25.140.99 其他手持工具 标准查询与下载

T/QGCML 3958-2024 理发剪生产技术规范

本文件规定了理发剪生产技术规范的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于理发剪的生产和检验。

Technical specification for production of hair clippers

23/30469868 DC BS EN 15895 粉末驱动手持式固定和硬标记工具 安全要求

BS EN 15895. Powder actuated hand-held fixing and hard marking tools. Safety requirements

T/SBX 061-2022 农用锄头

本文件规定了农用锄头的分类、规格型号、技术要求、试验方法、检验规则、标志、包装、运输、贮存等要求。本标准将农用锄头分为板锄、条锄和蛇柄锄三大类，并分别给出相关技术要求。采用45#带钢或废弃的钢轨为原料，经过加热、锻打、防锈等工艺制造而成。

Farm Hoe

T/SBX 062-2022 农用甘蔗刀

本文件规定了农用甘蔗刀的分类、规格型号、技术要求、试验方法、检验规则、标志、包装、运输、贮存等要求。 本文件所指甘蔗刀是以砍伐甘蔗为主的一种农用工具，也可以砍伐竹子和秸秆比较坚硬的农作物。

agricultural sugar cane knife

T/YYWJ 002-2022 塑胶管剪切刀

本文件规定了塑胶管剪切刀的术语和定义、产品分类、技术要求、试验方法、检验规则及包装、标志、运输与贮存。 本文件适用于手动剪切管子外径3mm—75mm的塑胶管剪切刀，一般用于给排水、液体输送、电工线管等施工环节。

plastic pipe cutter

T/ZZB 2135-2021 金属管割刀

本文件规定了金属管割刀的术语和定义、分类与标记、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本文件适用于手动切割外径小于 168 mm，壁厚小于 5 mm 的普通碳素钢管、不锈钢管、铜管、铝管等黑色金属管与有色金属管的金属管割刀。

Metal pipe cutter

CSA 2.29-2021 用于燃气的手持式手电筒

Hand-held torches for fuel gases

T/QGCML 010-2020 手推车产品检验规范

本标准规定了手推车产品的检验目的、内容和方法。 本标准适用于所有手推车产品的检验。

Specifications for inspection of trolley products

DIN EN 15895:2018 弹药推动手持工具. 安全要求. 打钉和硬标记工具; 德文版本EN 15895-2011+A1-2018

This European Standard contains safety requirements for cartridge operated fixing and hard marking tools which operate with an intermediate member (piston). To EN 15895:2011 the following changes are included: a) adjustment to EN ISO 12200:2010; b) Requirement on carrying box adjusted (5.2); c) Requirements on essential dimensions added (5.3.4); d) Requirements on surface temperatures added (5.4.3); e) Requirements on safe retention of the piston adjusted (5.6); f) Verification of essential dimensions added (6.3.3); g) Adjustment of the temperature verification (6.5); h) Verification of the safe piston retention adjusted (6.6); i) essential safety dimensions added as Annex F; j) editorial adjustment.

Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools; German version EN 15895:2011+A1:2018

BS EN 15895:2011+A1:2018 弹药筒操作的手持工具 安全要求 固定和硬标记工具

What is BS EN 15895 - Cartridge operated hand-held tools about?    BS EN 15895 covers safety requirements for cartridge operated fixing and hard marking tools which operate with an intermediate member (piston).   BS EN 15895 deals with all significant hazards, hazardous situations and events relevant to cartridge operated fixing and hard marking tools, when they are used as intended and under conditions of misuse which are reasonably foreseeable. BS EN 15895 deals with the significant hazards in the different operating modes and intervention procedures as referred to in EN ISO 12100:2010 , 5.4, 5.5, 5.6".

