25.160.10 焊接工艺 标准查询与下载

T/CWAN 0070-2023 铸铝搅拌摩擦焊接技术规范

本文件规定了YL101、YL102、YL104、YL112、YL113、YL117、YL302等铸造铝合金搅拌摩擦焊接的技术要求和制造工艺。 本文件适用于汽车行业及其它行业焊接厚度为0.5 mm~8 mm的铸铝材质部件的搅拌摩擦焊接制造，包括但不限于汽车领域的电控盒、电机壳、电池托盘等，其接头形式有对接、搭接和锁底接头等。

Technical specification for friction stir welding of cast aluminum

T/CASME 525-2023 超声波塑料焊接技术要求

本文件规定了超声波塑料焊接的术语和定义、焊接材料、焊接原理、焊接条件、焊接方法、焊接仪器、注意事项及持续改进。

Technical requirements for ultrasonic plastic welding

ISO/PRF TR 22824:2023 焊接 不锈钢焊缝金属中铁素体规格和测量的最佳实践

Welding — Best practices for specification and measurement of ferrite in stainless steel weld metal

DB37/T 2486-2023 起重机械钢结构焊接工艺评定指南

Guidelines for Welding Procedure Evaluation of Lifting Machinery Steel Structures

T/CZII 012-2023 钢板焊接工艺要求

为规范工业产品生产要求，针对汽车后视镜进行规定，通过对汽车后视镜的技术要求、试验方法、检验规则等制造参数及工艺标准进行规定，以提高汽车后视镜产品性能，助力推动社会绿色可持续发展，特制定本标准。

Steel plate welding process requirements

T/HEBQIA 152-2023 汽车底盘分总成焊接技术规范

本文件规定了汽车底盘分总成结构件生产的焊接技术的总体要求、焊接参数、焊接工艺、焊接方式和焊接产品表面检查。

Automobile chassis sub-assembly welding technical specification

T/CWAN 0093-2023 大型耐磨件硬面堆焊推荐工艺规范

本文件规定了大型耐磨件硬面堆焊工艺相关的术语和定义、技术要求、工艺评定、质量检验方式和要求，以及包装、贮藏和运输。 本文件适用于大型耐磨构件以及复杂结构件堆焊和修复。

Recommended process specification for hard surfacing welding of large wear-resistant parts

23/30459702 DC BS EN ISO 14373 电阻焊 无涂层和涂层低碳钢点焊程序

BS EN ISO 14373. Resistance welding. Procedure for spot welding of uncoated and coated low carbon steels

23/30458743 DC BS EN ISO 15614-13 金属材料焊接工艺规范和鉴定 焊接工艺试验 第 13 部分：镦焊（电阻对接）和闪光焊

BS EN ISO 15614-13. Specification and qualification of welding procedures for metallic materials. Welding procedure test - Part 13. Upset (resistance butt) and flash welding

BS EN ISO 15610:2023 金属材料焊接工艺规范和鉴定 基于测试焊接耗材的鉴定

1   Scope This document specifies how a welding procedure can be qualified by using tested welding consumable data. It expands on the requirements given in ISO 15607. In addition, it gives the range of qualification. This document is applicable to the welding processes according to Table 1. Table 1 — Applicable welding processes Process number according to ISO 4063:2009 Welding process 111 Manual metal arc welding (metal arc welding ...

Specification and qualification of welding procedures for metallic materials. Qualification based on tested welding consumables

EN ISO 15610:2023 金属材料焊接程序的规范和认可.基于试验消耗品的认可

This document specifies how a welding procedure can be qualified by using tested welding consumable data. It expands on the requirements given in ISO 15607. In addition, it gives the range of qualification. Application of this document is limited to parent material groups 1.1, 8.1, 21, 22.1 and 22.2 in accordance with ISO/TR 15608, which produce acceptable microstructures and properties in the heat-affected zone which do not deteriorate significantly in service. This document is limited to: — parent material thicknesses t ≤ 40 mm (groups 1.1 and 8.1) and t ≤ 20 mm (groups 21, 22.1 and 22.2); — fillet welds with throat thickness a ≥ 1 mm. This document is not applicable when any of the following is specified for the welded joint: a) hardness; b) impact properties; c) preheating; d) controlled heat input; e) interpass temperature; f) post-weld heat treatment. The use of this document can also be restricted by an application standard, specification or other documents.

Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2023)

ISO 15610:2023 金属材料焊接程序规范和合格鉴定.基于试验焊接消耗品的合格鉴定

This document specifies how a welding procedure can be qualified by using tested welding consumable data. It expands on the requirements given in ISO 15607. In addition, it gives the range of qualification. This document is applicable to the welding processes according to Table 1. Table 1 — Applicable welding processes Process number according to Welding process 111 Manual metal arc welding (metal arc welding with covered electrode) 114 Self-shielded tubular cored arc welding 121 Submerged arc welding with solid wire electrode 131 MIG welding with solid wire electrode 132 MIG welding with flux-cored electrode 133 MIG welding with metal cored electrode 135 MAG welding with solid wire electrode 136 MAG welding with flux cored electrode 138 MAG welding with metal cored electrode 141 TIG welding with solid filler material (wire/rod) 15 Plasma arc welding 311 Oxyacetylene welding Application of this document is limited to parent material groups 1.1, 8.1, 21, 22.1 and 22.2 in accordance with ISO/TR 15608, which produce acceptable microstructures and properties in the heat-affected zone which do not deteriorate significantly in service. This document is limited to: — parent material thicknesses t ≤ 40 mm (groups 1.1 and 8.1) and t ≤ 20 mm (groups 21, 22.1 and 22.2); — fillet welds with throat thickness a ≥ 1 mm. This document is not applicable when any of the following is specified for the welded joint: a) hardness; b) impact properties; c) preheating; d) controlled heat input; 1 e) interpass temperature; f) post-weld heat treatment. The use of this document can also be restricted by an application standard, specification or other documents.

Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables

DB51/T 2972-2022 车载电子设备结构件的真空钎焊工艺要求

本文件规定了车载电子设备结构件的真空钎焊工艺要求。 本文件适用于车载电子设备结构件1070A、1060、1050A、1035、1200、8A06、3A21、6061、6063等铝及铝合金材料的真空钎焊。

Vacuum brazing process requirements for structural parts of vehicle-mounted electronic equipment

KS B ISO 17671-3:2022 焊接.金属材料焊接的建议.第3部分:不锈钢电弧焊接

Welding — Recommendations for welding of metallic materials — Part 3: Arc welding of stainless steels

KS B ISO 17660-2-2022 焊接.钢筋焊接.第2部分:非承载焊接接头

Welding — Welding of reinforcing steel — Part 2: Non load-bearing welded joints

KS B ISO 17660-2:2022 焊接.钢筋焊接.第2部分:非承载焊接接头

Welding — Welding of reinforcing steel — Part 2: Non load-bearing welded joints

KS B ISO 17671-4-2022 焊接.金属材料焊接的建议.第4部分:铝和铝合金的电弧焊接

Welding — Recommendations for welding of metallic materials — Part 4: Arc welding of aluminium and aluminium alloys

KS B ISO 14373:2022 电阻焊.无涂层和涂层低碳钢的点焊程序

Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels

KS C ISO 18594-2022 电阻点焊、凸焊和缝焊.铝和钢材料过渡电阻的测定方法

Resistance spot-, projection-, and seam-welding — Method for determining the transition resistance on aluminium and steel material

KS B ISO 14373-2022 电阻焊.无涂层和涂层低碳钢的点焊程序

Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels