25.140.20 电动工具 标准查询与下载

KS C IEC 60745-2-3-2022 手持式电动工具 安全 第2-3部分：磨床、抛光机和盘式砂光机的特殊要求

Hand-held motor-operated electric tools — Safety — Part 2-3: Particular requirements for grinders, polishers and disktype sanders

KS C IEC 60745-2-17-2022 手持式电动工具 安全 第2-17部分：刳刨机和修剪机的特殊要求

Hand-held motor-operated electric tools — Safety — Part 2-17: Particular requirements for routers and trimmers

EN IEC 62841-3-5:2022 电动手持工具、可移动工具和草坪和园林机械 安全 第 3-5 部分：可移动带锯的特殊要求

IEC 62841-3-5:2022 applies to band saws intended for cutting wood and analogous materials, plastics and metals, except magnesium. This document does not apply to transportable scroll saws and jig saws with a reciprocating blade. This document does not apply to hand-held band saws; non-vertical saws; and wire saws. NOTE 101 It is planned that a document on transportable scroll saws and jig saws will be published. NOTE 102 Hand-held band saws will be covered by a future part of IEC 62841-2. NOTE 103 In Europe (EN IEC 62841-3-5), the following conditions apply: This document does not apply to stationary band saws intended to cut wood and similar materials. Stationary band saws that are intended to cut wood and similar materials are covered by EN 1807-1. This document applies to band saws having a mass of: - maximum 25 kg for tools capable of being lifted by hand by one person; - maximum 50 kg for tools capable of being lifted by hand by two persons.

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-5: Particular requirements for transportable band saws

T/ZZB 2771-2022 手持式电动钉枪

本文件规定了手持式电动钉枪的术语和定义、 分类、 基本参数、基本要求、技术要求、试验方法、检验规则、 标志、 说明书、 包装、运输、贮存及质量承诺。 本文件适用于普通用途的手持式电动钉枪（以下简称“钉枪”） 。 本文件不适用于工业产品设备的钉枪。

Hand-held motor-operated electric tackers

T/ZZB 2776-2022 手持式锂电钢筋捆扎机

本文件规定了手持式锂电钢筋捆扎机（以下简称钢筋捆扎机）的术语与定义、基本参数与使用条件、基本要求、技术要求、检验方法、检验规则、标识、包装、运输和储存与质量承诺。 本文件适用于钢筋混凝土结构中的钢筋绑扎工程以及其他固定捆扎等领域。

Handheld lithium battery powered rebar tying machine

T/ZZB 2745-2022 电动冲击扳手

本文件规定了电动冲击扳手的基本参数和型式、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存、附件和备件、质量承诺。 本文件适用于一般环境条件下，采用冲击离合器机构，利用冲击力矩完成装拆螺纹件用的单相串激动冲击扳手（以下简称电扳手）。 本文件不适用于定扭矩（电流控制型）和定扭矩定转角（电流、角度控制型）电扳手、多头组合式电扳手和装拆特殊型式螺纹零件的其他专用电扳手（如棘轮式电扳手、剪切式电扳手等）。

Electric impact wrenches

GSO IEC 62841-4-4:2022 电动手持工具、可移动工具以及草坪和园林机械 安全 第4-4部分：草坪修剪机、草坪修边机、割草机、割灌机和割灌锯的特殊要求

IEC 62841-4-4:2020 This document applies to hand-held and walk-behind lawn trimmers and lawn edge trimmers, used by a standing operator for cutting grass, weeds or similar soft vegetation, and grass trimmers, brush cutters and brush saws used by a standing operator for cutting grass, weeds, brush, bushes, saplings and similar vegetation. This document does not apply to – hand-held machines having a mass of 18 kg or greater; – self-propelled lawn trimmers or lawn edge trimmers; – scissors type lawn trimmers and lawn edge trimmers; – machines equipped with metallic cutting accessories consisting of more than one piece, e.g. pivoting chains or flail blades; – edgers with rigid and/or metallic cutting devices. Annex EE provides an informative summary of characteristics for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws. Brush cutters and brush saws covered by this document are designed only to be operated with the machine to the right of the operator.

