊要求

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-6: Particular requirements for garden blowers, garden vacuums and garden blower/vacuums

BS EN 62841-1:2015+A11:2022 电动手持工具、可移动工具以及草坪和园林机械 安全 一般要求

1   Scope This International Standard deals with the safety of electric motor-operated or magnetically driven: — hand-held tools (IEC 62841‑2); — transportable tools (IEC 62841‑3); — lawn and garden machinery (IEC 62841‑4). The above listed categories are hereinafter referred to as “tools” or “machines”. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in K.1 and L.1. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Tools with electric heating elements are within the scope of this standard. Requirements for motors not isolated from the supply, and having basic insulation not designed for the

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery. Safety - General requirements

KS C IEC 60745-2-22-2022 手持式电动工具 安全 第2-22部分：切割机的特殊要求

Hand-held motor-operated electric tools — Safety — Part 2-22: Particular requirements for cut-off machines

KS C IEC 60745-2-16-2022 手持式电动工具 安全 第2-16部分：敲钉器的特殊要求

Hand-held motor-operated electric tools — Safety — Part 2-16: Particular requirements for tackers

KS C IEC 60745-2-14-2022 手持式电动工具 安全 第2-14部分：

Hand-held motor-operated electric tools — Safety — Part 2-14:

KS C IEC 61029-2-11-2022 移动式电动工具 安全 第2部分 11：斜接台锯的特殊要求

Transportable motor-operated electric tools－Safety－Part 2－11：Particular requirements for mitre-bench saws

KS C IEC 60745-2-20-2022 手持式电动工具 安全 第2-20部分：带锯的特殊要求

Hand-held motor-operated electric tools — Safety — Part 2-20: Particular requirements for band saws

KS C IEC 60745-2-19-2022 手持式电动工具 安全 第2-19部分：接头工的特殊要求

Hand-held motor-operated electric tools — Safety — Part 2-19: Particular requirements for jointers

KS C IEC 60745-2-17-2022 手持式电动工具 安全 第2-17部分：刳刨机和修剪机的特殊要求

Hand-held motor-operated electric tools — Safety — Part 2-17: Particular requirements for routers and trimmers