25.160.01 标准查询与下载
共找到 906 条与 相关的标准，共 61 页
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 7: Overlay welding
- ICS
- 25.160.01
- CCS
- 发布
- 2018-12-17
- 实施
Qualification testing of welders for underwater welding — Part 1: Hyperbaric wet welding
- ICS
- 25.160.01
- CCS
- 发布
- 2018-12-17
- 实施
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 7: Overlay welding
- ICS
- 25.160.01
- CCS
- 发布
- 2018-12-17
- 实施
Qualification testing of welders for underwater welding — Part 1: Hyperbaric wet welding
- ICS
- 25.160.01
- CCS
- 发布
- 2018-12-17
- 实施
Qualification testing of welders for underwater welding — Part 1: Hyperbaric wet welding
- ICS
- 25.160.01
- CCS
- 发布
- 2018-12-17
- 实施
This document specifies requirements for the qualification of welders and welding operators for the fusion welding of metallic materials for aerospace applications. NOTE Success in the test is an essential precondition for the qualification of welders (3.2) and welding operators (3.3) in new production and repair work in aerospace. However, welding equipment operators (3.4) do not need to be qualified according to this document.
Welding for aerospace applications — Qualification test for welders and welding operators — Fusion welding of metallic components
- ICS
- 25.160.01
- CCS
- 发布
- 2018-12-13
- 实施
What is this standard about? This document provides concepts, specification and qualification of 2G HTS joining procedure. A welding procedure specification (WPS) is needed to provide a basis for planning joining operations and for quality control during joining. Joining is considered as a special process in the terminology of standards for quality systems. Standards for quality systems usually require that special processes be carried out in accordance with written procedure specifications. This has resulted in the establishment of a set of rules for qualification of the joining procedure prior to the release of the WPS to actual production. This document defines these rules. This document does not cover soldering, brazing or any fillers, which are currently available in the industry. It can be applied for joining of all kinds of 2G HTSs. This document does not apply to 1st Generation Bismuth Strontium Calcium Copper Oxide (1G BSCCO) type HTS and Low Temperature Superconductor (LTS) Joining.
Welding. Micro joining of 2nd generation high temperature superconductors - General requirements for the procedure
- ICS
- 25.160.01
- CCS
- 发布
- 2018-11-30
- 实施
- 2018-11-30
What is this standard about? This document specifies the qualification requirements for personnel performing micro-joining and oxygenation anneling, and testing the 2G HTS test joints.
Welding. Micro joining of 2nd generation high temperature superconductors - Qualification for welding and testing personnel
- ICS
- 25.160.01
- CCS
- 发布
- 2018-11-30
- 实施
- 2018-11-30
Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience
- ICS
- 25.160.01
- CCS
- 发布
- 2018-11-29
- 实施
Welding — Guidelines for quality requirements for heat treatment in connection with welding and allied processes
- ICS
- 25.160.01
- CCS
- 发布
- 2018-11-29
- 实施
Welding — Guidelines for quality requirements for heat treatment in connection with welding and allied processes
- ICS
- 25.160.01
- CCS
- 发布
- 2018-11-29
- 实施
Welding — Guidelines for quality requirements for heat treatment in connection with welding and allied processes
- ICS
- 25.160.01
- CCS
- 发布
- 2018-11-29
- 实施
Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience
- ICS
- 25.160.01
- CCS
- 发布
- 2018-11-29
- 实施
This document specifies the requirements for the qualification of welding personnel for friction stir spot welding (FSSW) of aluminium. In this document, the term "aluminium" refers to aluminium and its alloys. This document does not apply to personnel exclusively performing loading or unloading of the automatic welding unit.
Friction stir spot welding — Aluminium — Part 3: Qualification of welding personnel
- ICS
- 25.160.01
- CCS
- 发布
- 2018-11-27
- 实施
This document specifies the qualification requirements for personnel performing micro-joining and oxygenation anneling, and testing the 2G HTS test joints.
Welding - Micro joining of 2nd generation high temperature superconductors - Part 2: Qualification for welding and testing personnel
- ICS
- 25.160.01
- CCS
- 发布
- 2018-10-00
- 实施
This document provides concepts, specification and qualification of 2G HTS joining procedure. A welding procedure specification (WPS) is needed to provide a basis for planning joining operations and for quality control during joining. Joining is considered as a special process in the terminology of standards for quality systems. Standards for quality systems usually require that special processes be carried out in accordance with written procedure specifications. This has resulted in the establishment of a set of rules for qualification of the joining procedure prior to the release of the WPS to actual production. This document defines these rules. This document does not cover soldering, brazing or any fillers, which are currently available in the industry. It can be applied for joining of all kinds of 2G HTSs. This document does not apply to 1st Generation Bismuth Strontium Calcium Copper Oxide (1G BSCCO) type HTS and Low Temperature Superconductor (LTS) Joining.
Welding - Micro joining of 2nd generation high temperature superconductors - Part 1: General requirements for the procedure
- ICS
- 25.160.01
- CCS
- 发布
- 2018-09-00
- 实施
This document based on DIN EN ISO 9606-1 for qualification test. DIN EN ISO 9606-1 applies for qualification of fusion welders in the field of joint connections. This addition to DIN EN ISO 9606-1 applies particularly for qualification of welders for overlay welding in the field of corrosion protection as well as hard facing.
Qualification testing of welders - Fusion welding - Overlay welding
- ICS
- 25.160.01
- CCS
- 发布
- 2018-07-01
- 实施
本标准规定了气割表样板的特征、结构参数、制造和测定方法。 本标准适用于气割表面质量样板的评定。
Thermal cutting.Model of surface quality for gas cutting
- ICS
- 25.160.01
- CCS
- J33
- 发布
- 2018-04-01
- 实施
- 2018-04-01
Qualification test of welders - Fusion welding - Part 6: Cast irons
- ICS
- 25.160.01
- CCS
- 发布
- 2018-04-01
- 实施
本标准规定了本商会生产的船用焊丝的产品分类、技术要求、试验方法和检验规则、标志和包装等。
Marine welding wire
- ICS
- 25.160.01
- CCS
- C419
- 发布
- 2017-09-01
- 实施
- 2018-08-07