Cartridge operated hand-held tools. Safety requirements. Fixing and hard marking tools

EN 15895:2011+A1:2018 墨盒操作的手持式工具 安全要求 固定和硬标记工具

This European standard covers safety requirements for cartridge operated fixing and hard marking tools which operate with an intermediate member (piston). This European standard deals with all significant hazards, hazardous situations and events relevant to cartridge operated fixing and hard marking tools, when they are used as intended and under conditions of misuse which are reasonably foreseeable (see Clause 4). It deals with the significant hazards in the different operating modes and intervention procedures as referred to in !EN ISO 12100:2010, 5.4, 5.5, 5.6". Although the safe use of cartridge operated tools depends to an important extent on the use of appropriate cartridges and fasteners, this standard is not formulating requirements for the cartridges and fasteners to be used with the tools (see Clause 7). This European Standard applies to tools designed for use with cartridges with casings made of metal or plastic and with solid propellant and containing a minor quantity of primer with a composition different from that of the main propellant. The fixing tools in the scope are those intended for use with fasteners made from metal. NOTE Information about cartridges can be found in the publication of the Permanent International Commission for the Proof of Small Arms (C.I.P.). This European standard is not applicable to cartridge operated fixing and hard marking tools which are manufactured before the date of its publication as EN.

Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools

ASTM F3151-17 从动钢柱传动锚栓系统的标准规范

1.1 This standard provides an alternative to the use of concrete footings for the purpose of installing steel post framework to support chain link, expanded metal, welded wire mesh, wood, ornamental, rigid PVC, and composite fence. 1.2 This standard is not intended to include all methods available to support fence post framework. 1.3 This standard does not intend to preclude any practice that has proven equal to or given better performance under varying conditions such as location, weather, or intended use. 1.4 The values stated in inch-pound units are to be regarded as standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Driven Steel Post Drive Anchor System

T/ZZB 0196-2017 林业机械 便携手持式油锯

本标准规定了便携手持式油锯（以下简称“油锯”）的术语和定义，型号编制方法，设备、仪器及测量精度要求，基本要求，技术要求及试验方法，检验规则，标志、使用说明书、包装、运输和贮存，质量保证。 本标准适用于林用油锯和修枝油锯。

Forestry machinery - portable hand - held chain - saws

JB/T 11756-2013 手持液压剪扩器

本标准规定了手持液压剪扩器的术语和定义、型号与基本参数、技术要求,试验方法、检验规则、标志、包装、运输和贮存。本标准适用于手持液压剪扩器(以下简称为产品)的设计、制造、检验和使用。

Hand-hold hydraulic shearing expander

JB/T 11755-2013 手持液压扩张器

本标准规定了手持液压扩张器的术语和定义、型号与基本参数、技术要求,试验方法、检验规则、标志、包装、运输和贮存。本标准适用于手持液压扩张器(以下简称为产品)的设计、制造、检验和使用。

Hand-hold hydraulic expander

JB/T 11241-2011 手持式液压钳

本标准规定了手持式液压钳的术语和定义、型号与基本参数、技术要求，检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于手持式液压钳（以下简称产品）。

Hand-held hydraulic clamps

JB/T 11240-2011 手持式液压剪

本标准规定了手持式液压剪的术语和定义、型式与基本参数、技术要求、检验方法、检验规则、标志、包装、运输和贮存。 本标准适用于手持式液压剪（以下简称产品）。

Hand-held hydraulic shears

LST EN 15895-2011 墨盒操作的手持式工具 安全要求 固定和硬标记工具

Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools

DIN EN 15895:2011 弹药推动手持工具.安全要求.打钉和硬标记工具;德文版本EN 15895-2011

This European standard covers safety requirements for cartridge operated fixing and hard marking tools which operate with an intermediate member (piston). This European standard deals with all significant hazards, hazardous situations and events relevant to cartridge operated fixing and hard marking tools, when they are used as intended and under conditions of misuse which are reasonably foreseeable.

Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools; German version EN 15895:2011

DS/EN 15895:2011 墨盒操作的手持式工具 安全要求 固定和硬标记工具

This European standard covers safety requirements for cartridge operated fixing and hard marking tools which operate with an intermediate member (piston).This European standard deals with all significant hazards, hazardous situations and events relevant to cartridge operated fixing and hard marking tools, when they are used as intended and under conditions of misuse which are reasonably foreseeable (see Clause 4). It deals with the significant hazards in the different operating modes and intervention procedures as referred to in EN ISO 12100-1:2003, 5.3.Although the safe use of cartridge operated tools depends to an important extent on the use of appropriat

Cartridge operated hand-held tools - Safety requirements - Fixing and hard marking tools