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-4: Particular requirements for lawn trimmers, lawn edge trimmers, grass trimmers, brush cutters and brush saws

GSO IEC 62841-2-4:2022 电动手持式工具、可移动工具以及草坪和园林机械 安全 第2-4部分：除盘式以外的手持式砂光机和抛光机的特殊要求

IEC 62841-2-4:2014 applies to hand-held sanders and polishers with the exception of disc-type tools covered by IEC 62841-2-3. Tools covered by this standard include but are not limited to belt sanders, drum sanders or polishers, reciprocating sanders or polishers, orbital sanders or polishers and random orbit sanders or polishers. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. Key words: Sander, Polisher, Belt, Drum Orbital, Reciprocating, Random Orbit This publication is to be read in conjunction with IEC 62841-1:2014. The contents of the corrigendum of October 2015 have been included in this copy.

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-4: Particular requirements for hand-held sanders and polishers other than disc type

GSO IEC 62841-2-2:2022 电动手持式工具、可移动工具以及草坪和园林机械 安全 第2-2部分：手持式螺丝刀和冲击扳手的特殊要求

IEC 62841-2-2:2014 deals with the safety of electric motor-operated or magnetically driven hand-held screwdrivers and impact wrenches. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. Key words: Hand-held, Screwdriver, Impact wrench This publication is to be read in conjunction with .> The contents of the corrigendum of October 2015 have been included in this copy.

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-2: Particular requirements for hand-held screwdrivers and impact wrenches

GSO IEC 62841-2-5:2022 电动手持式工具、可移动工具以及草坪和园林机械 安全 第2-5部分：手持式圆锯的特殊要求

IEC 62841-2-5:2014 applies to hand-held circular saws. This standard does not apply to saws designed for use with abrasive wheels. Saws designed for use with abrasive wheels as cut-off machines are covered by IEC 62841-2-22. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools is given in Annex K. This standard deals with the hazards presented by tools which are encountered by all persons in the normal use and reasonably foreseeable misuse of the tools. Hand-held electric tools, which can be mounted on a support or working stand for use as fixed tools without any alteration of the tool itself, are within the scope of this standard and such combination of a hand-held tool and a support is considered to be a transportable tool and thus covered by the relevant Part 3. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 36 months from the date of publication. Key words: Saw, Circular, Cutting, This publication is to be read in conjunction with IEC 62841-1:2014.

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-5: Particular requirements for hand-held circular saws

IEC 62841-4-2:2017/AMD1:2022 修改件1.电动手持工具、可移动工具以及草坪和花园机械的安全性.第4-2部分:树篱修剪机的特殊要求

Amendment 1 - Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers

IEC 62841-4-2:2017+AMD1:2022 CSV 电动手持工具、可移动工具、草坪和花园机械的安全第4-2部分:树篱修剪机的特殊要求

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 4-2: Particular requirements for hedge trimmers

T/ZGWJHXH 55-2022 新能源车载电动无油活塞式空气压缩机

本标准规定了新能源车载电动无油活塞式空气压缩机（以下简称空压机）的分类、型号编制、基本参数、技术、要求、试验方法、检测规则、标志、包装、运输和存贮。 本标准适用于由额定功率为0.25-3.0KW的单相/三相、直流/交流电动机驱动的、额定转速小于或等于2200r/min及额定排气压力不超过1.0MPa的空压机。

New energy car electric oil-free piston air compressor

IEC 62841-3-10:2015/AMD1:2022 电动手持工具、可移动工具、草坪和花园机械的安全第3-10部分:可移动切断机的特殊要求

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines

IEC 62841-3-10:2015+AMD1:2022 CSV 电动手持工具、可移动工具、草坪和花园机械的安全第3-10部分:可移动切断机的特殊要求

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-10: Particular requirements for transportable cut-off machines

IEC 62841-3-6:2014/AMD1:2022 电动手持工具、可移动工具、草坪和花园机械的安全第3-6部分:带液体系统的可移动金刚石钻头的特殊要求

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system

IEC 62841-3-6:2014+AMD1:2022 CSV 电动手持工具、可移动工具、草坪和花园机械的安全第3-6部分:带液体系统的可移动金刚石钻头的特殊要求

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-6: Particular requirements for transportable diamond drills with liquid system

IEC 62841-3-5:2022 电动手持工具、可移动工具及草坪和花园机械的安全第3-5部分:可移动带锯的特殊要求

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-5: Particular requirements for transportable band saws

IEC 63370:2022 锂离子电池和充电系统.安全性

Lithium-ion batteries and charging systems - Safety

T/ZZB 2688-2022 手持式锂电按摩器

本文件规定了手持式锂电按摩器的术语和定义、基本参数和型号、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本文件适用于家用、运动健身及类似场所使用的由锂离子电池供电，额定电压不超过42 V的保健按摩器。 本文件不适用于作为医疗用途的保健按摩器具。

Hand-held lithium ion battery powered massagers